Official DistributorSKU
MPN
MINI MCR-2-UI-FRO-PT
Weight
0.12 kg
This product is Not Cancellable/Not Returnable
Series MINI-MCR
MINI MCR-2-UI-FRO-PT - Frequency measuring transducer
Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Push-in connection technology, standard configuration.
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| Product family | MINI Analog Pro |
| No. of channels | 1 |
| Type | Signal conditioner |
| Configuration | DIP switches |
| Configuration | Software |
| Configuration | App |
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Functionality
| Configuration | DIP switches |
| Configuration | Software |
| Configuration | App |
Electrical properties
| Electrical isolation between input and output | yes |
| Step response (0–99%) | 120 ms (15 Hz sample rate) |
| Step response (0–99%) | 35 ms (60 Hz sample rate) |
| Step response (0–99%) | 15 ms (240 Hz sample rate, can only be set via software) |
| Step response (0–99%) | 130 ms (15 Hz sample rate) |
| Step response (0–99%) | 40 ms (60 Hz sample rate) |
| Step response (0–99%) | 20 ms (240 Hz sample rate, can only be set via software) |
| Maximum temperature coefficient | < 0.01 %/K |
| Temperature coefficient, typical | 0.01 %/K |
Electrical isolation Input/output/power supply
| Rated Insulation Voltage | 300 Vrms |
| Test voltage | 3 kV AC (50 Hz, 60 s) |
| Insulation | Reinforced insulation according to IEC/EN 61010-1 |
Supply
| Nominal Supply Voltage | 24 V DC |
| Supply Voltage Range | 9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715) |
| Typical current consumption | 27 mA (12 V DC) |
| Typical current consumption | 13.5 mA (24 V DC) |
| Power consumption | ≤ 350 mW (9.6 V DC) |
Signal: Voltage/current
| Number of Inputs | 1 |
| Configurable/programmable | Yes |
| Voltage input signal | 0 V ... 10 V (via DIP switch) |
| Voltage input signal | 2 V ... 10 V (via DIP switch) |
| Voltage input signal | 0 V ... 5 V (via DIP switch) |
| Voltage input signal | 1 V ... 5 V (via DIP switch) |
| Voltage input signal | 10 V ... 0 V (via DIP switch) |
| Voltage input signal | 10 V ... 2 V (via DIP switch) |
| Voltage input signal | 5 V ... 0 V (via DIP switch) |
| Voltage input signal | 5 V ... 1 V (via DIP switch) |
| Voltage input signal | 0 V ... 12 V (can be set via software) |
| Max. voltage input signal | 12 V |
| Current Input Signal | 0 mA ... 20 mA (via DIP switch) |
| Current Input Signal | 4 mA ... 20 mA (via DIP switch) |
| Current Input Signal | 0 mA ... 10 mA (via DIP switch) |
| Current Input Signal | 2 mA ... 10 mA (via DIP switch) |
| Current Input Signal | 20 mA ... 0 mA (via DIP switch) |
| Current Input Signal | 20 mA ... 4 mA (via DIP switch) |
| Current Input Signal | 10 mA ... 0 mA (via DIP switch) |
| Current Input Signal | 10 mA ... 2 mA (via DIP switch) |
| Current Input Signal | 0 mA ... 24 mA (can be set via software) |
| Max. current input signal | 24 mA |
| Input resistance of voltage input | > 120 kΩ |
| Input resistance current input | approx. 50 Ω (+0.7 V for test diode) |
Frequency: Frequency/transistor
| Frequency output | 0 Hz ... 10 kHz (via DIP switch) |
| Frequency output | 0 Hz ... 5 kHz (via DIP switch) |
| Frequency output | 0 Hz ... 2.5 kHz (via DIP switch) |
| Frequency output | 0 Hz ... 1 kHz (via DIP switch) |
| Frequency output | 0 Hz ... 500 Hz (via DIP switch) |
| Frequency output | 0 Hz ... 250 Hz (via DIP switch) |
| Frequency output | 0 Hz ... 100 Hz (via DIP switch) |
| Frequency output | 0 Hz ... 50 Hz (via DIP switch) |
| Frequency output | 0 Hz ... 10.5 kHz (can be set via software) |
| Load min. | 4 mA ≤ (UL / RL) ≤ 100 mA |
| Maximum transmission error | ≤ 0.1 % (> 7 kHz ≤ 0.2 %) |
| Output signal PWM | 15.6 kHz (10 bits, via DIP switch) |
| Output signal PWM | 1.9 kHz (10 bits, via DIP switch) |
| Output signal PWM | 3.9 kHz (12 bits, via DIP switch) |
| Output signal PWM | 488 Hz (12 bits, via DIP switch) |
| Output signal PWM | 977 Hz (14 bits, via DIP switch) |
| Output signal PWM | 122 Hz (14 bits, via DIP switch) |
| Output signal PWM | 244 Hz (16 bits, via DIP switch) |
| Output signal PWM | 31 Hz (16 bits, via DIP switch) |
| Output signal PWM | 31 Hz ... 15.6 kHz (can be set via software) |
| Load min. | 12 mA ≤ (UL / RL) ≤ 100 mA |
| Maximum transmission error | < 0.2 % (PWM frequency 500 Hz) |
| Maximum transmission error | < 0.5 % (500 Hz < PWM frequency 2000 Hz) |
| Maximum transmission error | < 1 % (2000 Hz < PWM frequency 4000 Hz) |
| Maximum transmission error | < 2 % (4000 Hz < PWM frequency 8000 Hz) |
| Maximum transmission error | < 3 % (8000 Hz < PWM frequency 16000 Hz) |
| Load current maximum | 100 mA |
| Maximum Switching Voltage | 30 V DC |
| Overrange/underrange | can be set (via software) |
Switching: Transistor
| Number of Outputs | 1 |
| Contact switching type | 1 N/O contact |
| Minimum Switching Voltage | 1 V DC |
| Maximum Switching Voltage | 30 V DC |
| Min. switching current | 100 µA |
| Max. switching current | 100 mA (30 V DC) |
Signal
| Number of Outputs | 1 |
Connection data
| Connection Method | Push-in connection |
| Stripping length | 10 mm |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² (with ferrule) |
| Conductor cross section rigid | 0.14 mm² ... 2.5 mm² (without ferrule) |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 (flexible) |
Ex data
| Ex installation (EPL) | Gc |
| Ex installation (EPL) | Div. 2 |
Data: IFS interface
| Connection Method | Micro USB type B |
Signaling
| Error indication | Red LED |
Dimensions
| Width | 6.2 mm |
| Height | 109.81 mm |
| Depth | 119.2 mm |
Material specifications
| Color | gray (RAL 7042) |
| Housing Material | PBT |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 - HL 2 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 - HL 2 |
Ambient conditions
| Degree of Protection | IP20 (not assessed by UL) |
| Ambient Temperature (Operation) | -40 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | ≤ 2000 m |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
CE
| Certificate | CE-compliant |
ATEX
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | BVS 19 ATEX E 083 X |
UKCA Ex (UKEX)
| Identification | II 3 G Ex ec IIC T4 Gc |
| Certificate | PxCIF21UKEX2905026X |
IECEx
| Identification | Ex ec IIC T4 Gc |
| Certificate | IECEx BVS 19.0072X |
CCC / China-Ex
| Identification | Ex nA IIC T4 Gc |
| Certificate | NEPSI GYJ20.1318X |
UL, USA/Canada
| Identification | UL 508 Listed |
| Identification | Class I, Div. 2, Groups A, B, C, D T6 |
| Identification | Class I, Zone 2, Group IIC T6 |
Shipbuilding approval
| Certificate | DNV GL TAA000021E Rev. 1 |
EAC Ex
| Identification | 2Ex ec IIC T4 Gc |
| Certificate | BY/112 02.01 TP012 103.01 00081 |
DNV GL data
| Temperature | B |
| Humidity | B |
| Vibration | A |
| EMC | A |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board |
EMC data
| Noise immunity | EN 61000-6-2 |
| Note | When being exposed to interference, there may be minimal deviations. |
| Electromagnetic compatibility | Conformance with EMC directive |
| Noise emission | EN 61000-6-4 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | The DIN rail connector can be used for bridging the supply voltage. It can be snapped onto a 35 mm EN 60715 DIN rail. |
| Mounting Position | any |
Accessories
2695439 - DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rail in accordance with EN 60715
2866653 - Please use the following item in new systems: 2904614Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A, for potentially explosive areas
2869728 - DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
2902066 - Power terminal with plug-in connection technology for delivering the supply voltage to the DIN rail connector. Monitoring of the supply voltages in combination with the fault monitoring module. Screw connection technology
2904504 - Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Screw connection technology, standard configuration
2904508 - Fault monitoring module with plug-in connection technology for evaluating and reporting group errors from the FM system and for monitoring the supply voltages. Error message via N/C contact. Push-in connection technology, standard configuration
2905634 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/RTU network via a communication adapter.
2905635 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/TCP network via a communication adapter.
2905636 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a PROFIBUS DP network via a communication adapter.
Etiquette en plastique, Planche, jaune, vierge, repérable avec : BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, type de montage: collage, Nombre d'étiquettes: 10, hauteur du champ de texte: 5 mm, largeur du champ de texte: 15 mm
Etiquette en plastique, Carte, blanc, vierge, repérable avec : BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, type de montage: collage, Nombre d'étiquettes: 189, hauteur du champ de texte: 5 mm, largeur du champ de texte: 15 mm
Why Proax for Phoenix Contact 2902032?
Proax is an authorized distributor of Phoenix Contact 2902032 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2902031 - Analog frequency transducer with limit value functionality and plug-in connection technology for converting standard signals into frequency or PWM signals. Configurable via DIP switch or software. Screw connection technology, standard configuration.
2902068 - Feed-through terminal block with plug-in connection technology for the transmission of signals already electrically isolated. Screw connection technology- 2905634 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/RTU network via a communication adapter.
- 2905635 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a Modbus/TCP network via a communication adapter.
- 2905636 - Eight MINI Analog Pro signal conditioners and measuring transducers are quickly and easily integrated into a PROFIBUS DP network via a communication adapter.
1033202 - Constant voltage source with pluggable connection technology for the generation of a highly precise constant voltage of 15 V and for the supply of sensors without internal power supply. Screw connection technology.
