Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2908064
AllMeasurement & MonitoringSignal conditionerActive output signal conditioners
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
MACX MCR-IDS-I-I-SP
Weight
0.169 kg

MACX MCR-IDS-I-I-SP - Output signal conditioner

Output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA ... 20 mA signals to a load in the safe area. 3-way electrical isolation, line fault detection (can be switched off via DIP switch), SIL 2 (SC3) in accordance with IEC 61508, Push-in connection.

Technical Specifications

Product properties

Product familyMACX Analog
No. of channels1
TypeSignal conditioners with SIL functional safety
ConfigurationDIP switches

Functionality

ConfigurationDIP switches

Electrical properties

Electrical isolation3-way isolation
Signal transmission behaviorIn = Out
Step response (10-90%)< 140 µs (for 4 mA ... 20 mA step)
Maximum temperature coefficient0.01 %/K
Temperature coefficient, typical≤ 0.005 %/K
Maximum transmission error0.1 % (of final value)
Transmission error, typical≤ 0.05 % (of final value)

Electrical isolation

Overvoltage categoryII
Pollution degree2

Electrical isolation Input/output IEC/EN 61010-1

Standards/regulationsIEC/EN 61010-1
Rated Insulation Voltage300 Vrms
Test voltage2.5 kV AC (50 Hz, 60 s)
InsulationSafe isolation

Electrical isolation Input/power supply IEC/EN 61010-1

Standards/regulationsIEC/EN 61010-1
Rated Insulation Voltage50 Vrms
Test voltage1.5 kV AC (50 Hz, 60 s)
InsulationBasic insulation

Electrical isolation Output/supply IEC/EN 61010-1

Standards/regulationsIEC/EN 61010-1
Rated Insulation Voltage300 Vrms
Test voltage2.5 kV AC (50 Hz, 60 s)
InsulationSafe isolation

Supply

Nominal Supply Voltage24 V DC -20 % ... +25 %
Supply Voltage Range19.2 V DC ... 30 V DC
Max. current consumption< 45 mA (24 V DC / 20 mA)
Power dissipation< 0.8 W (24 V DC / 20 mA)
Power consumption≤ 1.1 W (24 V DC / 20 mA)

Signal: Current

Current Input Signal0 mA ... 20 mA (Function (short-circuit detection off))
Current Input Signal0.2 mA ... 20 mA (Function (short-circuit detection on))
Current Input Signal4 mA ... 20 mA (Safety)
Current Input Signal0 mA ... 24 mA (Underload/overload range)
Input Current≤ 30 mA
Input Impedance> 1 MΩ (If there is a line fault)
Line fault detection> 0.2 mA (Response threshold of input current)
Voltage drop< 2.4 V (at 20 mA)
Number of Outputs1
Current Output Signal0 mA ... 20 mA (Function (short-circuit detection off))
Current Output Signal0.2 mA ... 20 mA (Function (short-circuit detection on))
Current Output Signal4 mA ... 20 mA (Safety)
Current Output Signal0 mA ... 24 mA (Underload/overload range)
Load100 Ω ... 700 Ω (20 mA (short-circuit detection on))
Load100 Ω ... 650 Ω (20.5 mA (short-circuit detection on))
Load100 Ω ... 500 Ω (24 mA (short-circuit detection on))
Load0 Ω ... 700 Ω (20 mA (short-circuit detection off))
Load0 Ω ... 650 Ω (20.5 mA (short-circuit detection off))
Load0 Ω ... 500 Ω (24 mA (short-circuit detection off))
Output ripple< 20 mVrms
Non-load voltage≤ 27 V
Line fault detection> 10 kΩ (Line break)
Line fault detection< 50 Ω (Short circuit)

Connection data

Connection MethodPush-in connection
Stripping length10 mm
Conductor cross section rigid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section flexible (2 conductors with same cross section)0.25 mm² ... 0.34 mm² (TWIN ferrule without plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section)0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve)
Conductor cross section AWG24 ... 14
Conductor cross section AWG24 ... 22 (TWIN ferrule without plastic sleeve)
Conductor cross section AWG20 ... 16 (TWIN ferrule with plastic sleeve)

Ex data

Ex installation (EPL)Gc
Ex installation (EPL)Div. 2

Data communication (bypass)

HART FunctionYes
Protocols SupportedHART-transparent

Signaling

Status displayGreen LED (supply voltage)

Dimensions

Width12.5 mm
Height107.9 mm
Depth113.7 mm
Depth NS 35/7,5114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Material specifications

Colorgray (RAL 7042)
Flammability rating according to UL 94V0 (Housing)
Housing MaterialPA 6.6-FR

Ambient conditions

Degree of ProtectionIP20
Ambient Temperature (Operation)-40 °C ... 70 °C (Any mounting position)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)

Altitude range (≤ 2000 m (Ex))

DescriptionEx applications
Altitude≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient Temperature (Operation)-40 °C ... 70 °C
Rated Insulation Voltage320 V (Power supply, input / output)

Altitude range (≤ 3000 m (Ex))

DescriptionEx applications
Height Range> 2000 m ... 3000 m
Ambient Temperature (Operation)-40 °C ... 60 °C
Rated Insulation Voltage190 V (Power supply, input / output)

Altitude range (≤ 4000 m (Ex))

DescriptionEx applications
Height Range> 3000 m ... 4000 m
Ambient Temperature (Operation)-40 °C ... 55 °C
Rated Insulation Voltage63 V (Power supply, input / output)

Altitude range (≤ 5000 m (Ex))

DescriptionEx applications
Height Range> 4000 m ... 5000 m
Ambient Temperature (Operation)-40 °C ... 45 °C
Rated Insulation Voltage63 V (Power supply, input / output)

Altitude range (≤ 2000 m)

DescriptionNon-Ex applications (EN 61010-1)
Altitude≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient Temperature (Operation)-40 °C ... 70 °C
Rated Insulation Voltage300 V (Power supply, input / output)

Altitude range (≤ 3000 m)

DescriptionNon-Ex applications (EN 61010-1)
Height Range> 2000 m ... 3000 m
Ambient Temperature (Operation)-40 °C ... 60 °C
Rated Insulation Voltage150 V (Power supply, input / output)

Altitude range (≤ 4000 m)

DescriptionNon-Ex applications (EN 61010-1)
Height Range> 3000 m ... 4000 m
Ambient Temperature (Operation)-40 °C ... 55 °C
Rated Insulation Voltage150 V (Power supply, input / output)

Altitude range (≤ 5000 m)

DescriptionNon-Ex applications (EN 61010-1)
Height Range> 4000 m ... 5000 m
Ambient Temperature (Operation)-40 °C ... 45 °C
Rated Insulation Voltage150 V (Power supply, input / output)

CE

CertificateCE-compliant
Noteand EN 61326

ATEX

Identification II 3 G Ex ec IIC T4 Gc
CertificateBVS 20 ATEX E 003 X

UKCA Ex (UKEX)

Identification II 3 G Ex ec IIC T4 Gc
CertificatePxCIF21UKEx2908065X

IECEx

IdentificationEx ec IIC T4 Gc
CertificateIECEx BVS 20.0003X

CCC / China-Ex

IdentificationEx ec IIC T4 Gc
Certificate2021122304114079

UL, USA/Canada

IdentificationUL 61010 Listed
IdentificationClass I, Div. 2, Groups A, B, C, D T4
IdentificationClass I, Zone 2, Group IIC T4

Shipbuilding approval

CertificateDNV GL TAA00000AG

Safety Integrity Level (SIL, IEC 61508)

Identification2

Systematic Capability

Identification3

INMETRO

IdentificationEx ec IIC T4 Gc
CertificateDNV 21.0092 X

EAC

Identification2Ex e IIC T4 Gc X
CertificateRU C-DE.HB49.B.00145/21

DNV GL data

TemperatureB
HumidityB
VibrationA
EMCB
EnclosureRequired protection according to the Rules shall be provided upon installation on board

EMC data

Noise immunityEN 61000-6-2
NoteWhen being exposed to interference, there may be minimal deviations.
Electromagnetic compatibilityConformance with EMC directive
Noise emissionEN 61000-6-4

Standards and Regulations

Electrical isolation3-way isolation

GB Standard

Standards/regulationsGB/T 3836.1
Standards/regulationsGB/T 3836.3

Mounting

Mounting TypeDIN rail mounting
Accessories
  • Phoenix Contact2695439
    2695439
    ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rail in accordance with EN 60715
  • Phoenix Contact2865625
    2865625
    Power and error message module - MACX MCR-PTB
  • Phoenix Contact2924184
    2924184
    MACX MCR-PTB-SP - Power and fault signaling module with Push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector
  • Phoenix Contact2902932
    2902932
    TC-D37SUB-AIO16-EX-PS-UNI - Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection), with HART multiplexer connection
  • Phoenix Contact2924854
    2924854
    TC-D37SUB-ADIO16-EX-P-UNI - Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection)
  • Phoenix Contact0201663
    0201663
    MPS-IH WH - Insulating sleeve, color: white
  • Phoenix Contact0201676
    0201676
    MPS-IH RD - Insulating sleeve, color: red
  • Phoenix Contact0201689
    0201689
    MPS-IH BU - Insulating sleeve, color: blue
  • Phoenix Contact0201692
    0201692
    MPS-IH YE - Insulating sleeve, color: yellow
  • Phoenix Contact0201702
    0201702
    MPS-IH GN - Insulating sleeve, color: green
  • Phoenix Contact0201728
    0201728
    MPS-IH GY - Insulating sleeve, color: gray
  • Phoenix Contact0201731
    0201731
    MPS-IH BK - Insulating sleeve, color: black
  • Phoenix Contact0201744
    0201744
    Test plugs - MPS-MT
  • Phoenix Contact0819291
    0819291
    0819291 -
  • Phoenix Contact0822602
    0822602
    0822602 -
  • Phoenix Contact0828094
    0828094
    0828094 -
  • Phoenix Contact0828789
    0828789
    0828789 -
  • Phoenix Contact0828871
    0828871
    0828871 -
  • Phoenix Contact0828872
    0828872
    0828872 -
  • Phoenix Contact0831705
    0831705
    0831705 -
  • Phoenix Contact0831732
    0831732
    0831732 -

Why Proax for Phoenix Contact 2908064?

Proax is an authorized distributor of Phoenix Contact 2908064 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended
  • Phoenix Contact2908063
    2908063
    Output signal conditioner - MACX MCR-IDS-I-I
  • Phoenix Contact2905680
    2905680
    MACX MCR-I20 - Connection terminal block for current signals, +20 mA ... -20 mA, for safe switching of limit values, in combination with MACX ...-T-UI... temperature transducers.
  • Phoenix Contact2924993
    2924993
    MACX MCR-CJC - Plug for cold junction compensation for thermocouples, for safe switching of limit values, in combination with MACX ...-T-UI... temperature transducers.
  • Phoenix Contact1145365
    1145365
    Temperature measuring transducer - MACX MCR-EX-1TS-I-OLP
  • Phoenix Contact2925002
    2925002
    MACX MCR-EX-CJC - Plug for cold junction compensation for thermocouples, for safe switching of limit values, in combination with MACX ...EX-T-UI... temperature transducers.
  • Phoenix Contact2904970
    2904970
    Dummy - MACX MCR-EX-DUMMY-ISOLATOR
  • Phoenix Contact2905846
    2905846
    Dummy - MACX MCR-EX-DUMMY-ISOLATOR-SP
  • Phoenix Contact2865421
    2865421
    Output signal conditioner - MACX MCR-EX-IDS-2I-2I
  • Phoenix Contact2908060
    2908060
    Output signal conditioner - MACX MCR-EX-IDS-I-I
  • Phoenix Contact2908062
    2908062
    MACX MCR-EX-IDS-I-I-SP - Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals with intrinsic safety to a load in the Ex area. 3-way electrical isolation, line fault detection (can be switched off via DIP switch), SIL 2 (SC3) in accordance with IEC 61508, Push-in connection.
  • Phoenix Contact2905679
    2905679
    MACX MCR-EX-I20 - Connection terminal block for current signals +20 mA ...-20 mA for safe switching of limit values, in combination with MACX...EX-T-UI... temperature transducers.
  • Phoenix Contact2865405
    2865405
    MACX MCR-EX-SL-IDSI-I, Ex i output signal conditioner, HART Isolates and sends intrinsically safe 0/4-20 mA signals to a load (I/P converters, control valves, displays) in Ex areas. Electrical 3-way isolation, wire break recognition, SIL 2 in accordance with IEC 61508.
  • Phoenix Contact2924032
    2924032
    MACX MCR-EX-SL-IDSI-I-SP, Ex i output signal conditioner, HART. Isolates and sends intrinsically safe 0/4-20 mA signals to a load (I/P converters, control valves, displays) in Ex areas. Electrical 3-way isolation, wire break recognition, SIL 2 in accordance with IEC 61508, spring-cage connection.
  • Phoenix Contact2907404
    2907404
    MACX MCR-EX-SL-NAM-HO - Ex i NAMUR signal conditioners. For operating Ex i proximity sensors and switches in hazardous areas. Passive transistor output (resistive, Honeywell-compatible), line fault transparency, up to SIL 2 according to IEC 61508; screw connection.
  • Phoenix Contact2907405
    2907405
    MACX MCR-EX-SL-NAM-HO-SP - Ex i NAMUR signal conditioners. For operating Ex i proximity sensors and switches in hazardous areas. Passive transistor output (resistive, Honeywell-compatible), line fault transparency, up to SIL 2 according to IEC 61508; Push-in connection.
  • Phoenix Contact2865450
    2865450
    MACX MCR-EX-SL-NAM-2RO - Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2924061
    2924061
    MACX MCR-EX-SL-NAM-2RO-SP - Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2865463
    2865463
    MACX MCR-EX-SL-NAM-2T - Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2924074
    2924074
    Ex i NAMUR isolating amplifier for operating proximity sensors and switches in the Ex area. The signals are transmitted via 2 transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2866006
    2866006
    MACX MCR-EX-SL-NAM-NAM - Ex i NAMUR signal conditioner for operating Ex i proximity sensors and switches in the Ex area. Passive transistor output (resistive in accordance with EN 60947-5-6), line fault transparency, up to SIL 2 in accordance with IEC 61508, screw connection

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability