Official Distributor
SKU
Weight
0.044 kg
This product is Not Cancellable/Not Returnable
AXL SE DOR2 W 230 - Relay Module
Axioline Smart Elements, Relay module, Relay outputs: 2 (floating), Changeover contact, 220 V DC, 230 V AC, degree of protection: IP20
- 2 mono-stable relays
- Floating connections for 2 actuators
- Switching current per channel: 6 A, maximum
- Device rating plate stored
Technical Specifications
Dimensions
Width | 14.9 mm |
Height | 62.2 mm |
Depth | 62 mm |
Smart Element interface
Number of interfaces | 1 |
Connection Method | Card edge connector |
Transmission Speed | See system in which you use the Smart Element. |
Start time until ready to operate | < 500 ms |
Module
ID code (hex) | none |
Process data channel | 8 bit |
Input address area | 0 Byte |
Output address area | 1 Byte |
Required parameter data | 9 Byte |
Required configuration data | 6 Byte |
Relay
Number of Outputs | 2 (floating) |
Connection Method | Push-in connection |
Connection technology | 2-conductor |
Contact switching type | Changeover contact |
Switching current | max. 6 A (up to 250 V AC, cos phi = 0.75 ... 0.8) |
Switching current | max. 6 A (up to 30 V DC, N/O contact, general use) |
Switching current | max. 3 A (up to 30 V DC, N/C contact, general use) |
Switching current | max. 580 mA (at 48 V DC) |
Switching current | max. 250 mA (at 110 V DC) |
Switching current | max. 125 mA (at 220 V DC) |
Switching current | max. 220 mA DC (125 V DC, L/R ≤ 50 ms) |
Switching current | max. 110 mA DC (250 V DC, L/R ≤ 50 ms) |
Switching capacity | max. 1500 VA (AC applications up to 55°C, observe derating above that) |
Switching capacity | max. 180 W (up to 30 V DC, N/O contact, general use) |
Switching capacity | max. 90 W (up to 30 V DC, N/C contact, general use) |
Switching capacity | max. 28 W (above 30 V DC) |
Switching capacity | For further DC values, see DC load limit curve. |
Switching capacity in accordance with IEC 60947-5-1 | 3 A (24 V (AC15)) |
Switching capacity in accordance with IEC 60947-5-1 | 3 A (120 V (AC15)) |
Switching capacity in accordance with IEC 60947-5-1 | 3 A (230 V (AC15)) |
Switching capacity in accordance with IEC 60947-5-1 | 2 A (24 V (DC13), L/R = 100 ms) |
Switching capacity in accordance with IEC 60947-5-1 | 0.2 A (110 V (DC13), L/R = 44 ms) |
Switching capacity in accordance with IEC 60947-5-1 | 0.1 A (220 V (DC13), L/R = 44 ms) |
Switching capacity in accordance with UL/CSA 61010-2-201 | 5 A (AC, B300, up to max. 55°C) |
Switching capacity in accordance with UL/CSA 61010-2-201 | 1 A (DC, R300, up to max. 60°C) |
Switching frequency | max. 6 (per minute) |
Mechanical service life | 20x 106 cycles |
Product properties
Product family | Axioline Smart Elements |
Type | modular |
Mounting Position | See the system in which the Smart Element is used. |
Insulation characteristics
Overvoltage category | III (EN 61010-2-201/IEC 61010-2-201) |
Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
Electrical properties
Maximum power dissipation for nominal condition | 2 W |
Potentials: Communications power supply of the Smart Elements (USE)
Supply Voltage | using card edge connectors |
Potentials: I/O supply (UP)
Supply Voltage | 24 V DC (using card edge connectors) |
Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Current draw | typ. 36 mA (18 mA per relay, all contacts floating) |
Protective circuit | Surge protection; See the system in which the Smart Element is used. |
Protective circuit | Reverse polarity protection; parallel diode |
Electrical isolation/isolation of the voltage ranges
Test voltage: Communications supply / 24 V supply (I/O) | 500 V AC, 50 Hz, 1 min. |
Test voltage: Communications supply / functional ground | 500 V AC, 50 Hz, 1 min. |
Test voltage: 24 V supply (I/O) / functional ground | 500 V AC, 50 Hz, 1 min. |
Test voltage: Supply logic / relay contact | 4 kV |
Test voltage: 24 V supply (devices) / relay contact | 4 kV |
Test voltage: Relay contact / functional ground | 4 kV |
Connection technology
Connection name | I/O |
Note on the connection method | Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual. |
Note on the connection method | When selecting the cables, observe the permissible operating temperature in accordance with IEC or UL. |
Conductor connection
Connection Method | Push-in connection |
Conductor cross section rigid | 0.25 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.25 mm² ... 1.5 mm² |
Conductor cross section AWG | 24 ... 16 |
Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² |
Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 0.75 mm² |
Stripping length | 8 mm |
I/O
Connection Method | Push-in connection |
Note on the connection method | Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual. |
Note on the connection method | When selecting the cables, observe the permissible operating temperature in accordance with IEC or UL. |
Conductor cross section, rigid | 0.25 mm² ... 1.5 mm² |
Conductor cross section, flexible | 0.25 mm² ... 1.5 mm² |
Conductor cross section AWG | 24 ... 16 |
Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 0.75 mm² |
Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² |
Stripping length | 8 mm |
Ambient conditions
Ambient Temperature (Operation) | -25 °C ... 60 °C |
Degree of Protection | IP20 |
Air pressure (operation) | 80 kPa ... 106 kPa |
Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Mounting
Mounting Type | Smart Element slot |
Mounting Position | See the system in which the Smart Element is used. |
Why Proax for Phoenix Contact 1105562?
Proax is an authorized distributor of Phoenix Contact 1105562 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended
- 1079231 - Axioline Smart Elements, Digital output module, Functional safety, PROFIsafe, only for connection to Phoenix Contact or Siemens controller, Safe digital outputs: 2 (2-channel assignment), 4 (1-channel assignment), 24 V DC, 2 A, connection technology: 2-conductor, degree of protection: IP20