2905635
Official DistributorSKU
PHX2905635
MPN
MINI MCR-2-V8-MOD-TCP
Weight
0.202 kg
This product is Not Cancellable/Not Returnable
Series MINI-MCR
MINI MCR-2-V8-MOD-TCP - Communication module
Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/TCP network via a communication adapter.
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| Product family | MINI Analog Pro |
Insulation characteristics: GB Standard
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Rated Insulation Voltage | 50 Vrms |
| Test voltage, input/output/supply | 0.5 kV |
| Maximum temperature coefficient | 0.01 % |
| Maximum transmission error | 0.1 % |
Supply
| Nominal supply voltage range | 12 V ... 24 V |
| Supply Voltage Range | 9.6 V ... 30 V |
| Typical current consumption | 130 mA (at 9.6 V DC) |
| Power consumption | < 1200 mW |
Input data
| Available Input Sources | floating switch contact |
| Available Input Sources | Current source |
| Number of Inputs | 8 |
| Configurable/programmable | Yes |
| Current Input Signal | 4 mA ... 20 mA |
| Maximum input current | 24 mA |
| Input resistance current input | 50 Ω |
| Maximum input voltage | 5 V |
Output data
| Protocols Supported | Modbus/TCP |
| Number of Outputs | 1 |
| Configurable/programmable | Yes |
| Transmission Speed | 10 Mbps |
| Transmission Speed | 100 Mbps |
| Data update rate | 15 ms |
Output
| Connection Method | RJ45 |
| Number of Positions | 8 |
Ex data
| Ex installation (EPL) | Gc |
| Ex installation (EPL) | Div. 2 |
Signaling
| Status display | Green LED |
| Error indication | Red LED |
Dimensions
| Width | 51.1 mm |
| Height | 104.1 mm |
| Depth | 61 mm |
Material specifications
| Color | gray (RAL 7042) |
| Housing Material | PBT 7% GF V0 |
Ambient conditions
| Degree of Protection | IP20 (Finger safety) |
| Ambient Temperature (Operation) | -40 °C ... 55 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Altitude | 4000 m |
| Permissible humidity (operation) | 5 % ... 95 % |
| Permissible humidity (storage/transport) | 5 % ... 95 % |
CE
| Certificate | CE-compliant |
ATEX
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | BVS 21 ATEX E 064 X |
UKCA Ex (UKEX)
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | PxCIF21UKEX2905634X |
IECEx
| Identification | Ex ec IIC T4 Gc |
| Certificate | IECEx BVS 21.0071X |
CCC / China-Ex
| Identification | Ex ec IIC T4 Gc |
| Certificate | 2022122308115724 |
UL, USA/Canada
| Identification | UL 508 Listed |
| Identification | Class I, Div. 2, Groups A, B, C, D T5 |
| Identification | Class I, Zone 2, Group IIC T5 |
EAC Ex
| Identification | 2Ex ec IIC T4 Gc |
| Certificate | BY/112 02.01 TP012 103.01 00081 |
EMC data
| Noise immunity | EN 61000-6-2 |
| Note | When being exposed to interference, there may be minimal deviations. |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
GB Standard
| Standards/regulations | GB/T 3836.1 |
| Standards/regulations | GB/T 3836.3 |
Mounting
| Mounting Type | Plug-on assembly |
| Mounting Position | any |
Accessories
MINI MCR-2-PTB - Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the supply voltages in combination with the fault monitoring module. Screw connection technology
MINI MCR-2-TB - Feed-through terminal block with plug-in connection technology for the transmission of signals already electrically isolated. Screw connection technology
MINI MCR-2-FM-RC - Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology, standard configuration
MINI MCR-2-FM-RC-PT - Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology, standard configuration
MINI MCR-2-UI-FRO-PT - Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
MINI MCR-2-UI-FRO - Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.
MINI MCR-2-POT-UI-PT - Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. push-in connection technology, standard configuration
MINI MCR-2-POT-UI - Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω ... 100 Ω to 0 kΩ ... 100 kΩ. Configurable via DIP switch or software. Screw connection technology, standard configuration
MINI MCR-2-NAM-2RO-PT - Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors, floating switch contacts, and switch contacts with resistance circuit. 2 transistor outputs. Configurable via DIP switch. Push-in connection technology.
MINI MCR-2-NAM-2RO - Configurable NAMUR signal conditioner with plug-in connection technology for proximity sensors, floating switch contacts, and switch contacts with resistance circuit. 2 transistor outputs, configurable via DIP switch. Screw connection technology.
Universally configurable frequency transducer for converting frequency (Hz/rpm) and PWM signals into standard signals. Sensor voltages greater than 8.2 V DC are possible in combination with MINI MCR-2-SPS 1033202. Screw connection technology.
Universally configurable frequency transducer for converting frequency (Hz/rpm) and PWM signals into standard signals. Sensor voltages greater than 8.2 V DC are possible in combination with MINI MCR-2-SPS-PT 1033201. Push-in connection technology.
ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rail in accordance with EN 60715
ME 6,2 TBUS-2 1,5/5-ST-3,81 GN - DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, Number of individual labels: 10, text field height: 5 mm, text field width: 15 mm
Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, Number of individual labels: 189, text field height: 5 mm, text field width: 15 mm
Why Proax for Phoenix Contact 2905635?
Proax is an authorized distributor of Phoenix Contact 2905635 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
MINI MCR-2-V8-MOD-RTU - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/RTU network via a communication adapter.
MINI MCR-2-V8-PB-DP - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a PROFIBUS DP network via a communication adapter.- MINI MCR-2-UI-FRO-PT - Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
- MINI MCR-2-UI-FRO - Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.
- MINI MCR-2-TB - Feed-through terminal block with plug-in connection technology for the transmission of signals already electrically isolated. Screw connection technology
