Official Distributor
SKU
MPN
AXL F DI8/2 110/220DC 1F
Weight
0.219 kg
Series AXL-F-DI
AXL F DI8/2 110/220DC 1F - Digital module
Axioline F, Digital input module, Digital inputs: 8, 110 V DC / 220 V DC, connection technology: 2-conductor, corresponds to standard IEC 61850-3, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors
- 8 digital inputs according to EN 61131-2 type 1
- Connection of sensors in 2-conductor technology
- 110 V DC / 220 V DC, 1.5 mA
- Filter time of < 1 ms
- Inputs are reverse polarity protected
- Safe isolation in accordance with EN 61010-2-201/IEC 61010-2-201
- Device rating plate stored
- Diagnostic and status indicators
- Meets the requirements of IEC 61850-3 and IEEE 1613
Technical Specifications
Dimensions
Width | 53.6 mm |
Height | 126.1 mm |
Depth | 54 mm |
Note on dimensions | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
Axioline F local bus
Number of interfaces | 2 |
Connection Method | Bus base module |
Transmission Speed | 100 Mbps |
Module
Input address area | 1 Byte |
Output address area | 0 Byte |
Required parameter data | 3 Byte |
Required configuration data | 6 Byte |
Digital:
Input name | Digital inputs |
Description of the input | EN 61131-2 type 1 |
Number of Inputs | 8 |
Connection Method | Push-in connection |
Connection technology | 2-conductor |
Input Voltage | 110 V DC (Nominal voltage) |
Input Voltage | 220 V DC (Nominal voltage) |
Input Voltage | max. 300 V DC |
Input voltage range | -300 V DC ... 300 V DC |
Input voltage range "0" signal | -41 V DC ... 41 V DC |
Input voltage range "1" signal | 88 V DC ... 300 V DC |
Nominal input voltage UIN | 110 V DC |
Nominal input voltage UIN | 220 V DC |
Nominal input current at UIN | 1.5 mA |
Input filter time | < 1 ms |
Protective circuit | Polarity reversal protection of the inputs |
Product properties
Product family | Axioline F |
Type | block modular |
Mounting Position | any (observe temperature and voltage derating);Nominal mounting position: wall mounting on horizontal DIN rail |
Scope of delivery | including bus base module and Axioline F connectors |
Special Properties | corresponds to standard IEC 61850-3 |
Insulation characteristics
Overvoltage category | III (EN 61010-2-201/UL 61010-2-201), up to 2000 m above sea levelII (EN 61010-2-201/UL 61010-2-201), up to 3000 m above sea level |
Pollution degree | 2 |
Potentials: Axioline F local bus supply (UBus)
Supply Voltage | 5 V DC (via bus base module) |
Current draw | max. 120 mA |
Power consumption | max. 600 mW |
Electrical isolation/isolation of the voltage ranges
Test voltage: I/Os / logic | 4 kV |
Test voltage: I/Os / logic | 5 kV |
Test voltage: I/O/functional ground | 4 kV |
Test voltage: I/O/functional ground | 5 kV |
Test voltage: I/O / I/O (adjacent connectors) | 2.5 kV |
Test voltage: Logic/functional ground | 1 kV |
Connection technology
Connection name | Axioline F connector |
Note on the connection method | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
Conductor connection
Connection Method | Push-in connection |
Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
Conductor cross section AWG | 24 ... 16 |
Stripping length | 8 mm |
Axioline F connector
Connection Method | Push-in connection |
Note on the connection method | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² |
Conductor cross section AWG | 24 ... 16 |
Stripping length | 8 mm |
Ambient conditions
Ambient Temperature (Operation) | -25 °C ... 60 °C (Mounting position: wall mounting on horizontal DIN rail, input voltage: max. 264 V) |
Ambient Temperature (Operation) | -25 °C ... 55 °C (Mounting position: any) |
Degree of Protection | IP20 |
Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Standards and Regulations
Standards/specifications | IEC 61850-3 |
Mounting
Mounting Type | DIN rail mounting |
Mounting Position | any (observe temperature and voltage derating);Nominal mounting position: wall mounting on horizontal DIN rail |
Accessories
Why Proax for Phoenix Contact 2700684?
Proax is an authorized distributor of Phoenix Contact 2700684 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended
- 2701916 - Axioline F, Digital I/O module, Digital inputs: 8, 24 V DC, connection technology: 1-conductor, Digital outputs: 8, 24 V DC, 500 mA, connection technology: 1-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors
- 2702071 - Axioline F, Digital I/O module, Digital inputs: 8, 24 V DC, connection technology: 3-conductor, Digital outputs: 8, 24 V DC, 500 mA, connection technology: 3-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors
- 2702017 - Axioline F, Digital I/O module, Digital inputs: 8, 24 V DC, connection technology: 1-conductor, Digital outputs: 8, 24 V DC, 500 mA, connection technology: 1-conductor, Extreme conditions version, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors
- 2702106 - Axioline F, Digital I/O module, Digital inputs: 16, 24 V DC, connection technology: 1-conductor, Digital outputs: 16, 24 V DC, 500 mA, connection technology: 1-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors
- 2702291 - Axioline F, Digital I/O module, Digital inputs: 16, 24 V DC, connection technology: 1-conductor, Digital outputs: 8, 24 V DC, 2 A, connection technology: 2-conductor, transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors