Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
Weight
0.239 kg
This product is Not Cancellable/Not Returnable
Series AXL-F-DO

AXL F DO4/3 AC 1F - Digital module

Axioline F, Digital output module, Digital outputs: 4 (Triac outputs with zero voltage switch), 230 V AC, 2 A, connection technology: 3-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

  • 4 digital outputs
  • Connection of actuators in 2- and 3-conductor technology
  • Device rating plate stored
  • Diagnostic and status indicators
Technical Specifications

Dimensions

Width53.6 mm
Height126.1 mm
Depth54 mm
Note on dimensionsThe depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Axioline F local bus

Number of interfaces2
Connection MethodBus base module
Transmission Speed100 Mbps

Module

Input address area0 Byte
Output address area1 Byte
Required parameter data 1 Byte
Required configuration data 6 Byte

Digital:

Output nameDigital outputs
Connection MethodPush-in connection
Connection technology3-conductor
Number of Outputs4 (Triac outputs with zero voltage switch)
Protective circuitExternal protection required; I2t-value (a half-wave): 340 A2s
Output Voltage230 V AC
Maximum Output Current per module8 A (provide external protection)
Nominal Output Voltage230 V AC
Output voltage range24 V AC ... 230 V AC -20 % / +15 % (50/60 Hz)
Load min.5.1 kΩ (at 230 V)
Output voltage when switched offsee diagram
Nominal load, ohmicmax. 460 W (at nominal voltage)
Switching frequencymax. 100 per second (with ohmic load)
Reverse voltage resistance to short pulsesReverse voltage proof
Behavior with overloadOutput may be damaged
Signal delaymax. 10 ms (at 50 Hz)

Product properties

Product familyAxioline F
Typeblock modular
Mounting Positionany (observe temperature and current derating)
Scope of deliveryincluding bus base module and Axioline F connectors

Potentials: Axioline F local bus supply (UBus)

Supply Voltage5 V DC (via bus base module)
Current drawmax. 120 mA
Power consumptionmax. 600 mW

Potentials: Supply for digital output modules (UO)

Supply Voltage230 V AC
Supply Voltage Range12 V AC ... 253 V AC (including all tolerances, including ripple, 50 ... 60 Hz)
Current drawmax. 8 A (provide external protection)
Power consumptionmax. 2024 VA (of which 8 VA internal losses)
Protective circuitSurge protection; Varistor 275 V

Electrical isolation/isolation of the voltage ranges

Test voltage: I/Os / logic4 kV
Test voltage: I/Os / logic5 kV
Test voltage: I/O/functional ground4 kV
Test voltage: I/O/functional ground5 kV
Test voltage: I/O area AC / PE4 kV

Connection technology

Connection nameAxioline F connector
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30 K above the ambient temperature.

Conductor connection

Connection MethodPush-in connection
Conductor cross section rigid0.5 mm² ... 1.5 mm²
Conductor cross section flexible0.5 mm² ... 1.5 mm²
Conductor cross section AWG20 ... 16
Stripping length8 mm

Axioline F connector

Connection MethodPush-in connection
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.When selecting the cables, please note that in the case of a small conductor cross section and high current, the terminal point temperature may be up to 30 K above the ambient temperature.
Conductor cross section, rigid0.5 mm² ... 1.5 mm²
Conductor cross section, flexible0.5 mm² ... 1.5 mm²
Conductor cross section AWG20 ... 16
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 60 °C (max. 2 A/channel for wall mounting on horizontal DIN rail; max. 1 A/channel for any mounting position)
Ambient Temperature (Operation)-25 °C ... 50 °C (max. 2 A/channel for any mounting position)
Degree of ProtectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

Mounting

Mounting TypeDIN rail mounting
Mounting Positionany (observe temperature and current derating)
Accessories

Why Proax for Phoenix Contact 2702068?

Proax is an authorized distributor of Phoenix Contact 2702068 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Available for order

Phoenix Contact Availability