Proax
CADEN
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2865515
AllMeasurement & MonitoringSignal conditionerSolenoid drivers

2865515

Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
PHX2865515
MPN
MACX MCR-EX-SL-SD-21-60-LP
Weight
0.173 kg
This product is Not Cancellable/Not Returnable

MACX MCR-EX-SL-SD-21-60-LP - Solenoid driver

Ex i solenoid driver. For the intrinsically safe control of Ex i solenoid valves, alarm modules or LEDs installed in the Ex area. Current limitation at 58 mA. For gases up to Group IIB, loop-powered, electrical isolation, SIL 3. Screw connection.

  • Mechanically compatible with the DIN rail connector
  • Various output characteristic curves compatible with standard solenoid valves
  • Loop-powered: the required power is supplied via the control signal on the input side.
  • Installation in zone 2, protection type "n" (EN 60079-15) permitted
  • Up to SIL 3 in accordance with IEC 61508
  • 2-way electrical isolation
  • Input: 19.2 V DC … 30 V DC
  • Output [Ex ia] IIB
Technical Specifications

Product properties

Product familyMACX Analog
No. of channels1
TypeEx i signal conditioners with SIL functional safety
Compatible ValveASCO Coil 302 (12 V)
Compatible ValveASCO Coil 302 (24 V)
Compatible ValveBürkert Coil AC 10 standard
Compatible ValveBürkert Coil AC 10 high resistance
Compatible ValveFESTO Coil MFH-...IA-SA-EX GBXE022AIAD03
Compatible ValveFESTO Coil (J)MFH-...BIA-SA-EX GBXE022AIAD03
Compatible ValveNorgren Herion Coil 2050
Compatible ValveNorgren Herion Coil 2051
Compatible ValveNorgren Herion Coil 2052
Compatible ValveNorgren Herion Coil 2053
Compatible ValveParker Coil VZ95 482160.01 EEx ia IIB T6
NoteThis is an extract of possible combinations of valves and solenoid drivers.

Electrical properties

Electrical isolation2-way isolation
Maximum temperature coefficient0.01 %/K

Electrical isolation

Test voltage2.5 kV AC (50 Hz, 60 s)
Overvoltage categoryII
Pollution degree2

Electrical isolation Output/input IEC/EN 60079-11

Standards/regulationsIEC/EN 60079-11
Rated Insulation Voltage375 VPP

Electrical isolation Output/input IEC/EN 61010-1

Standards/regulationsIEC/EN 61010-1
Rated Insulation Voltage300 Vrms
InsulationSafe isolation

Supply

Supply Voltage Rangeloop-powered, no external supply necessary
Power dissipation< 1.325 W

Signal: Voltage

Number of Inputs1
Voltage input signal19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %)
Max. current input signal95 mA (Ue = 24 V DC)
Output descriptionintrinsically safe
Number of Outputs1
Output Voltage12.9 V DC (58 mA)
Output resistor133.4 Ω (Internal resistance Ri)
Current limitation58 mA
Response time20 ms
Non-load voltage21.9 V DC
Short-circuit-proofyes

Connection data

Connection MethodScrew connection
Stripping length7 mm
Screw threadM3
Conductor cross section rigid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 14
Tightening torque0.5 Nm ... 0.6 Nm

Test socket

Max. diameter2 mm

Ex data

Ex installation (EPL)Gc
Ex installation (EPL)Div. 2
Ex i circuits (EPL)Ga
Ex i circuits (EPL)Da
Ex i circuits (EPL)Ma
Ex i circuits (EPL)Div. 1

Safety data

Max. internal inductance Linegligible
Max. internal capacitance Cinegligible
Max. output voltage Uo25.1 V
Max. output current Io188 mA
Max. output power Po1.18 W
Safety-related maximum voltage Um253 V AC
Safety-related maximum voltage Um125 V DC
IIB/IIIC (simple circuit): Max. external inductivity Lo / Max. external capacitance Co4 mH / 0.83 µF
IIB/IIIC (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co2 mH / 300 nF, 1 mH / 370 nF, 0.5 mH / 460 nF, 0.1 mH / 790 nF

Signaling

Status displayYellow LED (switching state / status, lights up when output circuit is active)

Dimensions

Width12.5 mm
Height112.5 mm
Depth113.7 mm
Depth NS 35/7,5114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Material specifications

Colorgray (RAL 7042)
Flammability rating according to UL 94V0 (Housing)
Housing MaterialPA 6.6-FR

Ambient conditions

Degree of ProtectionIP20 (not assessed by UL)
Ambient Temperature (Operation)-40 °C ... 60 °C (Any mounting position)
Ambient temperature (storage/transport)-40 °C ... 80 °C
Altitude≤ 2000 m
Permissible humidity (operation)10 % ... 95 % (non-condensing)

CE

CertificateCE-compliant
Noteand EN 61326

ATEX

Identification II (1) G [Ex ia Ga] IIB/IIA
Identification II (1) D [Ex ia Da] IIIC
Identification II 3 (1)G Ex nA [ia IIB Ga] IIC T4 Gc X
CertificateIBExU 07 ATEX 1133X

UKCA Ex (UKEX)

Identification I (M1) [Ex ia Ma] I
Identification II (1) G [Ex ia Ga] IIB
Identification II (1) D [Ex ia Da] IIIC
Identification II 3 (1) Ex ec [ia IIB Ga] IIC T4 Gc
CertificateCML 22UKEX3526X

IECEx

Identification[Ex ia Ga] IIB/IIA
Identification[Ex ia Da] IIIC
IdentificationEx nA [ia IIB Ga] IIC T4 Gc
CertificateIECEx IBE 08.0002X

CCC / China-Ex

Identification[Ex ia Ga] IIC
Identification[Ex iaD]
IdentificationEx nA [ia Ga] IIC T4 Gc
CertificateNEPSI GYJ20.1316X

UL, USA/Canada

IdentificationUL 61010 Listed
IdentificationClass I, Div. 2, Groups A, B, C, D T4
IdentificationClass I, Div. 2, Groups IIC, IIB, IIA T4
IdentificationAssociated apparatus for use in Class I, Division 1, Groups C,D
IdentificationAssociated apparatus for use in Class II, Div.1 Groups E,F,G
IdentificationAssociated apparatus for use in Class III, Division 1
IdentificationAssociated apparatus for use in Class I, Zone 0,1,2, Groups IIB, IIA
Certificate, C.D.-No 83104549
IdentificationClass I Div 2; IS for Class I, II, III Div 1
Certificate, C.D.-No 83104549

Shipbuilding approval

CertificateDNV GL TAA000020C

Safety Integrity Level (SIL, IEC 61508)

Identification3

INMETRO

Identification[Ex ia Ga] IIC/IIB/IIA
Identification[Ex ia Da] IIIC
IdentificationEx nA [ia IIC Ga] IIC T4 Gc
CertificateDNV 18.0115 X

DNV GL data

TemperatureB
HumidityB
VibrationA
EMCA
EnclosureRequired protection according to the Rules shall be provided upon installation on board

EMC data

Noise immunityEN 61000-6-2
Electromagnetic compatibilityConformance with EMC directive
Noise emissionEN 61000-6-4

Standards and Regulations

Electrical isolation2-way isolation

GB Standard

Standards/regulationsGB 3836.1
Standards/regulationsGB 3836.4
Standards/regulationsGB 3836.8
Standards/regulationsGB 3626.20
Standards/regulationsGB 12476.1
Standards/regulationsGB 12476.4

Mounting

Mounting TypeDIN rail mounting
Accessories
  • Phoenix Contact2865625
    2865625
    Power and error message module - MACX MCR-PTB
  • Phoenix Contact2924184
    2924184
    MACX MCR-PTB-SP - Power and fault signaling module with Push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector
  • Phoenix Contact2902932
    2902932
    TC-D37SUB-AIO16-EX-PS-UNI - Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection), with HART multiplexer connection
  • Phoenix Contact2924854
    2924854
    TC-D37SUB-ADIO16-EX-P-UNI - Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection)
  • Phoenix Contact0201663
    0201663
    MPS-IH WH - Insulating sleeve, color: white
  • Phoenix Contact0201676
    0201676
    MPS-IH RD - Insulating sleeve, color: red
  • Phoenix Contact0201689
    0201689
    MPS-IH BU - Insulating sleeve, color: blue
  • Phoenix Contact0201692
    0201692
    MPS-IH YE - Insulating sleeve, color: yellow
  • Phoenix Contact0201702
    0201702
    MPS-IH GN - Insulating sleeve, color: green
  • Phoenix Contact0201728
    0201728
    MPS-IH GY - Insulating sleeve, color: gray
  • Phoenix Contact0201731
    0201731
    MPS-IH BK - Insulating sleeve, color: black
  • Phoenix Contact0201744
    0201744
    Test plugs - MPS-MT
  • Phoenix Contact0819291
    0819291
    0819291 -
  • Phoenix Contact0822602
    0822602
    0822602 -
  • Phoenix Contact0828094
    0828094
    0828094 -
  • Phoenix Contact0828789
    0828789
    0828789 -
  • Phoenix Contact0828871
    0828871
    0828871 -
  • Phoenix Contact0828872
    0828872
    0828872 -
  • Phoenix Contact0831705
    0831705
    0831705 -
  • Phoenix Contact0831732
    0831732
    0831732 -

Why Proax for Phoenix Contact 2865515?

Proax is an authorized distributor of Phoenix Contact 2865515 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size1
Recommended
  • Phoenix Contact2905669
    2905669
    Solenoid driver - MACX MCR-EX-SL-SD-21-25-LFD
  • Phoenix Contact2905674
    2905674
    Ex i solenoid driver for controlling Ex i solenoid valves in hazardous areas, logic input, off-load voltage 21.1 V, current limitation at 25.1 mA, line fault transparency, error message output, up to SIL 3 according to IEC 61508; Push-in connection.
  • Phoenix Contact2865492
    2865492
    Solenoid driver - MACX MCR-EX-SL-SD-21-25-LP
  • Phoenix Contact2924113
    2924113
    Solenoid driver - MACX MCR-EX-SL-SD-21-25-LP-SP
  • Phoenix Contact2865764
    2865764
    Solenoid driver - MACX MCR-EX-SL-SD-21-40-LP
  • Phoenix Contact2924139
    2924139
    Solenoid driver - MACX MCR-EX-SL-SD-21-40-LP-SP
  • Phoenix Contact2924100
    2924100
    Solenoid driver - MACX MCR-EX-SL-SD-21-60-LP-SP
  • Phoenix Contact2924867
    2924867
    Solenoid driver - MACX MCR-EX-SL-SD-23-48-LFD
  • Phoenix Contact2924870
    2924870
    Solenoid driver - MACX MCR-EX-SL-SD-23-48-LFD-SP
  • Phoenix Contact2906155
    2906155
    Solenoid driver - MACX MCR-EX-SL-SD-24-48-LFD
  • Phoenix Contact2906156
    2906156
    Solenoid driver - MACX MCR-EX-SL-SD-24-48-LFD-SP
  • Phoenix Contact2865609
    2865609
    Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP
  • Phoenix Contact2924126
    2924126
    Solenoid driver - MACX MCR-EX-SL-SD-24-48-LP-SP
  • Phoenix Contact2865586
    2865586
    MACX MCR-EX-SL-TC-I-NC, Ex i temperature measuring transducer: Converts signals from thermocouples installed in Ex areas and mV sources and transmits a 0/4-20 mA signal to a load in a safe area. Freely programmable, 3-way isolation
  • Phoenix Contact2906164
    2906164
    Limit value switches - MACX MCR-EX-SL-UI-REL
  • Phoenix Contact2865382
    2865382
    Signal isolator - MACX MCR-EX-SL-RPSS-2I-2I
  • Phoenix Contact2924676
    2924676
    Signal isolator - MACX MCR-EX-SL-RPSS-2I-2I-SP
  • Phoenix Contact2865573
    2865573
    MACX MCR-EX-SL-RTD-I-NC, Ex i temperature measuring transducer: Converts signals from resistance thermometers installed in Ex areas and transmits a 0/4-20 mA signal to a load in the safe area. Freely programmable, 3-way isolation.
  • Phoenix Contact2924168
    2924168
    MACX MCR-EX-SL-RTD-I-SP-NC, Ex i temperature measuring transducer: Converts signals from resistance thermometers installed in Ex areas and transmits a 0/4-20 mA signal to a load in the safe area. Freely programmable, 3-way isolation, spring-cage terminal blocks.
  • Phoenix Contact2865366
    2865366
    Repeater power supply - MACX MCR-EX-SL-RPSSI-2I

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability