Proax
CADEN
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2902829
AllMeasurement & MonitoringSignal conditionerActive input and output signal conditioners

2902829

Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
PHX2902829
MPN
MINI MCR-SL-UI-I-LP-NC
Weight
0.087 kg

MINI MCR-SL-UI-I-LP-NC - Signal conditioner

2-way loop-powered isolating amplifier (supplied on the output side), can be configured via DIP switches, with screw connection technology and standard configuration.

Technical Specifications

Utilization restriction

EMC noteEMC: class A product, see manufacturer's declaration in the download area

Product properties

Product familyMINI Analog
No. of channels1
ConfigurationDIP switches

Insulation characteristics

Overvoltage categoryII
Pollution degree2

Electrical properties

Alignment span± 2 %
Alignment zero± 2 %
Electrical isolation2-way isolation
Electrical isolation between input and outputyes
Limit frequency (3 dB)approx. 30 Hz
Maximum power dissipation for nominal condition19 mW
Step response (10-90%)approx. 16 ms
Maximum temperature coefficient0.01 %/K
Temperature coefficient, typical0.005 %/K
Maximum transmission error< 0.1 % (of final value)
Maximum transmission error< 0.2 % (Without adjustment)

Electrical isolation Input/output

Rated Insulation Voltage50 V AC/DC
Test voltage1.5 kV AC (50 Hz, 60 s)
InsulationBasic insulation in accordance with IEC/EN 61010

Supply

Supply Voltage Rangeloop-powered, no external supply necessary
Power consumption28 mW (without signal)

Signal: Voltage/current

Number of Inputs1
Voltage input signal0 mV ... 1000 mV
Voltage input signal0 mV ... 750 mV
Voltage input signal0 mV ... 500 mV
Voltage input signal0 mV ... 300 mV
Voltage input signal0 mV ... 250 mV
Voltage input signal0 mV ... 200 mV
Voltage input signal0 mV ... 150 mV
Voltage input signal0 mV ... 125 mV
Voltage input signal0 mV ... 120 mV
Voltage input signal0 mV ... 100 mV
Voltage input signal0 mV ... 75 mV
Voltage input signal0 mV ... 60 mV
Voltage input signal0 mV ... 50 mV
Voltage input signal0 V ... 10 V
Voltage input signal0 V ... 7.5 V
Voltage input signal0 V ... 5 V
Voltage input signal0 V ... 3 V
Voltage input signal0 V ... 2.5 V
Voltage input signal0 V ... 2 V
Voltage input signal0 V ... 1.5 V
Voltage input signal0 V ... 1.25 V
Voltage input signal0 V ... 1.2 V
Voltage input signal0 V ... 30 V
Voltage input signal0 V ... 25 V
Voltage input signal0 V ... 20 V
Voltage input signal0 V ... 12.5 V
Voltage input signal0 V ... 12 V
Voltage input signal0 V ... 15 V
Voltage input signal-1000 mV ... 1000 mV
Voltage input signal-750 mV ... 750 mV
Voltage input signal-500 mV ... 500 mV
Voltage input signal-300 mV ... 300 mV
Voltage input signal-250 mV ... 250 mV
Voltage input signal-200 mV ... 200 mV
Voltage input signal-125 mV ... 125 mV
Voltage input signal-120 mV ... 120 mV
Voltage input signal-150 mV ... 150 mV
Voltage input signal-100 mV ... 100 mV
Voltage input signal-75 mV ... 75 mV
Voltage input signal-60 mV ... 60 mV
Voltage input signal-50 mV ... 50 mV
Voltage input signal-10 V ... 10 V
Voltage input signal-7.5 V ... 7.5 V
Voltage input signal-5 V ... 5 V
Voltage input signal-3 V ... 3 V
Voltage input signal-2.5 V ... 2.5 V
Voltage input signal-2 V ... 2 V
Voltage input signal-1.25 V ... 1.25 V
Voltage input signal-1.2 V ... 1.2 V
Voltage input signal-1.5 V ... 1.5 V
Voltage input signal-30 V ... 30 V
Voltage input signal-25 V ... 25 V
Voltage input signal-20 V ... 20 V
Voltage input signal-12.5 V ... 12.5 V
Voltage input signal-12 V ... 12 V
Voltage input signal-15 V ... 15 V
Voltage input signal200 mV ... 1000 mV
Voltage input signal150 mV ... 750 mV
Voltage input signal100 mV ... 500 mV
Voltage input signal60 mV ... 300 mV
Voltage input signal50 mV ... 250 mV
Voltage input signal40 mV ... 200 mV
Voltage input signal25 mV ... 125 mV
Voltage input signal24 mV ... 120 mV
Voltage input signal30 mV ... 150 mV
Voltage input signal20 mV ... 100 mV
Voltage input signal15 mV ... 75 mV
Voltage input signal12 mV ... 60 mV
Voltage input signal10 mV ... 50 mV
Voltage input signal2 V ... 10 V (additional areas can be configured, see table)
Voltage input signal1.5 V ... 7.5 V
Voltage input signal1 V ... 5 V
Voltage input signal0.6 V ... 3 V
Voltage input signal0.5 V ... 2.5 V
Voltage input signal0.4 V ... 2 V
Voltage input signal0.25 V ... 1.25 V
Voltage input signal0.24 V ... 1.2 V
Voltage input signal0.3 V ... 1.5 V
Voltage input signal6 V ... 30 V
Voltage input signal5 V ... 25 V
Voltage input signal4 V ... 20 V
Voltage input signal2.5 V ... 12.5 V
Voltage input signal2.4 V ... 12 V
Voltage input signal3 V ... 15 V
Max. voltage input signal< 40 V
Current Input Signal0 mA ... 40 mA
Current Input Signal0 mA ... 30 mA
Current Input Signal0 mA ... 20 mA
Current Input Signal0 mA ... 12 mA
Current Input Signal0 mA ... 10 mA
Current Input Signal0 mA ... 8 mA
Current Input Signal0 mA ... 7.5 mA
Current Input Signal0 mA ... 5 mA
Current Input Signal0 mA ... 6 mA
Current Input Signal0 mA ... 4 mA
Current Input Signal0 mA ... 3 mA
Current Input Signal0 mA ... 2.5 mA
Current Input Signal0 mA ... 2 mA
Current Input Signal-40 mA ... 40 mA
Current Input Signal-30 mA ... 30 mA
Current Input Signal-20 mA ... 20 mA
Current Input Signal-12 mA ... 12 mA
Current Input Signal-10 mA ... 10 mA
Current Input Signal-8 mA ... 8 mA
Current Input Signal-7.5 mA ... 7.5 mA
Current Input Signal-5 mA ... 5 mA
Current Input Signal-6 mA ... 6 mA
Current Input Signal-4 mA ... 4 mA
Current Input Signal-3 mA ... 3 mA
Current Input Signal-2.5 mA ... 2.5 mA
Current Input Signal-2 mA ... 2 mA
Current Input Signal8 mA ... 40 mA
Current Input Signal6 mA ... 30 mA
Current Input Signal4 mA ... 20 mA
Current Input Signal2.4 mA ... 12 mA
Current Input Signal2 mA ... 10 mA
Current Input Signal1.6 mA ... 8 mA
Current Input Signal1.5 mA ... 7.5 mA
Current Input Signal1 mA ... 5 mA
Current Input Signal1.2 mA ... 6 mA
Current Input Signal0.8 mA ... 4 mA
Current Input Signal0.6 mA ... 3 mA
Current Input Signal0.5 mA ... 2.5 mA
Current Input Signal0.4 mA ... 2 mA
Max. current input signal< 50 mA (Dielectric strength up to 30 V)
Input resistance of voltage input100 kΩ (≤ 1 V)
Input resistance of voltage input1 MΩ (≥ 1 V)
Input resistance current input≤ 50 Ω

Signal

Number of Outputs1
Configurable/programmableYes, preconfigured
Current Output Signal4 mA ... 20 mA
Max. current output signal35 mA (output limit)
Load/Output Load Current Output< 1000 Ω ((UB - 8 V) / 22 mA)
Ripple< 20 mVPP (at 500 Ω)

Connection data

Connection MethodScrew connection
Stripping length12 mm
Screw threadM3
Conductor cross section rigid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 12

Dimensions

Width6.2 mm
Height93.1 mm
Depth101.2 mm

Material specifications

Colorgreen (RAL 6021)
Housing MaterialPBT
Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 2

Ambient conditions

Degree of ProtectionIP20
Ambient Temperature (Operation)-25 °C ... 70 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Altitude≤ 2000 m
Permissible humidity (operation)5 % ... 95 % (non-condensing)

CE

CertificateCE-compliant

UKCA

CertificateUKCA-compliant

UL, USA/Canada

IdentificationUL 508 Listed
IdentificationClass I, Div. 2, Groups A, B, C, D T5
IdentificationClass I, Zone 2, Group IIC

Shipbuilding approval

CertificateDNV GL TAA00002R0

DNV GL data

TemperatureB
HumidityB
VibrationB
EMCB
EnclosureRequired protection according to the Rules shall be provided upon installation on board

EMC data

Noise immunityEN 61000-6-2
NoteWhen being exposed to interference, there may be minimal deviations.
Electromagnetic compatibilityConformance with EMC directive
Noise emissionEN 61000-6-4

Electrostatic discharge

Standards/regulationsEN 61000-4-2
CommentsSafety measures must be taken to prevent electrostatic discharge.

Electromagnetic HF field

DesignationElectromagnetic RF field
Standards/regulationsEN 61000-4-3
Typical deviation from the measuring range final value0.5 %
CommentsCriterion A

Fast transients (burst)

DesignationFast transients (burst)
Standards/regulationsEN 61000-4-4
Typical deviation from the measuring range final value2 %
CommentsCriterion B

Surge current load (surge)

Standards/regulationsEN 61000-4-5
CommentsCriterion B

Conducted interference

DesignationConducted interferences
Standards/regulationsEN 61000-4-6
Typical deviation from the measuring range final value0.5 %
CommentsCriterion A

Standards and Regulations

Electrical isolation2-way isolation

Mounting

Mounting TypeDIN rail mounting
Mounting Positionany
Accessories
  • Phoenix Contact2308111
    2308111
    Transparent cover - MINI MCR DKL
  • Phoenix Contact2810272
    2810272
    MINI MCR-DKL-LABEL - Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL

Why Proax for Phoenix Contact 2902829?

Proax is an authorized distributor of Phoenix Contact 2902829 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size1
Recommended
  • Phoenix Contact2902830
    2902830
    MINI MCR-SL-UI-I-LP-SP-NC, The 6.2 mm wide MINI MCR-SL-UI-I-LP... configurable 2-way isolating amplifier is used to electrically isolate, condition, and filter analog signals.The output loops that supply the loop-powered isolating amplifier enable the isolating amplifier to operate on an active analog input module. The modules are supplied via the current loop of the controller.On the input side, standard analog signals and non-standard analog signals can be connected, starting from 2 mA or 50 mV up to 40 mA or 30 V. These are converted to a 4...20 mA signal.The DIP switches accessible on the housing side enable the configuration of input signal ranges.
  • Phoenix Contact2810243
    2810243
    MINI MCR-SL-UI-F-SP - MCR analog frequency converter for converting standard analog signals into frequency signals or PWM signals, with spring-cage connection. Replacement part: 2902032 MINI MCR-2-UI-FRO-PT.
  • Phoenix Contact2864082
    2864082
    MINI MCR-SL-UI-F - Analog frequency transducers for converting analog standard signals into frequency signals or PWM signals, configurable via DIP switch, with screw connection
  • Phoenix Contact2864480
    2864480
    Limit value switches - MINI MCR-SL-UI-REL
  • Phoenix Contact2864493
    2864493
    MINI MCR-SL-UI-REL-SP - MCR threshold value switch, with adjustable hysteresis and delay time, with spring-cage connection. Replacement part: 2902035 MINI MCR-2-UI-REL-PT.
  • Phoenix Contact2864150
    2864150
    Signal conditioner - MINI MCR-SL-UI-UI-NC
  • Phoenix Contact2864163
    2864163
    MINI MCR-SL-UI-UI-SP-NC, MCR 3-way isolating amplifier, I/O can be configured via DIP switches, for the electrical isolation of analog signals, with spring-cage connection, standard configuration
  • Phoenix Contact2864040
    2864040
    MINI MCR-SL-UI-UI-DUMMY - Non-functioning sample; sample module of a MINI MCR-SL-UI-UI 3-way isolating amplifier.
  • Phoenix Contact2864794
    2864794
    MINI MCR-SL-UI-2I, The 6.2 mm wide configurable 4-way isolating amplifier MINI MCR-SL-UI-2I-... is used for electrical isolation, conversion, amplification and filtering of standard signals.On the input side, the analog standard signals 0...20 mA, 4...20 mA, 0...10 V or 1...5V can be selected, on the output side there are two current outputs that can be set independently of one another with a 0...20 mA-, or 4...20mA signal, electrically isolated (4-way isolation).The DIP switches, which can be accessed on the side of the housing, can be used to configure the input and output signal ranges.Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.
  • Phoenix Contact2864176
    2864176
    Signal duplicator - MINI MCR-SL-UI-2I-NC
  • Phoenix Contact2864189
    2864189
    MINI MCR-SL-UI-2I-SP-NC, The 6.2 mm wide configurable 4-way isolating amplifier MINI MCR-SL-UI-2I-... is used for electrical isolation, conversion, amplification and filtering of standard signals.On the input side, the analog standard signals 0...20 mA, 4...20 mA, 0...10 V or 1...5V can be selected, on the output side there are two current outputs that can be set independently of one another with a 0...20 mA-, or 4...20mA signal, electrically isolated (4-way isolation).The DIP switches, which can be accessed on the side of the housing, can be used to configure the input and output signal ranges.Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.
  • Phoenix Contact2864299
    2864299
    MINI MCR-SL-TC-UI-NC MCR temperature transducer, configurabl
  • Phoenix Contact2811420
    2811420
    MINI MCR-SL-TB - Feed-through terminal block for transmission of signals that are already electrically isolated
  • Phoenix Contact2810780
    2810780
    Signal conditioner - MINI MCR-SL-SHUNT-UI-NC
  • Phoenix Contact2810793
    2810793
    MINI MCR-SL-SHUNT-UI-SP-NC, MCR 3-way isolating amplifier, with configurable input/output, for electrical isolation and conversion of analog signals in the mV range, single-pos. as well as 2-pos. with spring-cage connection, pre-configured
  • Phoenix Contact2811268
    2811268
    MINI MCR-SL-V8-FLK 16-A, Eight MINI analog signal converters with screw connection method can be connected to a control system using a system adapter and system cabling with a minimum of wiring and very low error risk.
  • Phoenix Contact2864079
    2864079
    Repeater power supply - MINI MCR-SL-RPSS-I-I
  • Phoenix Contact2810230
    2810230
    MINI MCR-SL-RPSS-I-I-SP, MCR repeater power supply with HART transmission, input signal 4...20 mA, output signal 4...20 mA, with spring-cage connection.
  • Phoenix Contact2864752
    2864752
    MINI MCR-SL-RPS-I-I-SP, MCR repeater power supplies, spring-cage connection, input signal: (0)4..20 mA, output signal: (0)4..20 mA
  • Phoenix Contact2864422
    2864422
    Repeater power supply - MINI MCR-SL-RPS-I-I

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability