Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
AXL SE PSDO4/2 2A
Weight
0.058 kg

AXL SE PSDO4/2 2A - Safety module

Axioline Smart Elements, Digital output module, Functional safety, PROFIsafe, only for connection to Phoenix Contact or Siemens controller, Safe digital outputs: 2 (2-channel assignment), 4 (1-channel assignment), 24 V DC, 2 A, connection technology: 2-conductor, degree of protection: IP20

  • Up to SIL 3 in accordance with EN 61508
  • Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with EN IEC 62061
  • 4 safe outputs for 1-channel assignment
  • 2 safe outputs for 2-channel assignment
Technical Specifications

Dimensions

Width14.9 mm
Height62.2 mm
Depth62 mm

Smart Element interface

Number of interfaces1
Connection MethodCard edge connector
Transmission SpeedSee system in which you use the Smart Element.

Module

Input address area5 Byte (PROFIsafe 2.6.1)
Output address area6 Byte (PROFIsafe 2.6.1)

Digital:

Output nameSafe digital outputs
Output descriptionEN 61131-2
Connection MethodPush-in connection
Connection technology2-conductor
Number of Outputs2 (2-channel assignment)
Number of Outputs4 (1-channel assignment)
Protective circuitShort-circuit protection, overload protection of the outputs; electronic
Output Voltage24 V DC
Output Currentmax. 2 A (per output)
Maximum Output Current per channel2 A
Maximum Output Current per module4 A
Nominal Output Voltage24 V DC
Load min.1.5 kΩ (at nominal voltage)
Output voltage when switched off< 5 V
Output current when switched off< 2 mA
Nominal load, inductive48 VA (1 H; 12 Ω; at nominal voltage)
Nominal load, ohmic48 W (12 Ω, at nominal voltage)
Switching frequency1 Hz (0.2 Hz at > 1 A)
Reverse voltage resistance to short pulsesno
Behavior with overloadSwitch-off of the relevant output, restart upon acknowledgment
Behavior with inductive overloadOutput can be destroyed

Product properties

Product familyAxioline Smart Elements
ApplicationFunctional safety
ApplicationPROFIsafe
Applicationonly for connection to Phoenix Contact or Siemens controller
Typemodular
Mounting Positionany
Operating modePROFIsafe 2.4, PROFIsafe 2.6.1

Insulation characteristics

Overvoltage categoryII (IEC 60664-1)
Pollution degree2 (EN 60664-1)

Electrical properties

Transmission mediumCopper

Potentials

Protectionexternal fusing via the system in which the Smart Element is used
Protective circuitSurge protection of the supply voltage; electronic (35 V, 0.5 s)
Protective circuitPolarity reversal protection of the supply voltage; via the system in which the Smart Element is used

Potentials: Axioline F local bus supply (UBus)

Supply Voltage5 V DC (via bus base module)
Current drawmax. 120 mA (at UBus 5 V DC)
Current drawtyp. 93 mA (at UBus 5 V DC)

Potentials: Communications power supply of the Smart Elements (USE)

Supply Voltageusing card edge connectors

Potentials: I/O supply (UP)

Supply Voltage24 V DC (using card edge connectors)
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 30 mA ((Supply from UP with 30 V DC, all outputs set, without supply to the actuators))
Current drawtyp. 25 mA ((Supply from UP with 24 V DC, all outputs set, without supply to the actuators))
Current consumptionmin. 21 mA ((Supply from UP with 19.2 V DC, all outputs set, without supply to the actuators))
Power consumptionmax. 900 mW
Power consumptionmin. 403 mW

Connection technology

Connection nameI/O
Note on the connection methodNote the specification in the section Conductor cross sections, and stripping and insertion lengths.

Conductor connection

Connection MethodPush-in connection
Conductor cross section rigid0.25 mm² ... 1.5 mm²
Conductor cross section flexible0.25 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 1.5 mm²
Stripping length8 mm

I/O

Connection MethodPush-in connection
Note on the connection methodNote the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor cross section, rigid0.25 mm² ... 1.5 mm²
Conductor cross section, flexible0.25 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm²
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 60 °C
Degree of ProtectionIP20
Degree of protection at installation locationmin. IP54
Air pressure (operation)70 kPa ... 108 kPa
Air pressure (storage/transport)66 kPa ... 108 kPa
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

Standards and Regulations

Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

Air clearances and creepage distances

Air clearances and creepage distancesIEC 60664-1

Mounting

Mounting TypeSmart Element slot
Mounting Positionany
Accessories

Why Proax for Phoenix Contact 1079231?

Proax is an authorized distributor of Phoenix Contact 1079231 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Available for order

Phoenix Contact Availability