2702944
Official DistributorSKU
PHX2702944
MPN
FL MC EF 660 SCRJ
Weight
0.173 kg
Series FL-MC-EF
FL MC EF 660 SCRJ - FO converters
FO converter, for converting 100Base-T to polymer and PCF fiber (660 nm), SC-RJ FO connection (PROFINET standard), can be mounted on a DIN rail, 24 V DC supply
- Link fault pass through (LFPT) function for easy connection monitoring
- Very low delay times
- Mounting on a DIN rail
- Backplane bus contact, enabling alternative or redundant 24 V power supply
Technical Specifications
Product properties
| MTTF | 929 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) |
| MTTF | 461 Years (SN 29500 standard, temperature 40°C, operating cycle 34.25%) |
| MTTF | 204 Years (SN 29500 standard, temperature 40°C, operating cycle 100%) |
Electrical properties
| Electrical isolation | VCC // Ethernet |
| Maximum power dissipation for nominal condition | 2.4 W |
| Test voltage data interface/power supply | 1.5 kVrms (50 Hz, 1 min.) |
| Test voltage data interface/power supply | 1500 V |
Supply
| Supply Voltage Range | 18 V DC ... 32 V DC (via pluggable COMBICON screw terminal block) |
| Supply Voltage Range | 18 V DC ... 32 V DC (as an alternative or redundant, via backplane bus contact and system current supply) |
| Typical current consumption | ≤ 85 mA (24 V DC) |
| Max. current consumption | 100 mA (24 V DC) |
| Protective circuit | Reverse polarity protection |
Switching
| Output name | Relay output |
| Number of Outputs | 2 |
| Contact switching type | N/O contact |
| Maximum Switching Voltage | 60 V AC/DC |
| Max. switching current | 1 A |
Supply
| Connection Method | Plug-in screw terminal block (COMBICON), redundancy possible |
| Tightening torque | 0.56 Nm ... 0.79 Nm |
Interfaces
| Signal | Ethernet |
| Signal | PROFINET |
Data: optical FO
| Transmit capacity, minimum | min. -8 dBm (980/1000 µm, static) |
| Transmit capacity, minimum | min. -19 dBm (200/230 µm, static) |
| Transmit capacity, maximum | max. -2 dBm (980/1000 µm, static) |
| Transmit capacity, maximum | max. -11 dBm (200/230 µm, static) |
| Transmission length incl. 3 dB system reserve | 50 m (Polymer fiber with F-P 980/1000 230 dB/km) |
| Transmission length incl. 3 dB system reserve | 100 m (PCF fiber with F-K 200/230 8 dB/km) |
| Connection Method | SC-RJ |
| Wavelength | 660 nm |
| Minimum receiver sensitivity | -23 dBm (980/1000 µm, static) |
| Minimum receiver sensitivity | -26.8 dBm (200/230 µm, static) |
| Transmission medium | Polymer fiber |
| Transmission medium | PCF fiber |
Data: Ethernet interface, 100Base-T(X) in accordance with IEEE 802.3
| Transmission Speed | 100 Mbps |
| Connection Method | RJ45 jack, shielded |
| No. of channels | 1 |
| Transmission length | 100 m (shielded twisted pair) |
| Transmission medium | Copper |
| Link through | Link fault pass through |
Dimensions
| Width | 22.5 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
Material specifications
| Color (Housing) | green (RAL 6021) |
| Material (Housing) | PA V0 |
FO cable
| Fiber types | 980/1000 µm |
| Fiber types | 200/230 µm |
| Fiber types | Polymer fiber |
| Fiber types | PCF fiber |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Altitude | ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
CE
| Certificate | CE-compliant |
Corrosive gas test
| Identification | ISA-S71.04-1985 G3 Harsh Group A |
EMC data
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Conducted noise emission | EN 61000-6-3 Class B, domain of use: residential and small commercial |
Electrostatic discharge
| Standards/regulations | EN 61000-4-2 |
| Contact discharge | ± 6 kV (Test Level 3) |
| Discharge in air | ± 8 kV (Test Level 3) |
| Indirect discharge | ± 6 kV |
| Comments | Criterion B |
Electromagnetic HF field
| Standards/regulations | EN 61000-4-3 |
| Frequency Range | 80 MHz ... 3 GHz (Test Level 3) |
| Field intensity | 10 V/m |
| Comments | Criterion A |
Fast transients (burst)
| Standards/regulations | EN 61000-4-4 |
| Input | ± 2.2 kV (1 minute) |
| Signal | ± 2.2 kV (1 minute) |
| Comments | Criterion B |
Surge current load (surge)
| Standards/regulations | EN 61000-4-5 |
| Input | ± 0.5 kV (Supply) |
| Signal | ± 1 kV (Shielded cable) |
| Comments | Criterion B |
Conducted interference
| Standards/regulations | EN 61000-4-6 |
| Frequency Range | 0.15 MHz ... 80 MHz |
| Comments | Criterion A |
| Voltage | 10 V |
Emitted interference
| Standards/regulations | EN 61000-6-4 |
| Comments | Class A, industrial applications |
Criteria
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Standards and Regulations
| Free from substances that could impair the application of coating | in accordance with VW-AUDI-Seat central standard P-VW 3.10.7 57 65 0 |
Mounting
| Mounting Type | DIN rail mounting |
Accessories
CAT5-SF/UTP cable (J-02YS(ST)C HP 2 x 2 x 24 AWG), heavy-duty installation cable, 2 x 2 x 0.22 mm2, solid conductor, shielded, outer sheath: 7.8 mm diameter, inner sheath: 5.75 mm ± 0.15 mm diameter
FL CAT5 FLEX - By the meter, Installation cable, Ethernet CAT5 (100 Mbps), shielded, PUR halogen-free, water blue RAL 5021, 4-wire (2x2xAWG26/7, SF/UTP), color single wire: white/orange-orange, white/green-green, cable length: Free entry (1.0 ... 1000.0 m)
FL CRIMPTOOL - Crimping pliers, for assembling the RJ45 plugs FL PLUG RJ45..., for assembly on site
PSM-SET-SCRJ-DUP/2-HCS - FO connectors, degree of protection: IP20, number of positions: 2, MM, material: Plastic, connection method: Cable connection, cable outlet: straight, color: black
PSM-SET-SCRJ-DUP/2-POF - FO connectors, degree of protection: IP20, number of positions: 2, MM, material: Metal, connection method: Push-pull, cable outlet: straight
HCS assembly kit for SC-RJ quick mounting connectors, including stripping blade, stripping pliers, aramide yarn scissors, fiber stripper, microscope, fiber cleaving tool for standard HCS and HCS GI fibers, two SC-RJ connectors for standard HCS fiber, and documentation
VS-SCRJ-POF-POLISH - Refilling set for VS-SC-RJ-POF-KONFTOOL-POLISH, consisting of two polishing discs and a polisher
PSM-LWL-KDHEAVY-980/1000 - Polymer fiber cable, duplex 980 µm/1000 µm, medium-weight version for installation in stationary systems and machines, by the meter without male connector
PSM-LWL-HCS-RUGGED-200/230 - PCF cable, duplex 200 µm/230 µm, by the meter without male connector, for installation in stationary systems and machines
PSM-LWL-RUGGED-980/1000 - Polymer fiber cable, duplex 980µm/1000µm, heavy-weight version for installation in stationary systems and machines, by the meter without male connector
PSM-LWL-RUGGED-FLEX-980/1000 - Polymer fiber cable, duplex 980/1000 µm, heavy-weight, highly flexible version for flexible conduit applications, by the meter, without connector
PSM-LWL-HCSO-200/230 - PCF cable, duplex 200/230 µm, by the meter, without connector, for outdoor installation
FL FOC PN-B-980/1000 - PROFINET polymer fiber cable, duplex 980 µm/1000 µm, heavy-weight design, for installation in stationary systems and machines, by the meter, without male connector
FL FOC PN-C-FLEX-980/1000 - PROFINET polymer fiber cable, duplex, 980/1000 µm, heavy-weight highly flexible design, for flexible cable conduit applications, by the meter, without connector
ME 22,5 TBUS 1,5/ 5-ST-3,81 GN - DIN rail connector, color: green, nominal current: 8 A (parallel contacts), rated voltage (III/2): 125 V, number of positions: 5, product range: TBUS5-22,5.., pitch: 3.81 mm, mounting: DIN rail mounting, locking: without, mounting: without, type of packaging: packed in cardboard, Item with gold-plated contacts, bus connectors for connecting with electronics housings, 5 parallel contacts
PSM-POF-KONFTOOL - Polymer fiber DIY case, consisting of: Stripping knife, stripping pliers, polishing wheels for F-SMA and SC-RJ quick mounting connectors, polishing pad and emery paper
VS-08-RJ45-5-Q/IP20 - RJ45 connector, design: RJ45, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5, material: Plastic, connection method: Insulation displacement connection, connection cross section: AWG 26- 23, cable outlet: straight, color: traffic grey A RAL 7042, Ethernet
VS-08-RJ45-5-Q/IP20 BK - RJ45 connector, design: RJ45, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5, material: Plastic, connection method: Insulation displacement connection, connection cross section: AWG 26- 23, cable outlet: straight, color: black, Ethernet
VS-08-RJ45-10G/Q - RJ45 connector, design: RJ45, degree of protection: IP20, number of positions: 8, 10 Gbps, CAT6A, material: Plastic, connection method: Insulation displacement connection, connection cross section: AWG 26- 24, cable outlet: straight, color: black, Ethernet
NBC-R4AC/10G-R4AC/10G-94F/2,0 - Patch cable, CAT6A, 4-pair, shielded, connection not crossed (line), assembled at both ends with RJ45/IP20 connectors, outer sheath material: PUR, length: 2.0 m- NBC-R4AC/10G-R4AC/10G-94F/3,0 - Patch cable, CAT6A, 4-pair, shielded, connection not crossed (line), assembled at both ends with RJ45/IP20 connectors, outer sheath material: PUR, length: 3.0 m
Why Proax for Phoenix Contact 2702944?
Proax is an authorized distributor of Phoenix Contact 2702944 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
FL MC EF 1300 MM ST - FO converter with B-FOC (ST®) fiber optic connection (1300 nm), for converting 10/100Base-T(X) to multi-mode fiberglass (50/125 µm). Auto negotiation and auto MDI(X) function. Comprehensive link diagnostics. DIN-rail mountable, 18 ... 30 V DC supply.
FL MC EF WDM-SET SC - FO converter set, consisting of type A devices and type B devices, for full duplex transmission from 10/100Base-T(X) to individual simplex fiberglass with WDM (wavelength division multiplex) technology. SC simplex fiber optic connection (1550/1310 nm).
FL MC EF WDM-B SC - FO converter (replacement device B), for full duplex transmission from 10/100Base-T(X) to individual simplex fiberglass with WDM (wavelength division multiplex) technology, SC simplex fiber optic connection (1550/1310 nm). Device set (type A and type B) required for operation.
FL MC EF WDM-A SC - FO converter (replacement device A), for full duplex transmission from 10/100Base-T(X) to individual simplex fiberglass with WDM (wavelength division multiplex) technology, SC simplex fiber optic connection (1310/1550 nm). Device set (type A and type B) required for operation.
FL MC ETH/FO 660 T - Ethernet T-coupler for converting from 2x RJ45 to 2x SC-RJ FO, 660 nm, 100 m distance with HCS fiber, for all network structures, redundancy with RSTP + FRD, configuration with WBM, IGMP snooping, multicast filtering, VLAN, SNMP, and port mirroring integrated.
FL MC 2000E LC - FO converter with LC duplex fiber optic connection (1300 nm), for converting 100Base-TX to multi-mode fiberglass. Auto MDI(X) function. Comprehensive link diagnostics. DIN rail mountable, 12 ... 57 V DC supply. Meets IEC 61850-3 and IEEE 1613 standards.
FL MC 2000T ST - FO converter with ST fiber optic connection (1300 nm), for converting 100Base-TX to multi-mode fiberglass. Auto MDI(X) function and comprehensive link diagnostics. DIN rail mountable with wide operating temperature range.
FL MC 2000T SC - FO converter with SC duplex fiber optic connection (1300 nm), for converting 100Base-TX to multi-mode fiberglass. Auto MDI(X) function and comprehensive link diagnostics. DIN rail mountable with wide operating temperature range.
FL MC 10/100BASE-T/FO G1300 SM - FO converter, for converting 10/100 Base-T(X) to single mode fiberglass, (1300 nm), SC duplex FO connection, rail-mountable, supply 24 V DC
FL MC 10/100BASE-T/FO-660, FO converter, for converting 10/100Base-T to polymer and PCF fiber, (660 nm), SC-RJ FO connection (PROFINET standard), rail-mountable, supply 24 V DC
FL MC 1000 SC - FO converter with SC duplex fiber optic connection (1300 nm), for converting 100Base-TX to multi-mode fiberglass. Auto MDI(X) function and comprehensive link diagnostics. DIN rail mountable.
