Official DistributorSKU
MPN
AXL SE INC1 ASYM
Weight
0.038 kg
Series AXL-SE-INC1
AXL SE INC1 ASYM - Function module
Axioline Smart Elements, Position detection module, Incremental encoder input: 1, Asymmetrical encoder, Digital inputs: 2, 24 V DC, degree of protection: IP20
- Acquisition of digital signals from asymmetrical incremental encoders (A, B, Z)
- Acquisition of pulses of up to 300 kHz
- Evaluating linear or rotary axes
- Power supply for 5 V or 24 V encoder
- 1 input can be used for referencing
- Latch function for quick buffering of positions
- 32-bit register to output the measured increments
- Device rating plate stored
Technical Specifications
Dimensions
| Width | 14.9 mm |
| Height | 62.2 mm |
| Depth | 62 mm |
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Smart Element interface
| Number of interfaces | 1 |
| Connection Method | Card edge connector |
| Transmission Speed | See system in which you use the Smart Element. |
| Start time until ready to operate | < 500 ms |
Module
| ID code (hex) | none |
| Process data channel | 80 bit |
| Input address area | 10 Byte |
| Output address area | 10 Byte |
| Required parameter data | 19 Byte |
| Required configuration data | 7 Byte |
Digital:
| Input name | Digital inputs |
| Description of the input | EN 61131-2, type 3 |
| Number of Inputs | 2 (DI Ref, DI L) |
| Connection Method | Push-in connection |
| Connection technology | 1-conductor |
| Input voltage range "0" signal | -3 V DC ... 5 V DC |
| Input voltage range "1" signal | 11 V DC ... 30 V DC |
| Nominal input voltage UIN | 24 V DC |
| Nominal input current at UIN | 3 mA |
| Protective circuit | Transient protection; Suppressor diode |
Encoder
| Number of Inputs | 1 (A, B, Z) |
| Input name | Incremental encoder input |
| Encoder signals | Asymmetrical encoder |
| Cable Length | < 30 m (Shielded cable) |
Product properties
| Product family | Axioline Smart Elements |
| Type | modular |
| Mounting Position | See the system in which the Smart Element is used. |
Insulation characteristics
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
Electrical properties
| Maximum power dissipation for nominal condition | 1.8 W |
Encoder
| Number | 1 (+5 V) |
| Nominal Output Voltage | 5 V DC |
| Voltage range | 5 V DC ... 5.5 V DC |
| Current carrying capacity | max. 300 mA |
| Protective circuit | Short-circuit protection; Electrical and thermal |
| Protective circuit | Overload protection |
| Protective circuit | Transient protection; Suppressor diode |
| Number | 1 (+24 V) |
| Nominal Output Voltage | 24 V DC |
| Voltage range | 19.2 V DC ... 30 V DC |
| Current carrying capacity | max. 500 mA |
| Protective circuit | Short-circuit protection; Electrical (from approx. 600 mA) |
| Protective circuit | Overload protection |
| Protective circuit | Transient protection; Suppressor diode |
| Number | 1 (A, B, Z) |
| Designation | Asymmetrical incremental encoder |
| Input Frequency | max. 300 kHz |
Potentials: Communications power supply of the Smart Elements (USE)
| Supply Voltage | using card edge connectors |
Potentials: I/O supply (UP)
| Supply Voltage | 24 V DC (using card edge connectors) |
| Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 700 mA |
| Current draw | typ. 512 mA |
| Current consumption | min. 11 mA (without connected peripherals) |
| Power consumption | max. 21 W (of which 1.55 W internal losses) |
| Power consumption | min. 264 mW |
| Protective circuit | Surge protection; See the system in which the Smart Element is used. |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
Electrical isolation/isolation of the voltage ranges
| Test voltage: Communications supply / 24 V supply (I/O) | 500 V AC, 50 Hz, 1 min. |
| Test voltage: Communications supply / functional ground | 500 V AC, 50 Hz, 1 min. |
| Test voltage: 24 V supply (I/O) / functional ground | 500 V AC, 50 Hz, 1 min. |
Connection technology
| Connection name | I/O |
| Note on the connection method | Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual. |
Conductor connection
| Connection Method | Push-in connection |
| Conductor cross section rigid | 0.25 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.25 mm² ... 1.5 mm² |
| Conductor cross section AWG | 24 ... 16 |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Stripping length | 8 mm |
I/O
| Connection Method | Push-in connection |
| Note on the connection method | Please observe the information provided on conductor cross sections in the “Axioline Smart Elements” user manual. |
| Conductor cross section, rigid | 0.25 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.25 mm² ... 1.5 mm² |
| Conductor cross section AWG | 24 ... 16 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Stripping length | 8 mm |
Ambient conditions
| Ambient Temperature (Operation) | -25 °C ... 60 °C |
| Degree of Protection | IP20 |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Standards and Regulations
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting
| Mounting Type | Smart Element slot |
| Mounting Position | See the system in which the Smart Element is used. |
Why Proax for Phoenix Contact 1182185?
Proax is an authorized distributor of Phoenix Contact 1182185 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
1088130 - Axioline Smart Elements, Position detection module, Incremental encoder input: 1, symmetrical encoders, in accordance with EIA-422, Digital inputs: 2, 24 V DC, degree of protection: IP20
1088132 - Axioline Smart Elements, IO-Link master, IO-Link ports Class A: 4, connection method: Push-in connection, connection technology: 3-conductor, degree of protection: IP20
Axioline Smart Elements, Module à relais, Sorties à relais: 2 (indépendant du potentiel), Contact inverseur, 220 V DC, 230 V AC, indice de protection: IP20
1181790 - Axioline Smart Elements, Digital output module, Digital outputs: 4, 24 V DC, 2 A, connection technology: 2-conductor, degree of protection: IP20
1088129 - Axioline Smart Elements, Digital output module, Digital outputs: 16, 24 V DC, 500 mA, connection technology: 1-conductor, degree of protection: IP20
Axioline Smart Elements, Module de sortie numérique, Sorties TOR: 16 (NPN), 24 V DC, 500 mA, connectique: 1 fil, indice de protection: IP20
Axioline Smart Elements, Module fonction, Entrée de comptage: 1, Entrée de commande: 1, Entrée du sens de comptage: 1, Sortie TOR: 1, 24 V DC, 100 mA, indice de protection: IP20
1088127 - Axioline Smart Elements, Digital input module, Digital inputs: 16, 24 V DC, connection technology: 1-conductor, degree of protection: IP20
Axioline Smart Elements, Module d'entrée numérique, Entrées TOR: 16 (NPN), 24 V DC, connectique: 1 fil, indice de protection: IP20
1079241 - Axioline Smart Elements, Digital input module, Functional safety, PROFIsafe, only for connection to Phoenix Contact or Siemens controller, Safe digital inputs: 4 (2-channel assignment), 8 (1-channel assignment), 24 V DC, connection technology: 3-conductor, degree of protection: IP20
1079231 - Axioline Smart Elements, Digital output module, Functional safety, PROFIsafe, only for connection to Phoenix Contact or Siemens controller, Safe digital outputs: 2 (2-channel assignment), 4 (1-channel assignment), 24 V DC, 2 A, connection technology: 2-conductor, degree of protection: IP20
1088123 - Axioline Smart Elements, Analog output module, Analog outputs: 4, 4 mA ... 20 mA, connection technology: 2-conductor, degree of protection: IP20- Axioline Smart Elements, Module de sortie analogique, Sorties analogiques: 4, 0 mA ... 20 mA, connectique: 2 fils, indice de protection: IP20
1088126 - Axioline Smart Elements, Analog output module, Analog outputs: 4, 0 V ... 10 V, connection technology: 2-conductor, degree of protection: IP20
1088062 - Axioline Smart Elements, Analog input module, Analog inputs: 4, 4 mA ... 20 mA, connection technology: 2-conductor, degree of protection: IP20- Axioline Smart Elements, Module d'entrée analogique, Entrées analogiques: 4, 0 mA ... 20 mA, connectique: 2 fils, indice de protection: IP20
1088104 - Axioline Smart Elements, Analog input module, Analog inputs: 4, 0 V ... 10 V, connection technology: 2-conductor, degree of protection: IP20
Axioline Smart Elements, Module de détermination de la température, Entrées analogiques capteurs RTD: 4 (Pt 100), connectique: 3 fils, indice de protection: IP20
Axioline Smart Elements, Module de détermination de la température, Entrées analogiques capteurs RTD: 4 (Pt 1000), connectique: 3 fils, indice de protection: IP20
1088128 - Axioline Smart Elements, Communication module, interface RS-485: 1, Process data width: 20 bytes, Transparent protocol, degree of protection: IP20