Official DistributorSKU
MPN
2902061
Weight
0.124 kg
Series MINI-MCR
MINI MCR-2-UI-I-OLP - Loop-powered isolators
Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. Input configurable via DIP switch. Screw connection technology, standard configuration.
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| Product family | MINI Analog Pro |
| No. of channels | 1 |
| Type | Signal conditioner |
| Configuration | DIP switches |
Insulation characteristics: GB Standard
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Electrical isolation | 2-way isolation |
| Electrical isolation between input and output | yes |
| Limit frequency (3 dB) | approx. 30 Hz |
| Step response (10-90%) | 20 ms |
| Maximum temperature coefficient | 0.01 %/K |
| Temperature coefficient, typical | 0.005 %/K |
| Maximum transmission error | ≤ 0.1 % (of final value) |
Electrical isolation Input/output/power supply
| Rated Insulation Voltage | 300 Vrms |
| Test voltage | 3 kV AC (50 Hz, 60 s) |
| Insulation | Reinforced insulation according to IEC/EN 61010-1 |
Supply
| Supply Voltage Range | 8 V DC ... 30 V DC (loop-powered, no external supply necessary) |
| Typical current consumption | ≤ 20 mA |
| Power consumption | ≤ 600 mW |
Signal: Voltage/current
| Number of Inputs | 1 |
| Configurable/programmable | Yes |
| Voltage input signal | 0 mV ... 1000 mV |
| Voltage input signal | 0 mV ... 750 mV |
| Voltage input signal | 0 mV ... 500 mV |
| Voltage input signal | 0 mV ... 300 mV |
| Voltage input signal | 0 mV ... 250 mV |
| Voltage input signal | 0 mV ... 200 mV |
| Voltage input signal | 0 mV ... 125 mV |
| Voltage input signal | 0 mV ... 120 mV |
| Voltage input signal | 0 mV ... 150 mV |
| Voltage input signal | 0 mV ... 100 mV |
| Voltage input signal | 0 mV ... 75 mV |
| Voltage input signal | 0 mV ... 60 mV |
| Voltage input signal | 0 mV ... 50 mV |
| Voltage input signal | 0 V ... 10 V |
| Voltage input signal | 0 V ... 7.5 V |
| Voltage input signal | 0 V ... 5 V |
| Voltage input signal | 0 V ... 3 V |
| Voltage input signal | 0 V ... 2.5 V |
| Voltage input signal | 0 V ... 2 V |
| Voltage input signal | 0 V ... 1.5 V |
| Voltage input signal | 0 V ... 1.25 V |
| Voltage input signal | 0 V ... 1.2 V |
| Voltage input signal | 0 V ... 30 V |
| Voltage input signal | 0 V ... 25 V |
| Voltage input signal | 0 V ... 20 V |
| Voltage input signal | 0 V ... 12.5 V |
| Voltage input signal | 0 V ... 12 V |
| Voltage input signal | 0 V ... 15 V |
| Voltage input signal | -1000 mV ... 1000 mV |
| Voltage input signal | -750 mV ... 750 mV |
| Voltage input signal | -500 mV ... 500 mV |
| Voltage input signal | -300 mV ... 300 mV |
| Voltage input signal | -250 mV ... 250 mV |
| Voltage input signal | -200 mV ... 200 mV |
| Voltage input signal | -125 mV ... 125 mV |
| Voltage input signal | -120 mV ... 120 mV |
| Voltage input signal | -150 mV ... 150 mV |
| Voltage input signal | -100 mV ... 100 mV |
| Voltage input signal | -75 mV ... 75 mV |
| Voltage input signal | -60 mV ... 60 mV |
| Voltage input signal | -50 mV ... 50 mV |
| Voltage input signal | -10 V ... 10 V |
| Voltage input signal | -7.5 V ... 7.5 V |
| Voltage input signal | -5 V ... 5 V |
| Voltage input signal | -3 V ... 3 V |
| Voltage input signal | -2.5 V ... 2.5 V |
| Voltage input signal | -2 V ... 2 V |
| Voltage input signal | -1.25 V ... 1.25 V |
| Voltage input signal | -1.2 V ... 1.2 V |
| Voltage input signal | -1.5 V ... 1.5 V |
| Voltage input signal | -30 V ... 30 V |
| Voltage input signal | -25 V ... 25 V |
| Voltage input signal | -20 V ... 20 V |
| Voltage input signal | -12.5 V ... 12.5 V |
| Voltage input signal | -12 V ... 12 V |
| Voltage input signal | -15 V ... 15 V |
| Voltage input signal | 2 V ... 10 V (additional areas can be configured, see table) |
| Voltage input signal | 1 V ... 5 V (additional areas can be configured, see table) |
| Max. voltage input signal | < 30 V |
| Current Input Signal | 0 mA ... 40 mA |
| Current Input Signal | 0 mA ... 30 mA |
| Current Input Signal | 0 mA ... 20 mA |
| Current Input Signal | 0 mA ... 12 mA |
| Current Input Signal | 0 mA ... 10 mA |
| Current Input Signal | 0 mA ... 8 mA |
| Current Input Signal | 0 mA ... 7.5 mA |
| Current Input Signal | 0 mA ... 6 mA |
| Current Input Signal | 0 mA ... 5 mA |
| Current Input Signal | 0 mA ... 4 mA |
| Current Input Signal | 0 mA ... 3 mA |
| Current Input Signal | 0 mA ... 2.5 mA |
| Current Input Signal | 0 mA ... 2 mA |
| Current Input Signal | 4 mA ... 20 mA |
| Current Input Signal | 2 mA ... 10 mA |
| Current Input Signal | 1 mA ... 5 mA |
| Max. current input signal | 50 mA (Dielectric strength up to 30 V) |
| Input resistance of voltage input | 100 kΩ (≤ 1 V) |
| Input resistance of voltage input | 1 MΩ (≥ 1 V) |
| Input resistance current input | 25 Ω (+0.7 V for test diode) |
Signal: Current
| Number of Outputs | 1 |
| Current Output Signal | 4 mA ... 20 mA |
| Max. current output signal | 32 mA |
| Load/Output Load Current Output | < 1000 Ω ((UB - 8 V) / 22 mA) |
| Ripple | < 10 mVrms (at 600 Ω) |
Connection data
| Connection Method | Screw connection |
| Stripping length | 10 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² (with ferrule) |
| Conductor cross section rigid | 0.14 mm² ... 2.5 mm² (without ferrule) |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 (flexible) |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
Ex data
| Ex installation (EPL) | Gc |
| Ex installation (EPL) | Div. 2 |
Signaling
| Status display | Green LED (supply voltage) |
Dimensions
| Width | 6.2 mm |
| Height | 109.81 mm |
| Depth | 119.2 mm |
Material specifications
| Color | gray (RAL 7042) |
| Housing Material | PBT |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 - HL 2 |
Ambient conditions
| Degree of Protection | IP20 (not assessed by UL) |
| Ambient Temperature (Operation) | -40 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | ≤ 2000 m |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
CE
| Certificate | CE-compliant |
ATEX
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | BVS 19 ATEX E 079 X |
UKCA Ex (UKEX)
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | PxCIF21UKEX2901994X |
IECEx
| Identification | Ex ec IIC T4 Gc |
| Certificate | IECEx BVS 19.0068X |
CCC / China-Ex
| Identification | Ex nA IIC T4 Gc |
UL, USA/Canada
| Identification | UL 508 Listed |
| Identification | Class I, Div. 2, Groups A, B, C, D T5 |
| Identification | Class I, Zone 2, Group IIC T5 |
Shipbuilding approval
| Certificate | DNV GL TAA000021E Rev. 1 |
EAC Ex
| Identification | 2Ex ec IIC T4 Gc |
| Certificate | BY/112 02.01 TP012 103.01 00081 |
DNV GL data
| Temperature | B |
| Humidity | B |
| Vibration | A |
| EMC | A |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board |
EMC data
| Noise immunity | EN 61000-6-2 |
| Note | When being exposed to interference, there may be minimal deviations. |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
Standards and Regulations
| Electrical isolation | 2-way isolation |
GB Standard
| Standards/regulations | GB 3836.1 |
| Standards/regulations | GB 3836.8 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Accessories
Why Proax for Phoenix Contact MINI MCR-2-UI-I-OLP?
Proax is an authorized distributor of Phoenix Contact MINI MCR-2-UI-I-OLP and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | MINIMCR2UIIOLP |
| Pack Size | 1 |
Recommended
2902063 - Output loop-powered 2-way isolator with plug-in connection technology for the electrical isolation of unipolar and bipolar analog signals. Input configurable via DIP switch. Push-in connection technology, standard configuration.
2902031 - Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.
2902032 - Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
2902033 - Universally configurable threshold value switch with changeover contact relay output and plug-in connection technology for switching analog limit values. Configurable via DIP switch or software. Screw connection technology, standard configuration.
2902035 - Universally configurable threshold value switch with changeover contact relay output and plug-in connection technology for switching analog limit values. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
2902037 - 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. Screw connection technology, standard configuration.
2902040 - 3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover, for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. push-in connection technology, standard configuration.
2902055 - Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Screw connection technology, standard configuration
2905249 - Configurable temperature transducer with plug-in connection technology for connecting thermocouples. Configurable via DIP switch or software. Push-in connection technology, standard configuration
2902026 - Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.
2902028 - Universally configurable 4-way signal conditioner, with switching output and plug-in connection technology for the electrical isolation of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
2905026 - Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.- 2905025 - Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Screw connection technology, order configuration.
2905028 - Universally configurable 4-way signal duplicator, with plug-in connection technology for the electrical isolation and duplication of analog signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
2902068 - Feed-through terminal block with plug-in connection technology for the transmission of signals already electrically isolated. Screw connection technology
2901993 - Eight MINI Analog Pro signal conditioners and measuring transducers can be connected to a controller with minimal cabling effort and without any errors using system adapters and system cabling.
2905635 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/TCP network via a communication adapter.
2905634 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/RTU network via a communication adapter.
2905636 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a PROFIBUS DP network via a communication adapter.
1033202 - Constant voltage source with pluggable connection technology for the generation of a highly precise constant voltage of 15 V and for the supply of sensors without internal power supply. Screw connection technology.