Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
This product is Not Cancellable/Not Returnable

AXL SE RTD4 PT100 - Temperature module

Axioline Smart Elements, Temperature recording module, Analog RTD inputs: 4 (Pt 100), connection technology: 3-conductor, degree of protection: IP20

  • 4 analog input channels for the connection of resistance temperature detectors (Pt 100)
  • Connection of sensors in 3-conductor technology
  • 2- and 4-conductor sensors can also be connected
  • Data format: standardized representation
  • Resolution: 16 bits
  • Wire-break detection
  • Substitute value behavior can be parameterized for each input
  • Device rating plate stored
Technical Specifications

Dimensions

Width14.9 mm
Height62.2 mm
Depth62 mm

Utilization restriction

EMC noteEMC: class A product, see manufacturer's declaration in the download area

Smart Element interface

Number of interfaces1
Connection MethodCard edge connector
Transmission SpeedSee system in which you use the Smart Element.
Start time until ready to operate< 1000 ms

Module

ID code (hex)none
Process data channel64 bit
Input address area8 Byte
Output address area8 Byte
Required parameter data 24 Byte
Required configuration data 6 Byte

Analog

Input nameAnalog RTD inputs
Description of the inputInputs for resistive temperature sensors
Number of Inputs4 (Pt 100)
Connection MethodPush-in connection
Connection technology3-conductor
Note regarding the connection technologyshielded, 2-, 3-, and 4-conductor sensors can be connected
A/D converter resolution16 bit
Sensor types (RTD) that can be usedPt 100 (IEC 60751/EN 60751)
Data formatsStandardized representation
Measured value representation16 bits (15 bits + sign bit)
Nominal value of the current sources1 mA (pulsed current, the data is valid during the sampling phase)
Process data updatetyp. 1 ms
Protective circuitOverload protection; max. ±40 V DC, 1 min.
Protective circuitTransient protection

Product properties

Product familyAxioline Smart Elements
Typemodular
Mounting PositionSee the system in which the Smart Element is used.

Insulation characteristics

Overvoltage categoryII (IEC 60664-1)
Pollution degree2 (EN 60664-1)

Electrical properties

Maximum power dissipation for nominal condition0.4 W

Potentials: Communications power supply of the Smart Elements (USE)

Supply Voltageusing card edge connectors

Potentials: I/O supply (UP)

Supply Voltage24 V DC (using card edge connectors)
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 12 mA
Current drawtyp. 8 mA
Current consumptionmin. 5 mA (without connected peripherals)
Power consumptionmax. 290 mW
Power consumptionmin. 120 mW
Protective circuitSurge protection; See the system in which the Smart Element is used.
Protective circuitReverse polarity protection; Polarity protection diode

Electrical isolation/isolation of the voltage ranges

Test voltage: Communications supply / 24 V supply (I/O)500 V AC, 50 Hz, 1 min.
Test voltage: Communications supply / functional ground500 V AC, 50 Hz, 1 min.
Test voltage: 24 V supply (I/O) / functional ground500 V AC, 50 Hz, 1 min.

Connection technology

Connection nameI/O
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.

Conductor connection

Connection MethodPush-in connection
Conductor cross section rigid0.25 mm² ... 1.5 mm²
Conductor cross section flexible0.25 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 1.5 mm²
Stripping length8 mm

I/O

Connection MethodPush-in connection
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual.
Conductor cross section, rigid0.25 mm² ... 1.5 mm²
Conductor cross section, flexible0.25 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm²
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 60 °C
Degree of ProtectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

Standards and Regulations

Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

Mounting

Mounting TypeSmart Element slot
Mounting PositionSee the system in which the Smart Element is used.
Accessories

Why Proax for Phoenix Contact 1088106?

Proax is an authorized distributor of Phoenix Contact 1088106 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Available for order

Phoenix Contact Availability