![Phoenix Contact FL SWITCH 1008E](https://proax.ca/images/products/phoenix-contact/PHX-263048.jpg)
SKU
MPN
2891065
Weight
0.875 kg
This product is Not Cancellable/Not Returnable
Series FL-SWITCH
FL SWITCH 1008E - Industrial Ethernet Switch
Ethernet switch with eight RJ45 ports, meets IEC 61850-3 and IEEE 1613 standards. Automatic detection of data transmission speed of 10/100 Mbps (RJ45) with autocrossing function.
- Wide operating temperature range of -40 °C ... 75 °C
- QoS-prioritized (Quality of Service) messages
- Network structure according to IEC 61850
- IEEE 1613
- Alarm contact for power supply and link status diagnostics
- Local diagnostic indicators with LEDs
- Intended for use in power substations
- Auto negotiation and autocrossing detection simplifies installation and setup
Technical Specifications
Dimensions
Width | 54.4 mm |
Height | 146.4 mm |
Depth | 125 mm |
Material specifications
Housing Material | Aluminum |
Mounting
Mounting Type | DIN rail mounting |
Ethernet (RJ45)
Connection Method | RJ45 |
Note on the connection method | Auto negotiation and autocrossing |
Transmission Speed | 10/100 Mbps |
Transmission physics | Ethernet in RJ45 twisted pair |
Transmission length | 100 m |
No. of channels | 8 (RJ45 ports) |
Data flow control/protocols | IEC 61850-3, IEEE 1613 |
Product properties
Product family | Unmanaged Switch 1000 |
Type | Block design |
MTTF | 86.6 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) |
Insulation characteristics
Protection class | III (VDE 0106, IEC 60536) |
Switch functions
Basic Functions | Unmanaged switch / autonegotiation, complies with IEEE 802.3, store and forward switching mode, includes QoS and alarm contact. Meets IEC 61850-3 and IEEE 1613 standards |
Signal contact control voltage | 24 V DC |
Signal contact control current | 100 mA |
MAC address table | 2k |
Status and diagnostic indicators | LEDs: US1, US2 (redundant voltage supply), link and activity per port |
Additional functions | Autonegotiation |
Security functions
Basic Functions | Unmanaged switch / autonegotiation, complies with IEEE 802.3, store and forward switching mode, includes QoS and alarm contact. Meets IEC 61850-3 and IEEE 1613 standards |
Electrical properties
Local diagnostics | US1, US2 Supply voltage Green LED |
Local diagnostics | LNK/ACT Link status/data transmission Green LED |
Local diagnostics | 100 Data transmission speed Green LED |
Local diagnostics | Alarm Power failure at US1 or US2/Link failure |
Maximum power dissipation for nominal condition | 10.56 W |
Transmission medium | Copper |
Supply
Supply voltage (DC) | 24 V DC (redundant) |
Supply voltage (DC) | 48 V DC |
Supply Voltage Range | 12 V DC ... 57 V DC |
Inrush Current | 9.84 A (0.2 ms) |
Residual ripple | 3.6 VPP (within the permitted voltage range) |
Typical current consumption | 440 mA (at US = 24 V DC) |
Function
Signal contact control voltage | 24 V DC |
Signal contact control current | 100 mA |
Connection technology
Connection name | Power supply |
Power supply
Connection Method | COMBICON plug-in screw terminal block |
Conductor cross section, rigid | 0.2 mm² ... 2.5 mm² |
Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
Conductor cross section AWG | 24 ... 14 |
Stripping length | 7 mm |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | -40 °C ... 75 °C |
Ambient temperature (storage/transport) | -45 °C ... 85 °C |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
Air pressure (operation) | 82 kPa ... 108 kPa (up to 1500 m above sea level) |
Standards and Regulations
Standards/specifications | IEC 61850-3 |
Standards/specifications | IEEE 1613 |
EMC data
Conformance with EMC directives | IEC 61000-6-2 IEC 61000-4-2 (ESD) Criterion B |
Conformance with EMC directives | IEC 61000-4-3 (immunity to radiated interference) Criterion A |
Conformance with EMC directives | IEC 61000-4-4 (burst) Criterion A |
Conformance with EMC directives | IEC 61000-4-5 (surge) Criterion B |
Conformance with EMC directives | IEC 61000-4-6 (immunity to conducted interference) Criterion A |
Conformance with EMC directives | IEC 61000-4-8 (immunity to magnetic fields) Criterion A |
Conformance with EMC directives | IEC 61000-4-9 (immunity to pulsed magnetic field) Criterion B |
Conformance with EMC directives | EN 55022 (emitted interference) Criterion B |
Noise immunity | IEC 61850-3, IEEE 1613, EN 61000-6-2: 2005 |
Noise emission | EN 61000-6-4 |
Functionality
Basic Functions | Unmanaged switch / autonegotiation, complies with IEEE 802.3, store and forward switching mode, includes QoS and alarm contact. Meets IEC 61850-3 and IEEE 1613 standards |
Signaling
Status display | LEDs: US1, US2 (redundant voltage supply), link and activity per port |
Accessories
- 1754449 - PCB connector, nominal cross section: 2.5 mm2, color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, contact connection type: Socket, number of potentials: 2, number of rows: 1, number of positions: 2, number of connections: 2, product range: MSTB 2,5/..-ST, pitch: 5 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard
- 1754504 - PCB connector, nominal cross section: 2.5 mm2, color: green, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, contact connection type: Socket, number of potentials: 5, number of rows: 1, number of positions: 5, number of connections: 5, product range: MSTB 2,5/..-ST, pitch: 5 mm, connection method: Screw connection with tension sleeve, screw head form: L Slotted, conductor/PCB connection direction: 0 °, locking clip: - Locking clip, plug-in system: COMBICON MSTB 2,5, locking: without, mounting: without, type of packaging: packed in cardboard
- 2881007 - Surge protection in accordance with Class EA (CAT6A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE++ / 4PPoE) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.
Why Proax for Phoenix Contact FL SWITCH 1008E?
Proax is an authorized distributor of Phoenix Contact FL SWITCH 1008E and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Alternate Names | FLSWITCH1008E |
Pack Size | 1 |
Recommended