The figure shows a version of the product
Official DistributorSKU
MPN
PSR-SCP- 24DC/ESD/5X1/1X2/ T 3
Weight
0.418 kg
This product is Not Cancellable/Not Returnable
Series PSR-SCP
PSR-SCP- 24DC/ESD/5X1/1X2/ T 3 - Safety relays
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 3 s, plug-in screw connection terminal blocks
- Fixed delay times of 3 s
- 1- and 2-channel control
- 3 undelayed and 2 dropout delay contacts
- For emergency stop and safety door monitoring, plus evaluation of light grids
- Manually monitored and automatic activation
Technical Specifications
Product properties
| Application | Emergency stop |
| Application | Safety door |
| Application | Light grid |
| Mechanical service life | 10x 106 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
Electrical properties
| Maximum power dissipation for nominal condition | 3.6 W |
| Nominal operating mode | 100% operating factor |
Air clearances and creepage distances between the power circuits
| Rated Insulation Voltage | 250 V AC |
| Rated surge voltage/insulation | Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between 13/14, 23/24, 33/34, and the remaining current pathsbetween 13/14, 23/24, 33/34 among one another |
General
| Rated control circuit supply voltage US | 24 V DC -15 % / +10 % |
| Power consumption at US | typ. 3.6 W |
| Rated control supply current IS | typ. 150 mA |
| Inrush Current | 200 mA (at US) |
| Inrush Current | < 40 mA (with Us/Ix to S10) |
| Inrush Current | < 150 mA (with Us/Ix to S12) |
| Inrush Current | > -60 mA (with Us/Ix to S22) |
| Inrush Current | < 40 mA (with Us/Ix to S34) |
| Inrush Current | < 40 mA (with Us/Ix to S35) |
| Current consumption | < 40 mA (with Us/Ix to S10) |
| Current consumption | < 40 mA (with Us/Ix to S12) |
| Current consumption | > -40 mA (with Us/Ix to S22) |
| Current consumption | 0 mA (with Us/Ix to S34) |
| Current consumption | < 5 mA (with Us/Ix to S35) |
| Voltage at input/start and feedback circuit | 24 V DC -15 % / +10 % |
| Filter time | 1 ms (at A1 in the event of voltage dips at Us) |
| Filter time | max. 1.5 ms (at S10, S12; test pulse width) |
| Filter time | 7.5 ms (at S10, S12; test pulse rate) |
| Filter time | Test pulse rate = 5 x Test pulse width |
| Typical response time | < 600 ms (automatic start) |
| Typical response time | < 70 ms (manual start) |
| Typ. starting time with Us | < 600 ms (when controlled via A1) |
| Typical release time | < 20 ms (when controlled via S11/S12 and S21/S22) |
| Typical release time | < 20 ms (when controlled via A1) |
| Concurrence | ∞ |
| Recovery time | < 1 s |
| Delay time | K3(t), K4(t) fixed depending on model |
| Maximum switching frequency | 0.5 Hz |
| Protective circuit | Surge protection; Suppressor diode |
| Max. permissible overall conductor resistance | approx. 11 Ω (Input and start circuits at US) |
| Operating voltage display | 1 x green LED |
| Status display | 4 x green LEDs |
Output data
| Contact switching type | 5 enabling current paths |
| Contact switching type | 1 signaling current path |
| Contact Material | AgSnO2 |
| Maximum Switching Voltage | 250 V AC/DC (Observe the load curve) |
| Minimum Switching Voltage | 5 V AC/DC |
| Limiting Continuous Current | 6 A (N/O contact, pay attention to the derating) |
| Limiting Continuous Current | 6 A (N/C contact) |
| Maximum Inrush Current | 20 A (Δt 100 ms, undelayed contacts) |
| Maximum Inrush Current | 8 A (delayed contacts) |
| Inrush current, minimum | 10 mA |
| Sq. Total current | 55 A2 (observe derating) |
| Interrupting rating (ohmic load) max. | 144 W (24 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 288 W (48 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 110 W (110 V DC, τ = 0 ms, delayed contacts: 77 W) |
| Interrupting rating (ohmic load) max. | 88 W (220 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 1500 VA (250 V AC, τ = 0 ms, delayed contacts: 2000 VA) |
| Maximum interrupting rating (inductive load) | 42 W (24 V DC, τ = 40 ms, delayed contacts: 48 W) |
| Maximum interrupting rating (inductive load) | 42 W (48 V DC, τ = 40 ms, delayed contacts: 40 W) |
| Maximum interrupting rating (inductive load) | 42 W (110 V DC, τ = 40 ms, delayed contacts: 35 W) |
| Maximum interrupting rating (inductive load) | 42 W (220 V DC, τ = 40 ms, delayed contacts: 33 W) |
| Switching capacity min. | 50 mW |
| Switching capacity (360/h cycles) | 4 A (24 V DC) |
| Switching capacity (360/h cycles) | 4 A (230 V AC) |
| Switching capacity (3600/h cycles) | 2.5 A (24 V (DC13)) |
| Switching capacity (3600/h cycles) | 3 A (230 V (AC15)) |
| Output fuse | 10 A gL/gG (N/O contact) |
| Output fuse | 6 A gL/gG (N/C contact) |
Connection technology
| pluggable | yes |
Conductor connection
| Connection Method | Screw connection |
| Conductor cross section, rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Stripping length | 7 mm |
| Screw thread | M3 |
Dimensions
| Width | 45 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
Material specifications
| Color | yellow |
| Housing Material | PBT |
Safety data
| Stop category | 0 |
| Stop category | 1 |
Safety data: EN ISO 13849
| Category | 4 (Undelayed contacts) |
| Category | 3 (delayed contacts) |
| Performance level (PL) | e (for delayed contacts PL d) |
Safety data: IEC 61508 - High demand
| Safety Integrity Level (SIL) | 3 (for delayed contacts SIL 2) |
Safety data: IEC 61508 - Low demand
| Safety Integrity Level (SIL) | 3 (for delayed contacts SIL 2) |
Safety data: EN IEC 62061
| Safety Integrity Level (SIL) | 3 (for delayed contacts SIL 2) |
Ambient conditions
| Degree of Protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient Temperature (Operation) | -20 °C ... 55 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (Operation) | 10 Hz ... 150 Hz, 2g |
CE
| Certificate | CE-compliant |
Air clearances and creepage distances between the power circuits
| Standards/regulations | DIN EN 50178/VDE 0160 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 2981224?
Proax is an authorized distributor of Phoenix Contact 2981224 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2981143 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 1.0 s, plug-in screw connection terminal blocks- 2981125 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 2 s, plug-in screw connection terminal blocks
- 2981240 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 4 s, plug-in screw connection terminal blocks
- 2981266 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 5 s, plug-in screw connection terminal blocks
- 2981282 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 6.0 s, plug-in screw connection terminal blocks
- 2981088 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 10 s, plug-in screw terminal block
- 2981305 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 15 s, plug-in screw connection terminal blocks
- 2981321 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 20 s, plug-in screw connection terminal blocks
- 2981347 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 30 s, plug-in screw connection terminal blocks
- 2981101 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 0.5 s, plug-in screw connection terminal blocks
- 2981169 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 1.5 s, plug-in screw connection terminal blocks
- 2981208 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with a fixed dropout delay of 2.5 s, plug-in screw connection terminal blocks
2981800 - Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, automatic or manual activation, 2 N/O contacts with a dropout delay of 0.1 s ... 30 s, plug-in screw connection terminal block
2981020 - Safety relay for SIL 3 high-demand and low-demand applications, also approved in accordance with EN 50156, DNV, and EN ISO 13849, emergency stop and safety door monitoring, 1-channel, 2 enabling current paths, 1 signal contact, plug-in screw terminal blocks, width: 22.5 mm
2986711 - Coupling relay for SIL 3 low demand applications, couples digital output signals to the periphery, 1 enabling current path, module for F&G applications, test pulse filter, plug-in screw connection, 17.5 mm width
2986960 - Safe coupling relay for SIL 3 high- and low-demand applications, couples digital output signals to the periphery, two enabling current paths, one signal contact, module for safe state off applications, integrated test pulse filter, plug-in screw connection, width: 17.5 mm
2981978 - Safe coupling relay for SIL 3 high- and low-demand applications, couples digital output signals to the periphery, one enabling current path, one signal contact, module for safe state off applications, test pulse filter, fuse, plug-in screw connection, width: 17.5 mm
2986575 - Safe coupling relay for SIL 2 high- and low-demand applications, couples digital output signals to the periphery, two enabling current paths, one signal contact, module for safe state off applications, integrated test pulse filter, plug-in screw connection, width: 17.5 mm
2902725 - Multifunctional safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in screw terminal block
2981538 - 2-channel over-speed and zero-speed safety relay up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 4 N/O contacts, suitable for connecting incremental encoders and initiators, plug-in screw terminal blocks, width: 45 mm