Proax
CADEN
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2924236
AllMeasurement & MonitoringSignal conditionerActive input signal conditioners

2924236

Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
PHX2924236
MPN
MACX MCR-EX-SL-RPSSI-2I-SP
Weight
0.235 kg
This product is Not Cancellable/Not Returnable

MACX MCR-EX-SL-RPSSI-2I-SP - Repeater power supply

Ex i measuring transducer power supply and input signal conditioner, HART-transparent. Transfers supplied or active 0/4 mA ... 20 mA electrical isolation signals from the Ex area to two loads in the safe area. 4-way electrical isolation, Push-in connection, SIL, PL.

  • 0/4 mA ... 20 mA input, intrinsically safe, [Ex ia], powered and not powered
  • Measuring transducer supply voltage > 16 V
  • Two electrically isolated 0/4 mA ... 20 mA (active) outputs
  • Bidirectional HART transmission (both outputs)
  • Error indication according to NAMUR NE 43
  • SIL 2 according to IEC/EN 61508
  • Safe electrical isolation between input, outputs, and supply
  • Power supply possible via DIN rail connector
  • Installation in zone 2 permitted
  • Plug-in connection terminals, push-in connection technology
  • Housing width: 12.5 mm
  • Minimal power dissipation
  • High transmission accuracy
Technical Specifications

Product properties

Product familyMACX Analog
No. of channels1
TypeEx i signal conditioners with SIL and PL Functional Safety

Electrical properties

Electrical isolation3-way isolation
Electrical isolation between input and outputyes
Signal transmission behaviorIn = Out
Step response (10-90%)1.3 ms (for jump 4 mA ... 20 mA, typical)
Maximum temperature coefficient< 0.01 %/K
Maximum transmission error< 0.1 % (of final value)
Transmission error, typical< 0.05 % (of final value)

Electrical isolation

Overvoltage categoryII
Pollution degree2

Electrical isolation Input/output/power supply IEC/EN 61010-1

Standards/regulationsIEC/EN 61010-1
Rated Insulation Voltage300 Vrms
Test voltage2.5 kV AC (50 Hz, 60 s)
InsulationSafe isolation

Electrical isolation Input/output IEC/EN 60079-11

Standards/regulationsIEC/EN 60079-11
Rated Insulation Voltage265 Vrms

Electrical isolation Input/power supply IEC/EN 60079-11

Standards/regulationsIEC/EN 60079-11
Rated Insulation Voltage265 Vrms

Electrical isolation Output 1/output 2

Test voltage1.5 kV AC (50 Hz, 60 s)

Supply

DesignationRepeater power supply operation
Nominal Supply Voltage24 V DC -20 % ... +25 %
Supply Voltage Range19.2 V DC ... 30 V DC
Max. current consumption< 75 mA (24 V DC / 20 mA)
Power dissipation< 1.45 W (24 V DC / 20 mA)
Power consumption≤ 1.8 W
DesignationSignal conditioner operation
Nominal Supply Voltage24 V DC -20 % ... +25 %
Supply Voltage Range19.2 V DC ... 30 V DC
Max. current consumption< 46 mA (24 V DC / 20 mA)
Power dissipation< 1.2 W (24 V DC / 20 mA)

Signal: Repeater power supply operation

Description of the inputRepeater power supply operation
Number of Inputs1
Current Input Signal4 mA ... 20 mA
Transmitter supply voltage> 16 V (20 mA)
Transmitter supply voltage> 15.1 V (23 mA)
Polarization and surge protectionYes
Underload/overload signal range0 mA ... 24 mA (Extended transmission range for diagnostics)

Signal: Signal conditioner operation

Description of the inputSignal conditioner operation
Current Input Signal0 mA ... 20 mA
Current Input Signal4 mA ... 20 mA
Voltage drop< 3.9 V (in input isolating amplifier operation)
Underload/overload signal range0 mA ... 24 mA (Extended transmission range for diagnostics)

Signal: Repeater power supply operation

Output descriptionRepeater power supply operation
Number of Outputs2
Current Output Signal4 mA ... 20 mA (Output 1 and output 2 active)
Load/Output Load Current Output< 450 Ω (20 mA)
Load/Output Load Current Output< 380 Ω (23 mA)
Output ripple< 20 mVrms
Output behavior in the event of an error0 mA (Cable break in the input)
Output behavior in the event of an error≥ 23 mA (Cable short-circuit in the input)
Underload/overload signal range0 mA ... 24 mA (Extended transmission range for diagnostics)

Signal: Signal conditioner operation

Output descriptionSignal conditioner operation
Current Output Signal0 mA ... 20 mA (active)
Current Output Signal4 mA ... 20 mA (active)
Load/Output Load Current Output< 450 Ω (20 mA)
Load/Output Load Current Output< 380 Ω (23 mA)
Output ripple< 20 mVrms
Output behavior in the event of an error0 mA (Cable break in the input)
Output behavior in the event of an error0 mA (Cable short-circuit in the input)
Underload/overload signal range0 mA ... 24 mA (Extended transmission range for diagnostics)

Connection data

Connection MethodPush-in connection
Stripping length10 mm
Conductor cross section rigid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section flexible (2 conductors with same cross section)0.25 mm² ... 0.34 mm² (TWIN ferrule without plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section)0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve)
Conductor cross section AWG24 ... 14
Conductor cross section AWG24 ... 22 (TWIN ferrule without plastic sleeve)
Conductor cross section AWG20 ... 16 (TWIN ferrule with plastic sleeve)

Ex data

Ex installation (EPL)Gc
Ex installation (EPL)Div. 2
Ex i circuits (EPL)Ga
Ex i circuits (EPL)Da
Ex i circuits (EPL)Ma
Ex i circuits (EPL)Div. 1

Safety data: Repeater power supply operation

Max. output voltage Uo25.2 V
Max. output current Io93 mA
Max. output power Po587 mW
Safety-related maximum voltage Um253 V AC
Safety-related maximum voltage Um125 V DC
I (simple circuit): Max. external inductivity Lo / Max. external capacitance Co40 mH / 4.8 µF
IIA (simple circuit): Max. external inductivity Lo / Max. external capacitance Co26 mH / 2.9 µF
IIB (simple circuit): Max. external inductivity Lo / Max. external capacitance Co14 mH / 820 nF
IIC (simple circuit): Max. external inductivity Lo / Max. external capacitance Co3 mH / 107 nF
IIA (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co26 mH / 470 nF, 20 mH / 570 nF, 1 mH / 630 nF, 0.5 mH / 720 nF, 0.1 mH / 1.1 µF, 0.005 mH / 2.9 µF
IIB/IIIC (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co16 mH / 370 nF, 1 mH / 430 nF, 500 µH / 510 nF, 200 µH / 660 nF, 100 µH / 820 nF
IIC (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co2.2 mH / 47 nF, 2 mH / 49 nF, 1 mH / 63 nF, 500 µH / 80 nF, 200 µH / 107 nF
I (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co37 mH / 0.54 µF, 0.2 mH / 1.1 µF, 10 µH / 2.8 µF, 0.001 mH / 4.15 µF

Safety data: Signal conditioner operation

Input voltage Ui≤ 30 V
Input current Ii≤ 150 mA
Max. internal inductance Linegligible
Max. internal capacitance Cinegligible
Safety-related maximum voltage Um253 V AC
Safety-related maximum voltage Um125 V DC

Data communication (bypass)

HART FunctionYes
Protocols SupportedHART-transparent

Signaling

Status displayGreen LED (supply voltage)

Dimensions

Width12.5 mm
Height107.9 mm
Depth113.7 mm
Depth NS 35/7,5114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Material specifications

Colorgray (RAL 7042)
Flammability rating according to UL 94V0 (Housing)
Housing MaterialPA 6.6-FR

Ambient conditions

Degree of ProtectionIP20 (not assessed by UL)
Ambient Temperature (Operation)-40 °C ... 60 °C (Any mounting position)
Ambient Temperature (Operation)-40 °C ... 70 °C (Derating)
Ambient temperature (storage/transport)-40 °C ... 80 °C
Permissible humidity (operation)10 % ... 95 % (non-condensing)

Altitude range (≤ 2000 m)

Altitude≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient Temperature (Operation)-40 °C ... 60 °C
Ambient Temperature (Operation)-40 °C ... 70 °C (Derating)
Rated Insulation Voltage375 VPP (Power supply, input / output)

Altitude range (≤ 3000 m)

Height Range> 2000 m ... 3000 m
Ambient Temperature (Operation)-40 °C ... 54 °C
Ambient Temperature (Operation)-40 °C ... 63 °C (Derating)
Rated Insulation Voltage190 V AC (Power supply, input / output)
Rated Insulation Voltage110 V DC (Power supply, input / output)

Altitude range (≤ 4000 m)

Height Range> 3000 m ... 4000 m
Ambient Temperature (Operation)-40 °C ... 48 °C
Ambient Temperature (Operation)-40 °C ... 56 °C (Derating)
Rated Insulation Voltage60 V AC/DC (Power supply, input / output)

Altitude range (≤ 5000 m)

Height Range> 4000 m ... 5000 m
Ambient Temperature (Operation)-40 °C ... 42 °C
Ambient Temperature (Operation)-40 °C ... 49 °C (Derating)
Rated Insulation Voltage60 V AC/DC (Power supply, input / output)

CE

CertificateCE-compliant
Noteand EN 61326

ATEX

Identification II (1) G [Ex ia Ga] IIC
Identification II (1) D [Ex ia Da] IIIC
Identification II 3(1) G Ex ec [ia Ga] IIC T4 Gc
Identification I (M1) [Ex ia Ma] I
CertificateBVS 10 ATEX E 143 X

IECEx

Identification[Ex ia Ga] IIC
Identification[Ex ia Da] IIIC
IdentificationEx ec [ia Ga] IIC T4 Gc
Identification[Ex ia Ma] I
CertificateIECEx BVS 10.0097X

CCC / China-Ex

Identification[Ex ia Ga] IIC
Identification[Ex ia Da] IIIC
IdentificationEx ec [ia Ga] IIC T4 Gc
Certificate2022122316115971

UL, USA/Canada

IdentificationIS for Class I,II,III, Division 1 and Zone 0
IdentificationInstallation in Class I, Division 2 and Zone 2
Certificate, C.D.-No 83104549
IdentificationClass I Div 2; IS for Class I, II, III Div 1
Certificate, C.D.-No 83104549

Shipbuilding approval

CertificateDNV GL TAA000020C

Safety Integrity Level (SIL, IEC 61508)

Identification2
CertificateIN-AT-AS-MRL-23-00432A

Systematic Capability

Identification3

Performance Level (ISO 13849)

Identificationd / KAT 2

INMETRO

Identification[Ex ia Ga] IIC
Identification[Ex ia Da] IIIC
IdentificationEx ec [ia Ga] IIC T4 Gc
Identification[Ex ia Ma] I
CertificateDNV 18.0139 X

DNV GL data

TemperatureB
HumidityB
VibrationA
EMCA
EnclosureRequired protection according to the Rules shall be provided upon installation on board

EMC data

Noise immunityEN 61000-6-2
NoteWhen being exposed to interference, there may be minimal deviations.
Electromagnetic compatibilityConformance with EMC directive
Noise emissionEN 61000-6-4

Standards and Regulations

Electrical isolation3-way isolation

GB Standard

Standards/regulationsGB/T 3836.1
Standards/regulationsGB/T 3836.3
Standards/regulationsGB/T 3836.4

Mounting

Mounting TypeDIN rail mounting
Accessories
  • Phoenix Contact2695439
    2695439
    ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rail in accordance with EN 60715
  • Phoenix Contact2904684
    2904684
    TC-2D37SUB-ADIO32-2EX-P-UNI - Universal Termination Carrier for connecting 16 two-channel MACX Analog Ex i signal conditioners to digital or analog I/O cards, via two D-SUB connectors, 37-pos. (1:1 connection)
  • Phoenix Contact1003824
    1003824
    Cable adapter - GW HART USB MODEM
  • Phoenix Contact2865625
    2865625
    Power and error message module - MACX MCR-PTB
  • Phoenix Contact2924184
    2924184
    MACX MCR-PTB-SP - Power and fault signaling module with Push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector
  • Phoenix Contact0201663
    0201663
    MPS-IH WH - Insulating sleeve, color: white
  • Phoenix Contact0201676
    0201676
    MPS-IH RD - Insulating sleeve, color: red
  • Phoenix Contact0201689
    0201689
    MPS-IH BU - Insulating sleeve, color: blue
  • Phoenix Contact0201692
    0201692
    MPS-IH YE - Insulating sleeve, color: yellow
  • Phoenix Contact0201702
    0201702
    MPS-IH GN - Insulating sleeve, color: green
  • Phoenix Contact0201728
    0201728
    MPS-IH GY - Insulating sleeve, color: gray
  • Phoenix Contact0201731
    0201731
    MPS-IH BK - Insulating sleeve, color: black
  • Phoenix Contact0201744
    0201744
    Test plugs - MPS-MT
  • Phoenix Contact0819291
    0819291
    0819291 -
  • Phoenix Contact0822602
    0822602
    0822602 -
  • Phoenix Contact0828094
    0828094
    0828094 -
  • Phoenix Contact0828789
    0828789
    0828789 -
  • Phoenix Contact0828871
    0828871
    0828871 -
  • Phoenix Contact0828872
    0828872
    0828872 -
  • Phoenix Contact0831705
    0831705
    0831705 -
  • Phoenix Contact0831732
    0831732
    0831732 -

Why Proax for Phoenix Contact 2924236?

Proax is an authorized distributor of Phoenix Contact 2924236 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size1
Recommended
  • Phoenix Contact2865366
    2865366
    Repeater power supply - MACX MCR-EX-SL-RPSSI-2I
  • Phoenix Contact2908855
    2908855
    Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-1S
  • Phoenix Contact2908856
    2908856
    Repeater power supply - MACX MCR-EX-SL-RPSSI-2I-1S-SP
  • Phoenix Contact2865340
    2865340
    Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I
  • Phoenix Contact2811909
    2811909
    MACX MCR-EX-SL-RPSSI-I-DUMMY - Sample without function; sample module of a MACX MCR-EX-SL-RPSSI-I.
  • Phoenix Contact2924016
    2924016
    Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-SP
  • Phoenix Contact2865793
    2865793
    Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-UP
  • Phoenix Contact2924029
    2924029
    Power/input isolating amplifier - MACX MCR-EX-SL-RPSSI-I-UP-SP
  • Phoenix Contact2865382
    2865382
    Signal isolator - MACX MCR-EX-SL-RPSS-2I-2I
  • Phoenix Contact2924676
    2924676
    Signal isolator - MACX MCR-EX-SL-RPSS-2I-2I-SP
  • Phoenix Contact2865573
    2865573
    MACX MCR-EX-SL-RTD-I-NC, Ex i temperature measuring transducer: Converts signals from resistance thermometers installed in Ex areas and transmits a 0/4-20 mA signal to a load in the safe area. Freely programmable, 3-way isolation.
  • Phoenix Contact2924168
    2924168
    MACX MCR-EX-SL-RTD-I-SP-NC, Ex i temperature measuring transducer: Converts signals from resistance thermometers installed in Ex areas and transmits a 0/4-20 mA signal to a load in the safe area. Freely programmable, 3-way isolation, spring-cage terminal blocks.
  • Phoenix Contact2906155
    2906155
    Solenoid driver - MACX MCR-EX-SL-SD-24-48-LFD
  • Phoenix Contact2906156
    2906156
    Solenoid driver - MACX MCR-EX-SL-SD-24-48-LFD-SP
  • Phoenix Contact2865609
    2865609
    Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP
  • Phoenix Contact2924126
    2924126
    Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP-SP
  • Phoenix Contact2924867
    2924867
    Solenoid driver - MACX MCR-EX-SL-SD-23-48-LFD
  • Phoenix Contact2924870
    2924870
    Solenoid driver - MACX MCR-EX-SL-SD-23-48-LFD-SP
  • Phoenix Contact2905669
    2905669
    Solenoid driver - MACX MCR-EX-SL-SD-21-25-LFD
  • Phoenix Contact2905674
    2905674
    Ex i solenoid driver for controlling Ex i solenoid valves in hazardous areas, logic input, off-load voltage 21.1 V, current limitation at 25.1 mA, line fault transparency, error message output, up to SIL 3 according to IEC 61508; Push-in connection.

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability