Official DistributorSKU
MPN
MACX MCR-S-MUX-TB
MACX MCR-S-MUX-TB - HART transfer board
The HART termination board is used to apply the signals from the HART-compatible signal converters or field devices and transmit them to the MACX MCR-S-MUX HART multiplexer.
Technical Specifications
Product properties
| Product family | MACX Analog |
| No. of channels | 16 |
Electrical properties
| Reverse polarity protection | yes |
Supply
| Nominal Supply Voltage | 24 V DC |
| Supply Voltage Range | 19 V ... 31.2 V |
Signal
| Description of the input | HART |
| Input Signal | Current |
| Current Input Signal | 4 mA ... 20 mA (HART) |
| Output description | HART |
| Current Output Signal | 4 mA ... 20 mA (HART) |
Supply
| Connection Method | Screw terminal blocks |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross-section rigid (2 conductors with same cross section) | 0.2 mm² ... 1 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.25 mm² ... 2.5 mm² (Ferrules without plastic sleeve) |
| Conductor cross section flexible | 0.25 mm² ... 1.5 mm² (Ferrule with plastic sleeve) |
| Conductor cross section flexible (2 conductors with same cross section) | 0.2 mm² ... 1.5 mm² |
| Conductor cross section flexible (2 conductors with same cross section) | 0.25 mm² ... 0.5 mm² (Ferrule without / with plastic sleeve) |
Signal level
| Connection Method | Screw terminal blocks |
| Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
| Conductor cross-section rigid (2 conductors with same cross section) | 0.08 mm² ... 0.5 mm² |
| Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.25 mm² ... 0.5 mm² (Ferrule without / with plastic sleeve) |
| Conductor cross section flexible | 0.25 mm² ... 1.5 mm² (Ferrule without / with plastic sleeve) |
| Conductor cross section flexible (2 conductors with same cross section) | 0.08 mm² ... 0.75 mm² |
| Conductor cross section flexible (2 conductors with same cross section) | 0.25 mm² ... 0.34 mm² (Ferrules without plastic sleeve) |
Ex data
| Ex installation (EPL) | Gc |
Dimensions
| Width | 80 mm |
| Height | 70 mm |
| Depth | 125 mm |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Housing Material | Polyamide (PA 6.6) |
Ambient conditions
| Degree of Protection | IP20 (Terminal blocks) |
| Degree of Protection | IP00 (Housing) |
| Ambient Temperature (Operation) | -20 °C ... 70 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m |
| Permissible humidity (operation) | ≤ 95 % (non-condensing) |
ATEX
| Identification | II 3 G Ex ec IIC T4 Gc |
IECEx
| Identification | Ex ec IIC T4 Gc |
Safety Integrity Level (SIL, IEC 61508)
| Identification | 3 |
EMC data
| Electromagnetic compatibility | Tested in accordance with the following standards and regulations: EN 61326-1 For industrial use, NAMUR NE 21 |
Mounting
| Mounting Type | DIN rail mounting/wall mounting |
| Mounting Position | vertical, horizontal |
Why Proax for Phoenix Contact 2308124?
Proax is an authorized distributor of Phoenix Contact 2308124 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
MACX MCR-S-MUX - HART Multiplexer for online configuration and diagnostics of HART-compatible field devices, as well as for continuous documentation of process variables and states with a PC or management system for mounting on NS 35/7.5 or NS 32
Limit value switch with input for active current and voltage signals and a limit-value relay output (changeover contact). Can be set via DIP switch and potentiometer, galvanic 3-way electrical isolation, up to SIL2 (SC3), PLc Cat.1, Push-in connection.
MACX MCR-SL-RTD-I-NC, Temperature transducer, converts signals from resistance thermometers and resistors into 0/4 - 20 mA signals. Freely programmable, 3-way electrical isolation.
MACX MCR-SL-RTD-I-SP-NC, Temperature transducer, converts signals from resistance thermometers and resistors into 0/4 - 20 mA signals. Freely programmable, 3-way electrical isolation.
MACX MCR-SL-TC-I-NC, Temperature transducer, converts signals from thermocouples and linear mV sources into 0/4-20 mA signals. Freely programmable, 3-way electrical isolation, custom-configured.
MACX MCR-SL-NAM-R - NAMUR signal conditioners for operating proximity sensors and switches. The signals are transmitted to the control level via relay output (changeover contact). Line fault detection (LFD), 3-way electrical isolation, SIL 2, with screw connection.
