Official DistributorSKU
MPN
MINI MCR-2-UI-FRO
Weight
0.125 kg
This product is Not Cancellable/Not Returnable
Series MINI-MCR
MINI MCR-2-UI-FRO - Frequency measuring transducer
Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| Product family | MINI Analog Pro |
| No. of channels | 1 |
| Type | Signal conditioner |
| Configuration | DIP switches |
| Configuration | Software |
| Configuration | App |
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Functionality
| Configuration | DIP switches |
| Configuration | Software |
| Configuration | App |
Electrical properties
| Electrical isolation between input and output | yes |
| Step response (0–99%) | 120 ms (15 Hz sample rate) |
| Step response (0–99%) | 35 ms (60 Hz sample rate) |
| Step response (0–99%) | 15 ms (240 Hz sample rate, can only be set via software) |
| Step response (0–99%) | 130 ms (15 Hz sample rate) |
| Step response (0–99%) | 40 ms (60 Hz sample rate) |
| Step response (0–99%) | 20 ms (240 Hz sample rate, can only be set via software) |
| Maximum temperature coefficient | < 0.01 %/K |
| Temperature coefficient, typical | 0.01 %/K |
Electrical isolation Input/output/power supply
| Rated Insulation Voltage | 300 Vrms |
| Test voltage | 3 kV AC (50 Hz, 60 s) |
| Insulation | Reinforced insulation according to IEC/EN 61010-1 |
Supply
| Nominal Supply Voltage | 24 V DC |
| Supply Voltage Range | 9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715) |
| Typical current consumption | 27 mA (12 V DC) |
| Typical current consumption | 13.5 mA (24 V DC) |
| Power consumption | ≤ 350 mW (9.6 V DC) |
Signal: Voltage/current
| Number of Inputs | 1 |
| Configurable/programmable | Yes |
| Voltage input signal | 0 V ... 10 V (via DIP switch) |
| Voltage input signal | 2 V ... 10 V (via DIP switch) |
| Voltage input signal | 0 V ... 5 V (via DIP switch) |
| Voltage input signal | 1 V ... 5 V (via DIP switch) |
| Voltage input signal | 10 V ... 0 V (via DIP switch) |
| Voltage input signal | 10 V ... 2 V (via DIP switch) |
| Voltage input signal | 5 V ... 0 V (via DIP switch) |
| Voltage input signal | 5 V ... 1 V (via DIP switch) |
| Voltage input signal | 0 V ... 12 V (can be set via software) |
| Max. voltage input signal | 12 V |
| Current Input Signal | 0 mA ... 20 mA (via DIP switch) |
| Current Input Signal | 4 mA ... 20 mA (via DIP switch) |
| Current Input Signal | 0 mA ... 10 mA (via DIP switch) |
| Current Input Signal | 2 mA ... 10 mA (via DIP switch) |
| Current Input Signal | 20 mA ... 0 mA (via DIP switch) |
| Current Input Signal | 20 mA ... 4 mA (via DIP switch) |
| Current Input Signal | 10 mA ... 0 mA (via DIP switch) |
| Current Input Signal | 10 mA ... 2 mA (via DIP switch) |
| Current Input Signal | 0 mA ... 24 mA (can be set via software) |
| Max. current input signal | 24 mA |
| Input resistance of voltage input | > 120 kΩ |
| Input resistance current input | ~ 50 Ω (+0.7 V for test diode) |
Frequency: Frequency/transistor
| Frequency output | 0 Hz ... 10 kHz (via DIP switch) |
| Frequency output | 0 Hz ... 5 kHz (via DIP switch) |
| Frequency output | 0 Hz ... 2.5 kHz (via DIP switch) |
| Frequency output | 0 Hz ... 1 kHz (via DIP switch) |
| Frequency output | 0 Hz ... 500 Hz (via DIP switch) |
| Frequency output | 0 Hz ... 250 Hz (via DIP switch) |
| Frequency output | 0 Hz ... 100 Hz (via DIP switch) |
| Frequency output | 0 Hz ... 50 Hz (via DIP switch) |
| Frequency output | 0 Hz ... 10.5 kHz (can be set via software) |
| Load min. | 4 mA ≤ (UL / RL) ≤ 100 mA |
| Maximum transmission error | ≤ 0.1 % (> 7 kHz ≤ 0.2 %) |
| Output signal PWM | 15.6 kHz (10 bits, via DIP switch) |
| Output signal PWM | 1.9 kHz (10 bits, via DIP switch) |
| Output signal PWM | 3.9 kHz (12 bits, via DIP switch) |
| Output signal PWM | 488 Hz (12 bits, via DIP switch) |
| Output signal PWM | 977 Hz (14 bits, via DIP switch) |
| Output signal PWM | 122 Hz (14 bits, via DIP switch) |
| Output signal PWM | 244 Hz (16 bits, via DIP switch) |
| Output signal PWM | 31 Hz (16 bits, via DIP switch) |
| Output signal PWM | 31 Hz ... 15.6 kHz (can be set via software) |
| Load min. | 12 mA ≤ (UL / RL) ≤ 100 mA |
| Maximum transmission error | < 0.2 % (PWM frequency 500 Hz) |
| Maximum transmission error | < 0.5 % (500 Hz < PWM frequency 2000 Hz) |
| Maximum transmission error | < 1 % (2000 Hz < PWM frequency 4000 Hz) |
| Maximum transmission error | < 2 % (4000 Hz < PWM frequency 8000 Hz) |
| Maximum transmission error | < 3 % (8000 Hz < PWM frequency 16000 Hz) |
| Load current maximum | 100 mA |
| Maximum Switching Voltage | 30 V DC |
| Overrange/underrange | can be set (via software) |
Switching: Transistor
| Number of Outputs | 1 |
| Contact switching type | 1 N/O contact |
| Minimum Switching Voltage | 1 V DC |
| Maximum Switching Voltage | 30 V DC |
| Min. switching current | 100 µA |
| Max. switching current | 100 mA (30 V DC) |
Signal
| Number of Outputs | 1 |
Connection data
| Connection Method | Screw connection |
| Stripping length | 10 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² (with ferrule) |
| Conductor cross section rigid | 0.14 mm² ... 2.5 mm² (without ferrule) |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 (flexible) |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
Ex data
| Ex installation (EPL) | Gc |
| Ex installation (EPL) | Div. 2 |
Data: IFS interface
| Connection Method | Micro USB type B |
Signaling
| Error indication | Red LED |
Dimensions
| Width | 6.2 mm |
| Height | 109.81 mm |
| Depth | 119.2 mm |
Material specifications
| Color | gray (RAL 7042) |
| Housing Material | PBT |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 - HL 2 |
Ambient conditions
| Degree of Protection | IP20 (not assessed by UL) |
| Ambient Temperature (Operation) | -40 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | ≤ 2000 m |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
CE
| Certificate | CE-compliant |
ATEX
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | BVS 19 ATEX E 083 X |
UKCA Ex (UKEX)
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | PxCIF21UKEX2905026X |
IECEx
| Identification | Ex ec IIC T4 Gc |
| Certificate | IECEx BVS 19.0072X |
CCC / China-Ex
| Identification | Ex nA IIC T4 Gc |
| Certificate | NEPSI GYJ20.1318X |
UL, USA/Canada
| Identification | UL 508 Listed |
| Identification | Class I, Div. 2, Groups A, B, C, D T6 |
| Identification | Class I, Zone 2, Group IIC T6 |
Shipbuilding approval
| Certificate | DNV GL TAA000021E Rev. 1 |
EAC Ex
| Identification | 2Ex ec IIC T4 Gc |
| Certificate | BY/112 02.01 TP012 103.01 00081 |
DNV GL data
| Temperature | B |
| Humidity | B |
| Vibration | A |
| EMC | A |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board |
EMC data
| Noise immunity | EN 61000-6-2 |
| Note | When being exposed to interference, there may be minimal deviations. |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail. |
| Mounting Position | any |
Accessories
2695439 - DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rail in accordance with EN 60715
2866653 - Please use the following item in new systems: 2904614Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A, for potentially explosive areas
2866983 - Please use the following item in new systems: 2904614Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A
2869728 - DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
2902066 - Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the supply voltages in combination with the fault monitoring module. Screw connection technology
2902067 - Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the supply voltages in combination with the fault monitoring module. Push-in connection technology
2904504 - Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology, standard configuration
2904508 - Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology, standard configuration
2901993 - Eight MINI Analog Pro signal conditioners and measuring transducers can be connected to a controller with minimal cabling effort and without any errors using system adapters and system cabling.
2905634 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/RTU network via a communication adapter.
2905635 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/TCP network via a communication adapter.
2905636 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a PROFIBUS DP network via a communication adapter.
2811271 - Programming adapter with USB interface, for programming with software. The USB driver is included in the software solutions for the products to be programmed, such as measuring transducers or motor managers.
2905872 - Bluetooth adapter with micro USB and S-PORT interface for wireless communication with the MINI Analog, MINI Analog Pro, MACX Analog, Interface System Gateways, and PLC logic device series.
2909681 - Near Field Communication (NFC) programming adapter with USB interface for the wireless configuration of NFC-capable products from Phoenix Contact with software. A separate USB driver is not required.
Why Proax for Phoenix Contact 2902031?
Proax is an authorized distributor of Phoenix Contact 2902031 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2902032 - Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
2902061 - Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. Input configurable via DIP switch. Screw connection technology, standard configuration.
2902063 - Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. Input configurable via DIP switch. Push-in connection technology, standard configuration.
2902033 - Universally configurable threshold value switch with changeover contact relay output and plug-in connection technology for switching analog limit values. Configurable via DIP switch or software. Screw connection technology, standard configuration.
2902035 - Universally configurable threshold value switch with changeover contact relay output and plug-in connection technology for switching analog limit values. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
2902037 - 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. Screw connection technology, standard configuration.
2902040 - 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover, for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. push-in connection technology, standard configuration.
2905026 - Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.- 2905025 - Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Screw connection technology, order configuration.
2905028 - Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
2902026 - Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.
2902028 - Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
2902055 - Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Screw connection technology, standard configuration
2905249 - Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Push-in connection technology, standard configuration
2902068 - Feed-through terminal block with plug-in connection technology for the transmission of signals already electrically isolated. Screw connection technology- 2901993 - Eight MINI Analog Pro signal conditioners and measuring transducers can be connected to a controller with minimal cabling effort and without any errors using system adapters and system cabling.
- 2905635 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/TCP network via a communication adapter.
- 2905634 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/RTU network via a communication adapter.
- 2905636 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a PROFIBUS DP network via a communication adapter.
1033202 - Constant voltage source with pluggable connection technology for the generation of a highly precise constant voltage of 15 V and for the supply of sensors without internal power supply. Screw connection technology.