Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
AXL F DOR4/2 AC/220DC 1F
Weight
0.256 kg
This product is Not Cancellable/Not Returnable

AXL F DOR4/2 AC/220DC 1F - Relay Module

Axioline F, Relay module, Relay outputs: 4 (floating), N/O contact, 220 V DC, 230 V AC, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

  • Meets the requirements of IEC 61850-3 and IEEE 1613
  • 4 monostable relays
  • Floating connections for 4 actuators
  • Nominal current of each output: 8 A
  • Total current of the module: 32 A (4 x 8 A)
  • Device rating plate stored
Technical Specifications

Dimensions

Width53.6 mm
Height126.1 mm
Depth54 mm
Note on dimensionsThe depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Axioline F local bus

Number of interfaces2
Connection MethodBus base module
Transmission Speed100 Mbps

Module

Input address area0 Byte
Output address area1 Byte
Required parameter data 1 Byte
Required configuration data 6 Byte

Relay

Number of Outputs4 (floating)
Connection MethodPush-in connection
Connection technology2-conductor
Contact switching typeN/O contact
Switching currentmax. 8 A AC (cos phi = 1)
Switching currentFor DC see load limit curve, e.g., the following values:
Switching currentmax. 8 A DC (≤ 30 V, ohmic load)
Switching currentmax. 500 mA DC (110 V, ohmic load)
Switching currentmax. 250 mA DC (220 V DC, ohmic load)
Switching currentmax. 220 mA DC (125 V DC, L/R ≤ 50 ms, applications with UL approval)
Switching currentmax. 110 mA DC (250 V DC, L/R ≤ 50 ms, applications with UL approval)
Switching capacitymax. 2000 VA
Switching capacityFor DC see load limit curve, e.g., the following values:
Switching capacitymax. 240 W (30 V DC)
Switching capacitymax. 55 W (≥ 60 V DC)
Switching capacitymax. 25 W (125 V DC, 250 V DC, applications with UL approval)
Switching capacity in accordance with IEC 60947-5-16 A (120 V (AC15))
Switching capacity in accordance with IEC 60947-5-13 A (240 V (AC15))
Switching capacity in accordance with IEC 60947-5-10.22 A (125 V (DC13))
Switching capacity in accordance with IEC 60947-5-10.1 A (250 V (DC-13))
Switching frequencymax. 6 (per minute)
Mechanical service life10x 106 cycles

Product properties

Product familyAxioline F
Typeblock modular
Mounting Positionany (observe temperature and current derating)
Scope of deliveryincluding bus base module and Axioline F connectors

Insulation characteristics

Overvoltage categoryIII (EN 61010-2-201/UL 61010-2-201), up to 2000 m above sea levelII (EN 61010-2-201/UL 61010-2-201), up to 3000 m above sea level
Pollution degree2

Potentials: Axioline F local bus supply (UBus)

Supply Voltage5 V DC (via bus base module)
Current drawmax. 280 mA (all relays pick up)
Power consumptionmax. 1.4 W (all relays pick up)

Electrical isolation/isolation of the voltage ranges

Test voltage: Relay contact / logic4 kV
Test voltage: Relay contact / logic5 kV
Test voltage: Relay contact / functional ground4 kV
Test voltage: Relay contact / functional ground5 kV
Test voltage: Relay contact/relay contact (open contact)1 kV, 50 Hz, 1 min.
Test voltage: Relay contact/relay contact (adjacent male connectors)2.5 kV

Connection technology

Connection nameAxioline F connector
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30 K above the ambient temperature.

Conductor connection

Connection MethodPush-in connection
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm

Axioline F connector

Connection MethodPush-in connection
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30 K above the ambient temperature.
Conductor cross section, rigid0.2 mm² ... 1.5 mm²
Conductor cross section, flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 60 °C (max. 6 A/channel for wall mounting on horizontal DIN rail; max. 4 A/channel for any mounting position)
Ambient Temperature (Operation)-25 °C ... 50 °C (max. 8 A/channel for wall mounting on horizontal DIN rail; max. 6 A/channel for any mounting position)
Ambient Temperature (Operation)-25 °C ... 40 °C (max. 8 A/channel for any mounting position)
Degree of ProtectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

Standards and Regulations

Standards/specificationsIEC 61850-3

Mounting

Mounting TypeDIN rail mounting
Mounting Positionany (observe temperature and current derating)
Accessories

Why Proax for Phoenix Contact 2700608?

Proax is an authorized distributor of Phoenix Contact 2700608 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Available for order

Phoenix Contact Availability