Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2708892
AllIndustrial communication & NetworkingFieldbus communicationMedia converters and isolators
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
PSI-MOS-PROFIB/FO1300 T
Weight
0.252 kg
This product is Not Cancellable/Not Returnable

PSI-MOS-PROFIB/FO1300 T - FO converters

Fiber optic converter with integrated optical diagnostics, alarm contact, for PROFIBUS up to 12 Mbps, T-coupler with two fiber optic interfaces (SC-Duplex), 1300 nm, for fiberglass cable

  • Supply voltage and data signals routed through the DIN rail connectors
  • Can be combined with the PSI copper repeater in a modular way using DIN rail connectors
  • Connections can be plugged in via a COMBICON screw terminal block
  • Automatic data rate detection or fixed data rate setting via DIP switches
  • Redundant power supply possible by means of optional system power supply unit
  • High-quality electrical isolation between all interfaces (PROFIBUS // fiber optic ports // power supply // DIN rail connector)
  • Approved for use in zone 2
  • Integrated optical diagnostics for continuous monitoring of FO paths
  • Floating switch contact for advance warning of critical FO paths
  • Bit retiming for any cascading depth
  • Suitable for all data rates up to 12 Mbps
Technical Specifications

Utilization restriction

CCCex noteUse in potentially explosive areas is not permitted in China.

Product properties

MTTF614 Years (SN 29500 standard, temperature 25°C, operating cycle 21%)
MTTF272 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%)
MTTF113 Years (SN 29500 standard, temperature 40°C, operating cycle 100%)
MTBF307 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day))
MTBF64 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day))

Electrical properties

Electrical isolationVCC // RS-485
Maximum power dissipation for nominal condition2.04 W
Test voltage data interface/power supply1.5 kVrms (50 Hz, 1 min.)

Supply

Supply Voltage Range18 V DC ... 32 V DC (via pluggable COMBICON screw terminal block)
Nominal Supply Voltage24 V DC (in acc. with UL)
Typical current consumption85 mA (24 V DC)
Max. current consumption145 mA
Max. current consumption≤ 2 A (For operation in a joining station, via the DIN rail connector)

Switching

Output nameRelay output
Output descriptionAlarm output
Number of Outputs1
Maximum Switching Voltage60 V DC (Resistive Load, General Load)
Maximum Switching Voltage30 V AC (Resistive load)
Maximum Switching Voltage42 V AC (peak, resistive load)
Limiting Continuous Current0.46 A

Supply

Connection MethodCOMBICON plug-in screw terminal block
Stripping length7.00 mm
Tightening torque0.56 Nm ... 0.79 Nm

Interfaces

Bit distortion, input± 35 % (permitted)
Bit distortion, output< 6.25 %
Bit delay< 1 bit (DIP 7 = OFF, standard operation)
Bit delay11 bit (DIP 7 = ON, redundancy operation)
SignalPROFIBUS

Data: optical FO

No. of channels2
Transmit capacity, minimum-3.4 dBm (50/125 μm, multimode fiberglass)
Transmit capacity, minimum-4.7 dBm (62.5/125 μm, multimode fiberglass)
Transmit capacity, minimum-5.5 dBm (9/125 μm, singlemode fiberglass)
Transmission length incl. 3 dB system reserve25 km (With F-G 50/125 0.7 dB/km at 1300 nm)
Transmission length incl. 3 dB system reserve22 km (with F-G 62.5/125 0.8 dB/km at 1300 nm)
Transmission length incl. 3 dB system reserve45 km (With F-E 9/125 0,4 dB/km at 1300 nm)
Transmission protocolProtocol-transparent to the RS-485 interface
Connection MethodSC duplex
Wavelength1300 nm
Minimum receiver sensitivity-25.5 dBm (Multi mode)
Minimum receiver sensitivity-26.5 dBm (Singlemode)
Maximum receiver sensitivity0 dBm
Transmission mediumMulti-mode fiberglass
Transmission mediumSingle-mode fiberglass

Data: PROFIBUS acc. to IEC 61158, RS-485 2-wire, half duplex, automatic control

Serial transmission speed≤ 12 Mbps
Connection MethodD-SUB-9 female connector
Transmission length≤ 1200 m (depending on the data rate, with shielded, twisted pair data cable)
Single conductor/terminal point, rigid0.2 mm² ... 2.5 mm²
Single-wire/terminal point, flexible0.2 mm² ... 2.5 mm²
Max. AWG conductor cross section, flexible14
Min. AWG conductor cross section, flexible24
Single-wire/terminal point, rigid AWG max.14
Single-wire/terminal point, rigid AWG min.24
Transmission medium2-wire twisted pair, shielded
File format/codingUART (11 Bit, NRZ)
Data direction switchingAutomatic control
Output nominal voltage5 V DC ±0.25 (50 mA)

Dimensions

Width35 mm
Height105 mm
Depth106 mm

Material specifications

Color (Housing)gray (RAL 7042)
Material (Housing)PA 6.6-FR

FO cable

Fiber types50/125 µm
Fiber types62.5/125 µm
Fiber types9/125 µm
Fiber typesFiberglass

Ambient conditions

Degree of ProtectionIP20
Ambient Temperature (Operation)-20 °C ... 60 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Altitude≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation)
Altitude≤ 2000 m (Hazardous locations)
Permissible humidity (operation)30 % ... 95 % (non-condensing)

CE

CertificateCE-compliant

ATEX

Identification II 3 G Ex ec IIC T4 Gc
CertificateUL 21 ATEX 2550X
NotePlease follow the special installation instructions in the documentation!

IECEx

IdentificationEx ec IIC T4 Gc
CertificateIECEx ULD 21.00013X

UL, USA/Canada

IdentificationClass I, Zone 2, AEx ec IIC T4 Gc
IdentificationEx ec IIC T4 Gc X
IdentificationClass I, Div. 2, Groups A, B, C, D

KC approval for South Korea

CertificateMSIP-REI-PCK-2708892

Corrosive gas test

IdentificationISA-S71.04-1985 G3 Harsh Group A

EMC data

Noise immunityEN 61000-6-2:2005
Electromagnetic compatibilityConformance with EMC directive 89/336/EC
Noise emissionEN 55011

Electrostatic discharge

Standards/regulationsEN 61000-4-2
Contact discharge± 6 kV
Discharge in air± 8 kV
CommentsCriterion B

Electromagnetic HF field

Standards/regulationsEN 61000-4-3
Field intensity10 V/m
CommentsCriterion A

Fast transients (burst)

Standards/regulationsEN 61000-4-4
Input± 2 kV
Signal± 2 kV
CommentsCriterion B

Surge current load (surge)

Standards/regulationsEN 61000-4-5
Input± 0.5 kV
Signal± 1 kV
CommentsCriterion B

Conducted interference

Standards/regulationsEN 61000-4-6
CommentsCriterion A
Voltage10 V

Emitted interference

Standards/regulationsEN 55011
CommentsClass A, industrial applications

Criteria

Criterion ANormal operating behavior within the specified limits.
Criterion BTemporary impairment to operational behavior that is corrected by the device itself.

Standards and Regulations

Free from substances that could impair the application of coatingin accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0

Mounting

Mounting TypeDIN rail mounting
Accessories
  • Phoenix Contact1115607
    1115607
    1115607 - Multi-mode OM2 duplex jumper, LC-SC, UPC polishing, length 1 m
  • Phoenix Contact1115605
    1115605
    1115605 - Multi-mode OM2 duplex jumper, LC-SC, UPC polishing, length 2 m
  • Phoenix Contact1115536
    1115536
    1115536 - Multi-mode OM2 duplex jumper, SC-SC, UPC polishing, length 1 m
  • Phoenix Contact1115535
    1115535
    1115535 - Multi-mode OM2 duplex jumper, SC-SC, UPC polishing, length 2 m
  • Phoenix Contact1115574
    1115574
    1115574 - Multi-mode OM2 duplex jumper, ST-SC, UPC polishing, length 1 m
  • Phoenix Contact1115573
    1115573
    1115573 - Multi-mode OM2 duplex jumper, ST-SC, UPC polishing, length 2 m
  • Phoenix Contact1115601
    1115601
    1115601 - Multi-mode OM4 duplex jumper, LC-SC, UPC polishing, length 1 m
  • Phoenix Contact1115600
    1115600
    1115600 - Multi-mode OM4 duplex jumper, LC-SC, UPC polishing, length 2 m
  • Phoenix Contact1115424
    1115424
    1115424 - Multi-mode OM4 duplex jumper, SC-SC, UPC polishing, length 1 m
  • Phoenix Contact1115423
    1115423
    1115423 - Multi-mode OM4 duplex jumper, SC-SC, UPC polishing, length 2 m
  • Phoenix Contact2866983
    2866983
    2866983 - Please use the following item in new systems: 2904614Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A
  • Phoenix Contact2709561
    2709561
    2709561 - DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos.
  • Phoenix Contact2890014
    2890014
    2890014 - DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 2-pos.
  • Phoenix Contact2713645
    2713645
    2713645 - DIN rail connector, color: light grey, nominal current: 8 A (parallel contacts), rated voltage (III/2): 125 V, number of positions: 5, product range: TBUS5-17,5.., pitch: 3.81 mm, mounting: DIN rail mounting, locking: without, mounting: without, type of packaging: packed in cardboard, Item with gold-plated contacts, bus connectors for connecting with electronics housings, 5 parallel contacts
  • Phoenix Contact2901812
    2901812
    FL MM PATCH 1,0 SC-SCRJ, Assembled FO cable, break out cable, multimode fiberglass 50/125 µm (OM2), connector: SC duplex/SC-RJ, degree of protection: IP20, for installation in cable ducts or control cabinets, length: 1 m
  • Phoenix Contact1115550
    1115550
    1115550 - Single-mode OS2 duplex jumper, SC-SC, UPC polishing, length 1 m
  • Phoenix Contact1115548
    1115548
    1115548 - Single-mode OS2 duplex jumper, SC-SC, UPC polishing, length 2 m
  • Phoenix Contact1115582
    1115582
    1115582 - Single-mode OS2 duplex jumper, ST-SC, UPC polishing, length 1 m
  • Phoenix Contact1115618
    1115618
    1115618 - Single-mode OS2 duplex jumper, LC-SC, UPC polishing, length 1 m
  • Phoenix Contact1115617
    1115617
    1115617 - Single-mode OS2 duplex jumper, LC-SC, UPC polishing, length 2 m
  • Phoenix Contact2799432
    2799432
    2799432 - Fiberglass cable, duplex 50/125 µm, by the meter, without connector, for outdoor installation
  • Phoenix Contact2799322
    2799322
    2799322 - Fiber glass cable, duplex 50 µm/125 µm, by the meter, without male connector, for installation in stationary systems and machines
  • Phoenix Contact2313708
    2313708
    2313708 - D-SUB connector, 9-pos., male connector, 90° cable entry, bus system: PROFIBUS DP up to 12 Mbps with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks
  • Phoenix Contact2313685
    2313685
    2313685 - D-SUB connector, 9-pos., male connector, 90° cable entry, bus system: PROFIBUS DP up to 12 Mbps with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; IDC terminal block connection
  • Phoenix Contact2902321
    2902321
    2902321 - D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two M12 cable glands (B-coded) under 180° (axial). Bus system: PROFIBUS DP up to 12 Mbps. Termination resistor via separate M12 terminator.
  • Phoenix Contact2902729
    2902729
    2902729 - D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two 90° cable entries M12 (B-coded). Bus system: PROFIBUS DP up to 12 Mbps. Termination resistor via separate M12 terminator. Long version; S7-compatible.
  • Phoenix Contact2902318
    2902318
    2902318 - D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two 90° M12 cable glands (B-coded). Bus system: PROFIBUS DP up to 12 Mbps. Termination resistor via separate M12 terminator.
  • Phoenix Contact2902320
    2902320
    2902320 - D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two 35° cable entries M12 (B-coded). Bus system: PROFIBUS DP up to 12 Mbps. Termination resistor via separate M12 terminator.
  • Phoenix Contact2702636
    2702636
    2702636 - Active termination resistor for PROFIBUS and RS-485 bus systems, redundant power supply, routing of the supply voltage via DIN rail connector, electrical isolation, switchable termination, integrated programming interface
  • Phoenix Contact2708863
    2708863
    2708863 - Modular repeater for electrical isolation and range increase for PROFIBUS up to 12 Mbps, 4-way isolation, rail-mountable, supply 24 V DC

Why Proax for Phoenix Contact 2708892?

Proax is an authorized distributor of Phoenix Contact 2708892 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended
  • Phoenix Contact2708559
    2708559
    2708559 - Fiber optic converter with integrated optical diagnostics, alarm contact, for PROFIBUS up to 12 Mbps, termination device with one fiber optic interface (SC-Duplex), 1300 nm, for fiberglass cable
  • Phoenix Contact2708290
    2708290
    2708290 - FO converter with integrated optical diagnostics, alarm contact, for PROFIBUS up to 12 Mbps, terminal device with one FO interface (FSMA), 660 nm, for polymer/PCF fiber cable
  • Phoenix Contact2708287
    2708287
    2708287 - FO converter with integrated optical diagnostics, alarm contact, for PROFIBUS up to 12 Mbps, T-coupler with two FO interfaces (FSMA), 660 nm, for polymer/PCF fiber cable
  • Phoenix Contact2708274
    2708274
    2708274 - FO converter with integrated optical diagnostics, alarm contact, for PROFIBUS up to 12 Mbps, terminal device with one FO interface (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
  • Phoenix Contact2708711
    2708711
    2708711 - FO converter with integrated optical diagnostics, coated PCB, alarm contact, for PROFIBUS up to 12 Mbps, T-coupler with two FO interfaces (BFOC), 850 nm, for PCF or fiberglass cable (multimode)
  • Phoenix Contact2708261
    2708261
    2708261 - FO converter with integrated optical diagnostics, alarm contact, for PROFIBUS up to 12 Mbps, T-coupler with two FO interfaces (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
  • Phoenix Contact2708614
    2708614
    2708614 - FO converter with integrated optical diagnostics, coated PCB, alarm contact, for PROFIBUS up to 12 Mbps, T-coupler with two FO interfaces (BFOC), 850 nm, for PCF or fiberglass cable (multimode)
  • Phoenix Contact2708562
    2708562
    2708562 - FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K, MODBUS ...) up to 500 kbps, NRZ coding, termination device with an FO interface (SC-Duplex), 1300 nm, for fiberglass cable
  • Phoenix Contact2708313
    2708313
    2708313 - FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K, Modbus ...) up to 500 kbps, NRZ coding, terminal device with one FO interface (FSMA), 660 nm, for polymer/PCF fiber cable
  • Phoenix Contact2708300
    2708300
    2708300 - FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K, Modbus ...) up to 500 kbps, NRZ coding, T-coupler with two FO interfaces (FSMA), 660 nm, for polymer/PCF fiber cable
  • Phoenix Contact2708339
    2708339
    2708339 - FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K, Modbus ...) up to 500 kbps, NRZ coding, terminal device with one FO interface (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
  • Phoenix Contact2708326
    2708326
    2708326 - FO converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K, Modbus ...) up to 500 kbps, NRZ coding, T-coupler with two FO interfaces (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
  • Phoenix Contact2708575
    2708575
    2708575 - Fiber optic converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4 wire/ INTERBUS up to 2 Mbps, termination device with one fiber optic interface (SC duplex), 1300 nm, for fiberglass cable
  • Phoenix Contact2708342
    2708342
    2708342 - FO converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4-wire/INTERBUS up to 2 Mbps, terminal device with one FO interface (FSMA), 660 nm, for polymer/PCF fiber cable
  • Phoenix Contact2708384
    2708384
    2708384 - FO converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4-wire/INTERBUS up to 2 Mbps, T-coupler with two FO interfaces (FSMA), 660 nm, for polymer/PCF fiber cable
  • Phoenix Contact2708355
    2708355
    2708355 - FO converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4-wire/INTERBUS up to 2 Mbps, terminal device with one FO interface (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
  • Phoenix Contact2708012
    2708012
    2708012 - FO converter for INTERBUS up to 2 Mbps, two relay contacts, terminal device with one FO interface (E2000 duplex) in 850 nm technology, for PCF/fiberglass cable (multimode)
  • Phoenix Contact2708397
    2708397
    2708397 - FO converter with integrated optical diagnostics, alarm contact, for RS-422/RS-485 4-wire/INTERBUS up to 2 Mbps, T-coupler with two FO interfaces (BFOC), 850 nm, for PCF/fiberglass cable (multimode)
  • Phoenix Contact2708588
    2708588
    2708588 - Fiber optic converter with integrated optical diagnostics, alarm contact, for RS-232 interfaces up to 115.2 kbps, termination device with one fiber optic interface (SC duplex), 1300 nm, for fiberglass cable
  • Phoenix Contact2708368
    2708368
    2708368 - FO converter with integrated optical diagnostics, alarm contact, for RS-232 interfaces up to 115.2 kbps, terminal device with one FO interface (FSMA), 660 nm, for polymer/PCF fiber cable

Available for order

Phoenix Contact Availability