Official DistributorSKU
MPN
PSR-SCP- 24DC/URD3/4X1/2X2/3
Weight
0.234 kg
This product is Not Cancellable/Not Returnable
Series PSR-SCP
PSR-SCP- 24DC/URD3/4X1/2X2/3 - Extension module
1-channel contact extension with TBUS interface, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, the contacts have an off-delay (0.3 … 3 s), Cat. 3, PL e in accordance with EN ISO 13849, plug-in terminal blocks with screw connection, width: 22.5 mm
- Up to Cat. 3/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with EN IEC 62061, SIL 3 in accordance with IEC 61508
Technical Specifications
Product properties
| Product family | PSRclassic |
| Application | Extension module |
| Mechanical service life | approx. 107 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
Electrical properties
| Maximum power dissipation for nominal condition | 2.02 W |
| Nominal operating mode | 100% operating factor |
Air clearances and creepage distances between the power circuits
| Rated Insulation Voltage | 250 V |
| Rated surge voltage/insulation | 4 kV / basic isolation (safe isolation, reinforced insulation and 6 kV between input circuit/N/C contacts and enabling current paths). |
General
| Nominal input voltage UN | 24 V DC |
| Input voltage range in reference to UN | 0.85 ... 1.1 |
| Typical input current at UN | 94 mA |
| Typical response time | 20 ms |
| Typical release time range | 0.3 s ... 3 s +50 % (adjustable) |
| Recovery time | 1 s |
| Protective circuit | Fuse; PTC resistor |
| Protective circuit | Surge protection; Suppressor diode |
| Operating voltage display | Green LED |
| Status display | Green LED |
Output data
| Contact switching type | 4 delayed enabling current paths |
| Contact switching type | 1 delayed signaling current path |
| Contact switching type | 1 delayed confirmation current path |
| Contact Material | AgSnO2 |
| Maximum Switching Voltage | 250 V AC/DC |
| Minimum Switching Voltage | 15 V AC/DC |
| Limiting Continuous Current | 6 A (N/O contact) |
| Limiting Continuous Current | 3 A (N/C contact) |
| Maximum Inrush Current | 6 A (N/O contact) |
| Maximum Inrush Current | 3 A (N/C contact) |
| Inrush current, minimum | 25 mA |
| Sq. Total current | 50 A2 (ITH2 = I12 + I22 + I32 + I42) |
| Interrupting rating (ohmic load) max. | 144 W (24 V DC, τ = 0 ms, N/C contact 65/66: 72 W) |
| Interrupting rating (ohmic load) max. | 288 W (48 V DC, τ = 0 ms, N/C contact 65/66: 144 W) |
| Interrupting rating (ohmic load) max. | 77 W (110 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 88 W (220 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 1500 VA (250 V AC, τ = 0 ms, N/C contact 65/66: 750 VA) |
| Maximum interrupting rating (inductive load) | 48 W (24 V DC, τ = 40 ms) |
| Maximum interrupting rating (inductive load) | 40 W (48 V DC, τ = 40 ms) |
| Maximum interrupting rating (inductive load) | 35 W (110 V DC, τ = 40 ms) |
| Maximum interrupting rating (inductive load) | 33 W (220 V DC, τ = 40 ms) |
| Switching capacity min. | 0.4 W |
| Switching capacity (360/h cycles) | 6 A (24 V DC) |
| Switching capacity (360/h cycles) | 5 A (230 V AC) |
| Switching capacity (3600/h cycles) | 3 A (24 V (DC13)) |
| Switching capacity (3600/h cycles) | 3 A (230 V (AC15)) |
| Output fuse | 10 A gL/gG NEOZED (N/O contact) |
| Output fuse | 4 A gL/gG NEOZED (N/C contact) |
Connection technology
| pluggable | yes |
Conductor connection
| Connection Method | Screw connection |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section AWG | 24 ... 12 |
| Stripping length | 7 mm |
| Screw thread | M3 |
Dimensions
| Width | 22.5 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
Material specifications
| Color (Housing) | yellow (RAL 1018) |
| Housing Material | Polyamide |
Safety data
| Stop category | 1 |
Safety data: EN ISO 13849
| Category | 3 (In conjunction with suitable evaluating device) |
| Performance level (PL) | e (In conjunction with suitable evaluating device) |
Safety data: IEC 61508 - High demand
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Safety data: IEC 61508 - Low demand
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Safety data: EN IEC 62061
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Ambient conditions
| Degree of Protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient Temperature (Operation) | -20 °C ... 55 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Maximum altitude | max. 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
Air clearances and creepage distances between the power circuits
| Standards/regulations | IEC 60664-1 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Accessories
Why Proax for Phoenix Contact 2981732?
Proax is an authorized distributor of Phoenix Contact 2981732 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
1442021 - 1-channel or 2-channel contact extension, 5 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4 PL e in accordance with EN ISO 13849 safe isolation, width: 35 mm, pluggable screw terminal block
2981936 - Interface module for the connection of several safety sensors or switches with NC/NO contacts to the safety relay PSR-SDC4, with screw connection
2986575 - Safe coupling relay for SIL 2 high- and low-demand applications, couples digital output signals to the periphery, two enabling current paths, one signal contact, module for safe state off applications, integrated test pulse filter, plug-in screw connection, width: 17.5 mm
2981978 - Safe coupling relay for SIL 3 high- and low-demand applications, couples digital output signals to the periphery, one enabling current path, one signal contact, module for safe state off applications, test pulse filter, fuse, plug-in screw connection, width: 17.5 mm
2986960 - Safe coupling relay for SIL 3 high- and low-demand applications, couples digital output signals to the periphery, two enabling current paths, one signal contact, module for safe state off applications, integrated test pulse filter, plug-in screw connection, width: 17.5 mm
PSR-SCP- 24DC/ESD/5X1/1X2/ T 1, Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with fixed 1.0 s dropout delay, plug-in screw connection terminal blocks- PSR-SCP- 24DC/ESD/5X1/1X2/ T 3, Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with fixed 3.0 s dropout delay, plug-in screw connection terminal blocks
