Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2865421
AllMeasurement & MonitoringSignal conditionerActive output signal conditioners
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
MACX MCR-EX-IDS-2I-2I
Weight
0.187 kg
This product is Not Cancellable/Not Returnable

MACX MCR-EX-IDS-2I-2I - Output signal conditioner

2-channel Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals with intrinsic safety to a load in the Ex area. 4-way electrical isolation, line fault detection, SIL 2 (SC3) in accordance with IEC 61508, screw connection.

Technical Specifications

Product properties

Product familyMACX Analog
No. of channels2
TypeEx i signal conditioners with SIL functional safety

Electrical properties

Electrical isolation4-way isolation
Signal transmission behaviorIn = Out
Step response (10-90%)< 140 µs (for 4 mA ... 20 mA step)
Maximum temperature coefficient0.01 %/K
Temperature coefficient, typical≤ 0.005 %/K
Maximum transmission error0.1 % (of final value)
Transmission error, typical≤ 0.05 % (of final value)

Electrical isolation

Overvoltage categoryII
Pollution degree2

Electrical isolation Input/output IEC/EN 61010-1

Standards/regulationsIEC/EN 61010-1
Rated Insulation Voltage300 Vrms
Test voltage2.5 kV AC (50 Hz, 60 s)
InsulationSafe isolation

Electrical isolation Input/power supply IEC/EN 61010-1

Standards/regulationsIEC/EN 61010-1
Rated Insulation Voltage50 Vrms
Test voltage1.5 kV AC (50 Hz, 60 s)
InsulationBasic insulation

Electrical isolation Output/supply IEC/EN 61010-1

Standards/regulationsIEC/EN 61010-1
Rated Insulation Voltage300 Vrms
Test voltage2.5 kV AC (50 Hz, 60 s)
InsulationSafe isolation

Electrical isolation Input 1/input 2, output 1/output 2

Test voltage1.5 kV AC (50 Hz, 60 s)

Electrical isolation Output/input IEC/EN 60079-11

Standards/regulationsIEC/EN 60079-11
Rated Insulation Voltage375 VPP

Electrical isolation Output/supply IEC/EN 60079-11

Standards/regulationsIEC/EN 60079-11
Rated Insulation Voltage375 VPP

Electrical isolation Output 1/output 2 IEC/EN 60079-11

Standards/regulationsIEC/EN 60079-11
Rated Insulation Voltage60 VPP

Supply

Nominal Supply Voltage24 V DC -20 % ... +25 %
Supply Voltage Range19.2 V DC ... 30 V DC
Max. current consumption< 85 mA (24 V DC / 20 mA)
Power dissipation< 1.4 W (24 V DC / 20 mA)
Power consumption≤ 2 W (24 V DC / 20 mA)

Signal: Current

Current Input Signal0.2 mA ... 20 mA (Function)
Current Input Signal4 mA ... 20 mA (Safety)
Current Input Signal0 mA ... 24 mA (Underload/overload range)
Input Current≤ 30 mA
Input Impedance> 1 MΩ (If there is a line fault)
Line fault detection> 0.2 mA (Response threshold of input current)
Voltage drop< 2.4 V (20 mA)
Output descriptionintrinsically safe
Current Output Signal0.2 mA ... 20 mA (Function)
Current Output Signal4 mA ... 20 mA (Safety)
Current Output Signal0 mA ... 24 mA (Underload/overload range)
Load100 Ω ... 700 Ω (20 mA)
Load100 Ω ... 650 Ω (20.5 mA)
Load100 Ω ... 500 Ω (24 mA)
Output ripple< 20 mVrms
Non-load voltage≤ 27 V
Line fault detection> 10 kΩ (Line break)
Line fault detection< 50 Ω (Short circuit)

Connection data

Connection MethodScrew connection
Stripping length7 mm
Screw threadM3
Conductor cross section rigid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG24 ... 14
Tightening torque0.5 Nm ... 0.6 Nm

COMBICON connection

Max. diameter2 mm

Ex data

Ex installation (EPL)Gc
Ex installation (EPL)Div. 2
Ex i circuits (EPL)Ga
Ex i circuits (EPL)Da
Ex i circuits (EPL)Ma
Ex i circuits (EPL)Div. 1

Safety data

Max. internal inductance Linegligible
Max. internal capacitance Cinegligible
Max. output voltage Uo25.2 V
Max. output current Io93 mA
Max. output power Po586 mW
Safety-related maximum voltage Um253 V AC
Safety-related maximum voltage Um125 V DC
IIA (simple circuit): Max. external inductivity Lo / Max. external capacitance Co10 mH / 2.9 µF
IIB (simple circuit): Max. external inductivity Lo / Max. external capacitance Co4 mH / 817 nF
IIC (simple circuit): Max. external inductivity Lo / Max. external capacitance Co2 mH / 104 nF
IIA (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co10 mH / 587 nF, 1 mH / 627 nF, 500 µH / 717 nF, 200 µH / 907 nF, 100 µH / 1.1 µF
IIB (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co4 mH / 367 nF, 1 mH / 427 nF, 500 µH / 507 nF, 200 µH / 657 nF, 100 µH / 817 nF
IIC (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co2 mH / 46 nF, 1 mH / 60 nF, 500 µH / 77 nF, 200 µH / 104 nF

Data communication (bypass)

HART FunctionYes
Protocols SupportedHART-transparent

Signaling

Status displayGreen LED (supply voltage)

Dimensions

Width12.5 mm
Height112.5 mm
Depth113.7 mm
Depth NS 35/7,5114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)

Material specifications

Colorgray (RAL 7042)
Flammability rating according to UL 94V0 (Housing)
Housing MaterialPA 6.6-FR

Ambient conditions

Degree of ProtectionIP20
Ambient Temperature (Operation)-40 °C ... 70 °C (Any mounting position)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)

Altitude range (≤ 2000 m (Ex))

DescriptionEx applications
Altitude≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient Temperature (Operation)-40 °C ... 70 °C
Safety-related maximum voltage Um253 V AC
Safety-related maximum voltage Um125 V DC
Rated Insulation Voltage320 V (Power supply, input / output)

Altitude range (≤ 3000 m (Ex))

DescriptionEx applications
Height Range> 2000 m ... 3000 m
Ambient Temperature (Operation)-40 °C ... 60 °C
Safety-related maximum voltage Um190 V AC
Safety-related maximum voltage Um110 V DC
Rated Insulation Voltage190 V (Power supply, input / output)

Altitude range (≤ 4000 m (Ex))

DescriptionEx applications
Height Range> 3000 m ... 4000 m
Ambient Temperature (Operation)-40 °C ... 55 °C
Safety-related maximum voltage Um60 V AC
Safety-related maximum voltage Um60 V DC
Rated Insulation Voltage63 V (Power supply, input / output)

Altitude range (≤ 5000 m (Ex))

DescriptionEx applications
Height Range> 4000 m ... 5000 m
Ambient Temperature (Operation)-40 °C ... 45 °C
Safety-related maximum voltage Um60 V AC
Safety-related maximum voltage Um60 V DC
Rated Insulation Voltage63 V (Power supply, input / output)

Altitude range (≤ 2000 m)

DescriptionNon-Ex applications (EN 61010-1)
Altitude≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.)
Ambient Temperature (Operation)-40 °C ... 70 °C
Rated Insulation Voltage300 V (Power supply, input / output)

Altitude range (≤ 3000 m)

DescriptionNon-Ex applications (EN 61010-1)
Height Range> 2000 m ... 3000 m
Ambient Temperature (Operation)-40 °C ... 60 °C
Rated Insulation Voltage150 V (Power supply, input / output)

Altitude range (≤ 4000 m)

DescriptionNon-Ex applications (EN 61010-1)
Height Range> 3000 m ... 4000 m
Ambient Temperature (Operation)-40 °C ... 55 °C
Rated Insulation Voltage150 V (Power supply, input / output)

Altitude range (≤ 5000 m)

DescriptionNon-Ex applications (EN 61010-1)
Height Range> 4000 m ... 5000 m
Ambient Temperature (Operation)-40 °C ... 45 °C
Rated Insulation Voltage150 V (Power supply, input / output)

CE

CertificateCE-compliant
Noteand EN 61326

ATEX

Identification I (M1) [Ex ia Ma] I
Identification II (1) G [Ex ia Ga] IIC
Identification II (1) D [Ex ia Da] IIIC
Identification II 3(1) G Ex ec [ia Ga] IIC T4 Gc
CertificateBVS 20 ATEX E 004 X

IECEx

Identification[Ex ia Ma] I
Identification[Ex ia Ga] IIC
Identification[Ex ia Da] IIIC
IdentificationEx ec [ia Ga] IIC T4 Gc
CertificateIECEx BVS 20.0003X

CCC / China-Ex

Identification[Ex ia Ga] IIC
Identification[Ex ia Da] IIIC
IdentificationEx ec [ia Ga] IIC T4 Gc
Certificate2021122316114080

UL, USA/Canada

IdentificationUL 61010 Listed
IdentificationClass I Div 2; IS for Class I, II, III Div 1
Certificate, C.D.-No 83104549

Shipbuilding approval

CertificateDNV GL TAA00000AG

Safety Integrity Level (SIL, IEC 61508)

Identification3

Systematic Capability

Identification3

INMETRO

Identification[Ex ia Ga] IIC
Identification[Ex ia Da] IIIC
IdentificationEx ec [ia Ga] IIC T4 Gc
Identification[Ex ia Ma] I
CertificateDNV 21.0092 X

DNV GL data

TemperatureB
HumidityB
VibrationA
EMCB
EnclosureRequired protection according to the Rules shall be provided upon installation on board

EMC data

Noise immunityEN 61000-6-2
NoteWhen being exposed to interference, there may be minimal deviations.
Electromagnetic compatibilityConformance with EMC directive
Noise emissionEN 61000-6-4

Standards and Regulations

Electrical isolation4-way isolation

GB Standard

Standards/regulationsGB/T 3836.1
Standards/regulationsGB/T 3836.3
Standards/regulationsGB/T 3836.4

Mounting

Mounting TypeDIN rail mounting
Accessories
  • Phoenix Contact2695439
    2695439
    ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rail in accordance with EN 60715
  • Phoenix Contact2865625
    2865625
    Power and error message module - MACX MCR-PTB
  • Phoenix Contact2924184
    2924184
    MACX MCR-PTB-SP - Power and fault signaling module with Push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector
  • Phoenix Contact2902932
    2902932
    TC-D37SUB-AIO16-EX-PS-UNI - Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection), with HART multiplexer connection
  • Phoenix Contact2924854
    2924854
    TC-D37SUB-ADIO16-EX-P-UNI - Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection)
  • Phoenix Contact0201663
    0201663
    MPS-IH WH - Insulating sleeve, color: white
  • Phoenix Contact0201676
    0201676
    MPS-IH RD - Insulating sleeve, color: red
  • Phoenix Contact0201689
    0201689
    MPS-IH BU - Insulating sleeve, color: blue
  • Phoenix Contact0201692
    0201692
    MPS-IH YE - Insulating sleeve, color: yellow
  • Phoenix Contact0201702
    0201702
    MPS-IH GN - Insulating sleeve, color: green
  • Phoenix Contact0201728
    0201728
    MPS-IH GY - Insulating sleeve, color: gray
  • Phoenix Contact0201731
    0201731
    MPS-IH BK - Insulating sleeve, color: black
  • Phoenix Contact0201744
    0201744
    Test plugs - MPS-MT
  • Phoenix Contact0819291
    0819291
    0819291 -
  • Phoenix Contact0822602
    0822602
    0822602 -
  • Phoenix Contact0828094
    0828094
    0828094 -
  • Phoenix Contact0828789
    0828789
    0828789 -
  • Phoenix Contact0828871
    0828871
    0828871 -
  • Phoenix Contact0828872
    0828872
    0828872 -
  • Phoenix Contact0831705
    0831705
    0831705 -
  • Phoenix Contact0831732
    0831732
    0831732 -

Why Proax for Phoenix Contact 2865421?

Proax is an authorized distributor of Phoenix Contact 2865421 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended
  • Phoenix Contact2908062
    2908062
    MACX MCR-EX-IDS-I-I-SP - Ex i output signal conditioner, HART-transparent. Isolates and transmits 0/4 mA … 20 mA signals with intrinsic safety to a load in the Ex area. 3-way electrical isolation, line fault detection (can be switched off via DIP switch), SIL 2 (SC3) in accordance with IEC 61508, Push-in connection.
  • Phoenix Contact2908060
    2908060
    Output signal conditioner - MACX MCR-EX-IDS-I-I
  • Phoenix Contact2905679
    2905679
    MACX MCR-EX-I20 - Connection terminal block for current signals +20 mA ...-20 mA for safe switching of limit values, in combination with MACX...EX-T-UI... temperature transducers.
  • Phoenix Contact2925002
    2925002
    MACX MCR-EX-CJC - Plug for cold junction compensation for thermocouples, for safe switching of limit values, in combination with MACX ...EX-T-UI... temperature transducers.
  • Phoenix Contact2904970
    2904970
    Dummy - MACX MCR-EX-DUMMY-ISOLATOR
  • Phoenix Contact2905846
    2905846
    Dummy - MACX MCR-EX-DUMMY-ISOLATOR-SP
  • Phoenix Contact1050222
    1050222
    Temperature measuring transducer - MACX MCR-EX-RTD-I
  • Phoenix Contact1050252
    1050252
    Temperature measuring transducer - MACX MCR-EX-RTD-I-SP
  • Phoenix Contact1050233
    1050233
    Temperature measuring transducer - MACX MCR-EX-TC-I
  • Phoenix Contact2865984
    2865984
    2-channel Ex i NAMUR signal conditioner with wide range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeover contact available. Fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2924249
    2924249
    MACX MCR-EX-SL-2NAM-R-UP-SP - 2-channel Ex i NAMUR signal conditioner with wide range power supply for proximity sensors and switches. In terms of signal output, for each channel there is a relay with a changeover contact available. Fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2865476
    2865476
    Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2924087
    2924087
    MACX MCR-EX-SL-2NAM-RO-SP - Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2865489
    2865489
    MACX MCR-EX-SL-2NAM-T - Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2924090
    2924090
    MACX MCR-EX-SL-2NAM-T-SP - Ex i NAMUR isolating amplifier, 2-channel. For operating proximity sensors and switches in Ex areas. The signals are transmitted via transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2865405
    2865405
    MACX MCR-EX-SL-IDSI-I, Ex i output signal conditioner, HART Isolates and sends intrinsically safe 0/4-20 mA signals to a load (I/P converters, control valves, displays) in Ex areas. Electrical 3-way isolation, wire break recognition, SIL 2 in accordance with IEC 61508.
  • Phoenix Contact2924032
    2924032
    MACX MCR-EX-SL-IDSI-I-SP, Ex i output signal conditioner, HART. Isolates and sends intrinsically safe 0/4-20 mA signals to a load (I/P converters, control valves, displays) in Ex areas. Electrical 3-way isolation, wire break recognition, SIL 2 in accordance with IEC 61508, spring-cage connection.
  • Phoenix Contact2865450
    2865450
    MACX MCR-EX-SL-NAM-2RO - Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2924061
    2924061
    MACX MCR-EX-SL-NAM-2RO-SP - Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 relay outputs (N/O contact) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.
  • Phoenix Contact2865463
    2865463
    MACX MCR-EX-SL-NAM-2T - Ex i NAMUR isolating amplifier For operating proximity sensors and switches in Ex areas. The signals are transmitted via 2 transistor outputs (passive) to the safe area. Line fault detection (LFD), 3-way isolation, SIL 2.

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability