Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
AXL F DI8/2 24DC 1F
Weight
0.221 kg
This product is Not Cancellable/Not Returnable
Series AXL-F-DI

AXL F DI8/2 24DC 1F - Digital module

Axioline F, Digital input module, Digital inputs: 8, 24 V DC, connection technology: 2-conductor, corresponds to standard IEC 61850-3, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

  • 8 digital inputs according to EN 61131-2 type 1
  • Connection of sensors in 2-conductor technology
  • 24 V DC, 2.5 mA
  • Filter time of < 1 ms
  • Inputs are reverse polarity protected
  • Safe isolation in accordance with EN 61010-2-201/IEC 61010-2-201
  • Device rating plate stored
  • Diagnostic and status indicators
  • Meets the requirements of IEC 61850-3 and IEEE 1613
Technical Specifications

Dimensions

Width53.6 mm
Height126.1 mm
Depth54 mm
Note on dimensionsThe depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Axioline F local bus

Number of interfaces2
Connection MethodBus base module
Transmission Speed100 Mbps

Module

Input address area1 Byte
Output address area0 Byte
Required parameter data 3 Byte
Required configuration data 6 Byte

Digital:

Input nameDigital inputs
Description of the inputEN 61131-2 type 1
Number of Inputs8
Connection MethodPush-in connection
Connection technology2-conductor
Input Voltage24 V DC (Nominal voltage)
Input Voltagemax. 100 V DC
Input voltage range-100 V DC ... 100 V DC
Input voltage range "0" signal-5 V DC ... 5 V DC
Input voltage range "1" signal14.5 V DC ... 100 V DC
Nominal input voltage UIN24 V DC
Nominal input current at UIN2.5 mA
Input filter time< 1 ms
Protective circuitPolarity reversal protection of the inputs

Product properties

Product familyAxioline F
Typeblock modular
Mounting Positionany (no temperature derating)Nominal mounting position: wall mounting on horizontal DIN rail
Scope of deliveryincluding bus base module and Axioline F connectors
Special Propertiescorresponds to standard IEC 61850-3

Insulation characteristics

Overvoltage categoryIII (EN 61010-2-201/IEC 61010-2-201)
Pollution degree2

Potentials: Axioline F local bus supply (UBus)

Supply Voltage5 V DC (via bus base module)
Current drawmax. 120 mA
Power consumptionmax. 600 mW

Electrical isolation/isolation of the voltage ranges

Test voltage: I/Os / logic4 kV
Test voltage: I/Os / logic5 kV
Test voltage: I/O/functional ground4 kV
Test voltage: I/O/functional ground5 kV
Test voltage: I/O / I/O (adjacent connectors)2.5 kV
Test voltage: Logic/functional ground1 kV

Connection technology

Connection nameAxioline F connector
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.

Conductor connection

Connection MethodPush-in connection
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm

Axioline F connector

Connection MethodPush-in connection
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section, rigid0.2 mm² ... 1.5 mm²
Conductor cross section, flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 60 °C
Degree of ProtectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

Standards and Regulations

Standards/specificationsIEC 61850-3

Mounting

Mounting TypeDIN rail mounting
Mounting Positionany (no temperature derating)Nominal mounting position: wall mounting on horizontal DIN rail
Accessories

Why Proax for Phoenix Contact 2702783?

Proax is an authorized distributor of Phoenix Contact 2702783 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability