Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
AXL F DI16/1 DO8/2-2A 2H
Weight
0.213 kg
This product is Not Cancellable/Not Returnable
Series AXL-F-DI

AXL F DI16/1 DO8/2-2A 2H - Digital module

Axioline F, Digital I/O module, Digital inputs: 16, 24 V DC, connection technology: 1-conductor, Digital outputs: 8, 24 V DC, 2 A, connection technology: 2-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors

  • 16 digital inputs in accordance with EN 61131-2 type 1 and type 3
  • 24 V DC, 2.4 mA
  • Connection of sensors in 1-conductor technology
  • Filter times can be adjusted in three increments: < 100 µs, 1000 µs or 3000 µs
  • Maximum input frequency: 5 kHz
  • 8 digital outputs
  • 24 V DC, 2 A
  • Connection of actuators in 2-conductor technology
  • Minimum update time of < 100 μs
  • Device rating plate stored
Technical Specifications

Dimensions

Width35 mm
Height129.9 mm
Depth54 mm
Note on dimensionsThe depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).

Axioline F local bus

Number of interfaces2
Connection MethodBus base module
Transmission Speed100 Mbps

Module

ID code (hex)none
Input address area2 Byte
Output address area2 Byte
Required parameter data 3 Byte
Required configuration data 7 Byte

Digital:

Input nameDigital inputs
Description of the inputEN 61131-2 types 1 and 3
Number of Inputs16
Connection MethodPush-in connection
Connection technology1-conductor
Input voltage range "0" signal-3 V DC ... 5 V DC
Input voltage range "1" signal11 V DC ... 30 V DC
Nominal input voltage UIN24 V DC
Nominal input current at UIN2.4 mA
Input filter time3000 µs (Default)
Input filter time1000 µs
Input filter time< 100 µs
Protective circuitPolarity reversal protection of the inputs; parallel diode (30 V, 5 s)
Output nameDigital outputs
Connection MethodPush-in connection
Connection technology2-conductor
Number of Outputs8
Protective circuitShort-circuit protection, overload protection of the outputs; electronic
Output Voltage24 V DC
Limitation of the voltage induced on circuit interruption-25.8 V ... -15 V
Maximum Output Current per modulemax. 16 A (Provide external protection; if the total current of 8 A is exceeded, connect the supply at the power connector parallel via both terminal points.)
Nominal Output Voltage24 V DC
Load min.10 kΩ
Output voltage when switched offmax. 1 V
Output current when switched offmax. 300 µA
Nominal load, inductivemax. 48 VA (1.2 H, 12 Ω, at nominal load)
Nominal load, lampmax. 48 W (at nominal voltage)
Nominal load, ohmicmax. 48 W (12 Ω, at nominal load)
Switching frequencymax. 3000 per second (with at least 50 mA load current)
Switching frequencymax. 1 per second (with inductive load)
Switching frequencymax. 4 per second (with nominal lamp load)
Reverse voltage resistance to short pulseslimited protection up to 0.5 A for 1 s
Behavior with overloadShutdown with automatic restart
Behavior with inductive overloadOutput can be destroyed
Signal delaymax. 150 µs (when switched on)
Signal delaymax. 150 µs (when switched off, with at least 50 mA load current)
Overcurrent shut-downas of 2.1 A
Output current with ground connection interrupt when switched off< 1 mA

Product properties

Product familyAxioline F
Typeblock modular
Mounting Positionany (no temperature derating)
Scope of deliveryincluding bus base module and Axioline F connectors

Insulation characteristics

Overvoltage categoryII (IEC 60664-1, EN 60664-1)
Pollution degree2 (IEC 60664-1, EN 60664-1)

Potentials: Axioline F local bus supply (UBus)

Supply Voltage5 V DC (via bus base module)
Current drawmax. 120 mA (up to HW 01)
Current drawmax. 60 mA (from HW 02)
Power consumptionmax. 600 mW (up to HW 01)
Power consumptionmax. 300 mW (from HW 02)

Potentials: Supply for digital input and output modules (UIO)

Supply Voltage24 V DC
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 16 A (Provide external protection; if the total current of 8 A is exceeded, connect the supply at the power connector parallel via both terminal points.)
Power consumptionmax. 480 W (of which 6.4 W internal losses)
Protective circuitSurge protection; electronic (35 V, 0.5 s)
Protective circuitReverse polarity protection; parallel diode; with external 5 A fuse (only for commissioning)

Electrical isolation/isolation of the voltage ranges

Test voltage: 5 V supply of the local bus (UBus) / 24 V supply (I/Os)500 V AC, 50 Hz, 1 min.
Test voltage: 5 V supply of the local bus (UBus) / functional ground500 V AC, 50 Hz, 1 min.
Test voltage: 24 V supply (I/O) / functional ground500 V AC, 50 Hz, 1 min.

Connection technology

Connection nameAxioline F connectors (digital inputs)
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.

Conductor connection

Connection MethodPush-in connection
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm

Axioline F connectors (digital inputs)

Connection MethodPush-in connection
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section, rigid0.2 mm² ... 1.5 mm²
Conductor cross section, flexible0.2 mm² ... 1.5 mm²
Conductor cross section AWG24 ... 16
Stripping length8 mm

Axioline F connectors (supply and digital outputs)

Connection MethodPush-in connection
Note on the connection methodPlease observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual.
Conductor cross section, rigid0.5 mm² ... 1.5 mm²
Conductor cross section, flexible0.5 mm² ... 1.5 mm²
Conductor cross section AWG20 ... 16
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 60 °C
Degree of ProtectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)

Standards and Regulations

Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

Mounting

Mounting TypeDIN rail mounting
Mounting Positionany (no temperature derating)
Accessories

Why Proax for Phoenix Contact 2702291?

Proax is an authorized distributor of Phoenix Contact 2702291 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability