Official DistributorSKU
MPN
FL SWITCH 1005N-2SFX
Weight
0.259 kg
This product is Not Cancellable/Not Returnable
Series FL-SWITCH
FL SWITCH 1005N-2SFX - Industrial Ethernet Switch
Unmanaged Switch 1000, 5 RJ45 ports 10/100 Mbps, 2 SFP ports 100 Mbps, PROFINET Conformance-Class A
- RJ45 ports support a transmission speed of 10/100 Mbps
- QoS-prioritized (Quality of Service) messages
- Local diagnostic indicators with LEDs
- PROFINET PTCP filter for reliable communication on PROFINET networks
- Enhanced traffic prioritization for automation protocols
- Energy-efficient Ethernet in accord. with IEEE 802.3az
- PROFINET conformance Class A for real-time data exchange, alarms, and diagnostics
- Auto negotiation and autocrossing detection simplifies installation and setup
Technical Specifications
Dimensions
| Width | 22.5 mm |
| Height | 140.4 mm |
| Depth | 92.4 mm |
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Material specifications
| Housing Material | Polycarbonate fiber reinforced |
Mounting
| Mounting Type | DIN rail mounting |
Ethernet (RJ45)
| Number of interfaces | 5 |
| Connection Method | RJ45 |
| Note on the connection method | Auto negotiation and autocrossing |
| Transmission Speed | 10/100 Mbps |
| Transmission physics | Ethernet in RJ45 twisted pair |
| Transmission length | 100 m (per segment) |
| Signal LEDs | Data receive, link status |
| No. of channels | 5 (RJ45 ports) |
Ethernet (SFP)
| Number of interfaces | 2 |
| Connection Method | SFP |
| Transmission Speed | 100 Mbps (full duplex) |
| Transmission physics | Depending on the SFP module |
| Transmission length | up to 40 km (Depending on the fiber/SFP module used) |
| Signal LEDs | Data receive, link status |
| No. of channels | 2 (SFP ports) |
Product properties
| Product family | Unmanaged Switch 1000 |
| MTTF | 107.9 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) |
| MTTF | 1346 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| MTTF | 1294.8 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
Switch functions
| Basic Functions | Unmanaged switch |
| Basic Functions | Autonegotiation |
| Basic Functions | Store and Forward switching mode |
| PROFINET conformance class | Conformance-Class A |
| MAC address table | 2k |
| Status and diagnostic indicators | LEDs: US, link and activity per port |
| Additional functions | 100 BASE-TX/100BASE-FX (IEEE 802.3u) |
| Additional functions | Quality of Service (QoS) prioritization (IEEE 802.1p) |
| Additional functions | Energy-efficient Ethernet (IEEE 802.3az) |
| Additional functions | 10Base-T (IEEE 802.3) |
Security functions
| Basic Functions | Unmanaged switch |
| Basic Functions | Autonegotiation |
| Basic Functions | Store and Forward switching mode |
Electrical properties
| Maximum power dissipation for nominal condition | 7.44 W (at 24 V DC) |
| Transmission medium | Copper |
Supply
| Supply voltage (DC) | 24 V DC |
| Supply voltage (AC) | 24 V AC (50/60 Hz) |
| Supply Voltage Range | 9 V DC ... 32 V DC |
| Supply Voltage Range | 18 V AC ... 30 V AC (50/60 Hz) |
| Power supply connection | Via COMBICON, max. conductor cross section 2.5 mm² |
| Residual ripple | 3.6 VPP (within the permitted voltage range) |
| Max. current consumption | 310 mA (at 9 V DC) |
| Typical current consumption | 25 mA (at 24 V DC) |
Connection technology
| Connection name | Power supply |
| pluggable | yes |
Power supply
| Connection Method | Push-in spring connection |
| Conductor cross section, rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
| Stripping length | 10 mm |
Ambient conditions
| Degree of Protection | IP30 |
| Ambient Temperature (Operation) | -10 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Altitude | 2000 m (maximum) |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Shock (operation) | 30g (EN 60068-2-27) |
| Vibration (Operation) | in acc. with IEC 60068-2-6: 5g, 150 Hz |
| Air pressure (operation) | 79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating) |
| Air pressure (storage/transport) | 79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating) |
Conformity/Approvals
| UL, USA / Canada | UL 61010-1, UL 61010-2-201Class I, Div. 2, Groups A, B, C, D, T4Class I, Zone 2, Group IIC, T4 |
| FCC | Title 47 Part 15 Subpart B:2018 Class A |
Functionality
| Basic Functions | Unmanaged switch |
| Basic Functions | Autonegotiation |
| Basic Functions | Store and Forward switching mode |
Signaling
| Status display | LEDs: US, link and activity per port |
Accessories
Plug component, nominal current: 12 A, rated voltage (III/2): 320 V, number of positions: 3, pitch: 5 mm, connection method: Push-in spring connection, Color: light gray, contact surface: Tin
Protection antisurtension selon classe EA (CAT6A), pour Ethernet Gigabit (jusqu'à 10 Gbits/s), Token Ring, FDDI/CDDI, RNIS, DS1. Convient également pour la technologie Power over Ethernet (PoE++ / 4PPoE) en « mode A » et « mode B ». Adaptateur RJ45 avec câble de terre séparé et pied encliquetable de raccordement à la terre pour profilés NS 35.
1085485 - The FL DIN-RAIL ADAPTER 22.5 is designed to allow products 22.5 mm wide to be mounted flush to a standard 35 mm DIN rail, in any orientation.
1085488 - The FL PANEL ADAPTER 22.5 is designed to allow products 22.5 mm wide to be mounted flush to a panel, in any orientation.
1408360 - Patch cable, CAT6A, 4-pair, shielded, connection not crossed (line), assembled at both ends with RJ45/IP20 connectors, outer sheath material: PUR, length: 2.0 m- 1408365 - Patch cable, CAT6A, 4-pair, shielded, connection not crossed (line), assembled at both ends with RJ45/IP20 connectors, outer sheath material: PUR, length: 3.0 m
1408968 - Patch cable, degree of protection: IP20, cable length: 1 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET- 1408969 - Patch cable, degree of protection: IP20, cable length: 2 m, number of positions: 4, 100 Mbps, CAT5, material: PA 6.6, PROFINET
- Câble de jonction, indice de protection: IP20, longueur de câble: 5 m, nombre de pôles: 4, 100 Mbit/s, CAT5, matériau: PA 6.6, PROFINET
Why Proax for Phoenix Contact 1085176?
Proax is an authorized distributor of Phoenix Contact 1085176 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Switch ethernet étroit, quatre ports RJ45 avec 10/100 Mbit/s sur tous les ports, un port SFP avec 100 Mbit/s, détection automatique de la vitesse de transmission, fonction auto-crossing et QoS
Switch ethernet étroit, large plage de température, cinq ports RJ45 avec 10/100 Mbit/s sur chacun d'eux, deux ports SFP avec 100 Mbit/s, détection automatique de la vitesse de transmission, fonction auto-crossing et QoS
Switch ethernet étroit, large plage de température, cinq ports RJ45 avec 10/100 Mbit/s sur tous les ports, détection automatique de la vitesse de transmission, fonction auto-crossing et QoS
1085169 - Narrow Ethernet switch, wide temperature range, four RJ45 ports with 10/100 Mbps on all ports, one SFP port with 100 Mbps, automatic data transmission speed detection, autocrossing function, and QoS
1085165 - Narrow Ethernet switch, wide temperature range, eight RJ45 ports with 10/100 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS
FL SWITCH 1008E, Ethernet switch with eight RJ45 ports, meets IEC 61850-3 and IEEE 1613 standards. Automatic detection of data transmission speed of 10/100 Mbps (RJ45) with autocrossing function.
FL SWITCH 1000T-8POE-GT-2SFP, PoE+ Ethernet switch conforms to IEEE 802.3at. Includes eight 10/100/1000 Mbps PoE+ ports, two 1000 Mbps SFP ports, a total PoE system budget of 120 W, and jumbo frames up to 9600 bytes.
Switch Ethernet étroit, plage de température, douze ports RJ45 avec 10/100 Mbit/s sur tous les ports, deux ports SFP avec 100/1000 Mbit/s, détection automatique de la vitesse de transmission, fonction auto-crossing et QoS
