Official DistributorSKU
MPN
FL SWITCH IRT 2TX 2POF
Weight
0.619 kg
This product is Not Cancellable/Not Returnable
Series FL-SWITCH-IRT
FL SWITCH IRT 2TX 2POF - Industrial Ethernet Switch
Ethernet Switch, two ports in RJ45 format and two ports in POF SC-RJ format for PROFINET RT/IRT, DIN rail mountable
- Cut-through switching
- MRP (client and manager)
- SNMP
- PN IO device
- Flat design
Technical Specifications
Dimensions
| Width | 127 mm |
| Height | 95 mm |
| Depth | 69 mm |
Material specifications
| Material base plate | Die-cast aluminum, corrosion-resistant |
| Housing Material | Aluminum, transparently anodized |
Mounting
| Mounting Type | DIN rail mounting |
Ethernet
| Connection Method | RJ45 |
| Transmission Speed | 10/100 Mbps |
| Transmission physics | Copper |
| Transmission length | 100 m (per segment) |
| Signal LEDs | Supply voltage, data transmission, error, link, activity |
| No. of channels | 2 (RJ45 ports) |
POF/PCF
| Connection Method | POF SC-RJ |
| Transmission Speed | 100 Mbps (full duplex) |
| Transmission physics | POF-SCRJ |
| Transmission length | up to 100 m (depending on the fiber used) |
| Wavelength | 650 nm |
| No. of channels | 2 (SC-RJ) |
Product properties
| Product family | Managed Switch IRT |
| Type | Block design |
Switch functions
| Basic Functions | Cut-through/store-and-forward switch complies with IEEE 802.3 2 priority classes in accordance with IEEE802.1 P, TCP/IP protocol, DCP capable, integrated web server function, PROFINET device. |
| Signal contact control voltage | 24 V (typical) |
| Signal contact control current | typical |
| PROFINET conformance class | Conformance-Class C |
| PROFINET device function | PROFINET device |
| PROFINET specification | PROFINET-IO RT/IRT, Spec. 2.x |
| Redundancy | MRP (Media Redundancy Protocol) |
| Status and diagnostic indicators | LEDs: US1, US2 (power supply), Fail (alarm contact), 3 LEDs per Ethernet port (Link, Activity, and FO status), and BF (Bus Fail) |
| Supported browsers | Internet Explorer 5.5 or higher |
Security functions
| Basic Functions | Cut-through/store-and-forward switch complies with IEEE 802.3 2 priority classes in accordance with IEEE802.1 P, TCP/IP protocol, DCP capable, integrated web server function, PROFINET device. |
Electrical properties
| Local diagnostics | US1/2 Supply voltage US1, US2 Green LED |
| Local diagnostics | FAIL Div. LED red |
| Local diagnostics | LINK Link status Green LED |
| Local diagnostics | ACT Receiving/sending telegrams Green LED |
| Local diagnostics | BF Bus errors LED red |
| Local diagnostics | FO Orange LED |
| Maximum power dissipation for nominal condition | 5.64 W |
| Test section | Between the Ethernet ports 1500 V AC 1 min. |
| Test section | 24 V supply (US) / FE 500 V DC 1 min. |
| Transmission medium | Copper |
Supply
| Supply voltage (DC) | 24 V DC (redundant) |
| Supply Voltage Range | 18.5 V DC ... 30.2 V DC |
| Power supply connection | Via COMBICON, max. conductor cross section 2.5 mm² |
| Residual ripple | 3.6 VPP (within the permitted voltage range) |
| Max. current consumption | 235 mA |
| Typical current consumption | 235 mA (at US = 24 V DC) |
| Current consumption | 235 mA (at 24 V DC) |
Function
| Signal contact control voltage | 24 V (typical) |
| Signal contact control current | typical |
Supply: Module electronics
| Supply Voltage | 24 V DC |
| Supply Voltage Range | 18 V DC ... 32 V DC (including ripple) |
Connection data
| Connection Method | Screw connection |
| Conductor cross section, rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Stripping length | 7 mm |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Vibration (Operation) | in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz |
| Air pressure (operation) | 86 kPa ... 108 kPa (2000 m above mean sea level) |
| Air pressure (storage/transport) | 66 kPa ... 108 kPa (3500 m above sea level) |
EMC data
| Conformance with EMC directives | EN 55022 (emitted interference) Class A |
| Conformance with EMC directives | EN 61000-4-2 (ESD) Criterion A |
| Conformance with EMC directives | EN 61000-4-3 (electromagnetic fields) Criterion A, 10 V/m |
| Conformance with EMC directives | EN 61000-4-5 (surge) Criterion B |
| Conformance with EMC directives | EN 61000-4-4 (EFT burst) Criterion A, 2.2 kV |
| Conformance with EMC directives | EN 61000-4-6 EN 61000-4-6 (line noise immunity) Criterion A, Field intensity: 10 V/m |
| Conformance with EMC directives | EN 61000-4-3 (electromagnetic fields) EN 61000-4-3 (electromagnetic fields) Criterion A, 10 V/m |
| Conformance with EMC directives | 60950-1 |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Functionality
| Basic Functions | Cut-through/store-and-forward switch complies with IEEE 802.3 2 priority classes in accordance with IEEE802.1 P, TCP/IP protocol, DCP capable, integrated web server function, PROFINET device. |
System requirements
| Supported browsers | Internet Explorer 5.5 or higher |
Signaling
| Status display | LEDs: US1, US2 (power supply), Fail (alarm contact), 3 LEDs per Ethernet port (Link, Activity, and FO status), and BF (Bus Fail) |
Accessories
FL MEM PLUG - Exchangeable configuration memory of the device settings for simple device exchange and set-up
QUINT-PS/1AC/24DC/5 - Primary-switched power supply with SFB technology, 1 AC, output current 5 A
FL MEM PLUG/MRM - Exchangeable configuration memory of the device settings for simple device exchange and set-up In addition, the Media Redundancy Manager (MRM) license for use is stored within the Media Redundancy protocol (MRP).
NBC-R4AC/10G-R4AC/10G-94F/2,0 - Patch cable, CAT6A, 4-pair, shielded, connection not crossed (line), assembled at both ends with RJ45/IP20 connectors, outer sheath material: PUR, length: 2.0 m- NBC-R4AC/10G-R4AC/10G-94F/3,0 - Patch cable, CAT6A, 4-pair, shielded, connection not crossed (line), assembled at both ends with RJ45/IP20 connectors, outer sheath material: PUR, length: 3.0 m
NBC-R4AC/1,0-93B/R4AC - Patch cable, degree of protection: IP20, cable length: 1 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET- NBC-R4AC/2,0-93B/R4AC - Patch cable, degree of protection: IP20, cable length: 2 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET
- Patch cable, degree of protection: IP20, cable length: 5 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET
Why Proax for Phoenix Contact 2700691?
Proax is an authorized distributor of Phoenix Contact 2700691 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
FL SWITCH EP7428R-L3F1 - Ethernet gigabit modular switch with slots for twenty-four 10/100/1000 Mbps copper or 100/1000 Mbps SFP ports and four 1000/10,000 Mbps SFP ports using hot-swappable rear modules
Ethernet Lean Managed Switch with four 10/100 Mbps RJ45 ports and one 100 Mbps FX-SC multi-mode port- Ethernet Lean Managed Switch with four 10/100 Mbps RJ45 ports and one 100 Mbps FX-SC single-mode port
Ethernet Lean Managed Switch with four 10/100 Mbps RJ45 ports and one 100 Mbps FX-ST multimode port
