Official DistributorSKU
MPN
FL MC 10/100BASE-T/FO G1300
Weight
0.173 kg
Series FL-MC
FL MC 10/100BASE-T/FO G1300 - FO converters
FO converter, for converting 10/100Base-T(X) to multimode fiberglass, (1300 nm), SC duplex FO connection, rail-mountable, supply 24 V DC
Technical Specifications
Product properties
| MTBF | 595 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| MTBF | 156 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) |
Electrical properties
| Electrical isolation | VCC // Ethernet |
| Maximum power dissipation for nominal condition | 1.9 W |
| Test voltage data interface/power supply | 1.5 kVrms (50 Hz, 1 min.) |
| Test voltage data interface/power supply | 1500 V |
Supply
| Supply Voltage Range | 10 V DC ... 30 V DC |
| Nominal Supply Voltage | 24 V DC ±5 % (as an alternative or redundant, via backplane bus contact and system current supply) |
| Typical current consumption | ≤ 95 mA (24 V DC) |
| Protective circuit | Reverse polarity protection |
| Connection Method | Plug-in screw terminal block (COMBICON), redundancy possible |
Interfaces
| Signal | Ethernet |
Data: optical FO
| Transmit capacity, minimum | min. -23.5 dBm ((50/125 µm) dynamic in link mode (average)) |
| Transmit capacity, minimum | min. -20 dBm ((62,5/125 µm) dynamic in link mode (average)) |
| Transmit capacity, minimum | min. -20.5 dBm (50/125 µm, static) |
| Transmit capacity, minimum | min. -17 dBm (62,5/125 µm, static) |
| Transmit capacity, maximum | max. -14 dBm ((50/125 µm) dynamic in link mode (average)) |
| Transmit capacity, maximum | max. -14 dBm ((62,5/125 µm) dynamic in link mode (average)) |
| Transmit capacity, maximum | max. -11 dBm (50/125 µm, static) |
| Transmit capacity, maximum | max. -11 dBm (62,5/125 µm, static) |
| Transmission length incl. 3 dB system reserve | 6.4 km (F-G 50/125 0.7 dB/km F 1200) |
| Transmission length incl. 3 dB system reserve | 2.8 km (F-G 50/125 1.6 dB/km F 800) |
| Transmission length incl. 3 dB system reserve | 10 km (F-G 62.5/125 0.7 dB/km F 1000) |
| Transmission length incl. 3 dB system reserve | 3 km (F-G 62.5/125 2.6 dB/km F 600) |
| Transmission length incl. 3 dB system reserve | 2 km (with 2GK200/230 GI-HCS) |
| Connection Method | SC duplex |
| Wavelength | 1300 nm |
| Minimum receiver sensitivity | min. -31 dBm (dynamic in link mode (average)) |
| Minimum receiver sensitivity | min. -28 dBm (static) |
| Transmission medium | Multi-mode fiberglass |
| Transmission medium | GI-HCS fiber |
Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3
| Serial transmission speed | 10/100 Mbps |
| Connection Method | RJ45 jack, shielded |
| Transmission length | 100 m (shielded twisted pair) |
| Transmission medium | Copper |
| Signal LEDs | Activity (yellow), Link status (green), 100 Mbps (green) |
| Auto-negotiation modes | optionally transparent via TP and FO (default) or locally on TP |
| Link through | Link down is automatically forwarded to the second connection |
| MDI-/MDI-X switchover | Built-in switch for line (1:1) and crossover connection |
Dimensions
| Width | 22.5 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
Material specifications
| Color (Housing) | green (RAL 6021) |
| Material (Housing) | PA V0 |
FO cable
| Fiber types | 50/125 µm |
| Fiber types | 62.5/125 µm |
| Fiber types | Fiberglass |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | 0 °C ... 55 °C |
| Permissible humidity (operation) | 30 % ... 95 % (non-condensing) |
ATEX
| Identification | II 3 G Ex nAC IIC T4 X |
| Note | Please follow the special installation instructions in the documentation! |
UL, USA/Canada
| Identification | Class I, Zone 2, AEx nc IIC |
EMC data
| Noise immunity | EN 61000-6-2:2005 |
| Electromagnetic compatibility | Conformance with EMC directive 89/336/EC |
| Noise emission | EN 50081-2 |
Mounting
| Mounting Type | DIN rail mounting |
Why Proax for Phoenix Contact 2708164?
Proax is an authorized distributor of Phoenix Contact 2708164 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2708177 - FO converter, for converting 10/100 Base-T(X) to single mode fiberglass, (1300 nm), SC duplex FO connection, rail-mountable, supply 24 V DC
2708193 - FO converter, for converting 10/100Base-T to polymer and PCF fiber, (660 nm), SC-RJ FO connection (PROFINET standard), rail-mountable, supply 24 V DC
2891320 - FO converter with SC duplex fiber optic connection (1300 nm), for converting 100Base-TX to multi-mode fiberglass. Auto MDI(X) function and comprehensive link diagnostics. DIN rail mountable.
2891321 - FO converter with ST fiber optic connection (1300 nm), for converting 100Base-TX to multi-mode fiberglass. Auto MDI(X) function and comprehensive link diagnostics. DIN rail mountable.
2891056 - FO converter with LC duplex fiber optic connection (1300 nm), for converting 100Base-TX to multi-mode fiberglass. Auto MDI(X) function. Comprehensive link diagnostics. DIN rail mountable, 12 ... 57 V DC supply. Meets IEC 61850-3 and IEEE 1613 standards.
2891156 - FO converter with LC duplex fiber optic connection (1300 nm), for converting 100Base-TX to single mode fiberglass. Auto MDI(X) function. Comprehensive link diagnostics. DIN rail mountable, 12 ... 57 V DC supply. Meets IEC 61850-3 and IEEE 1613 standards.
2891315 - FO converter with SC duplex fiber optic connection (1300 nm), for converting 100Base-TX to multi-mode fiberglass. Auto MDI(X) function and comprehensive link diagnostics. DIN rail mountable with wide operating temperature range.
2891318 - FO converter with SC duplex fiber optic connection (1300 nm) for converting 100Base-TX to single mode fiberglass with a maximum FO segment length of 40 km. Auto MDI(X) function and comprehensive link diagnostics. DIN rail mountable with wide operating temperature range.
2891317 - FO converter with SC duplex fiber optic connection (1300 nm), for converting 100Base-TX to single mode fiberglass with a maximum FO segment length of 20 km. Auto MDI(X) function and comprehensive link diagnostics. DIN rail mountable with wide operating temperature range.
2891316 - FO converter with ST fiber optic connection (1300 nm), for converting 100Base-TX to multi-mode fiberglass. Auto MDI(X) function and comprehensive link diagnostics. DIN rail mountable with wide operating temperature range.
2902856 - FO converter with SC duplex fiber optic connection (1300 nm), for converting 10/100Base-T(X) to single mode fiberglass (9/125 µm). Auto negotiation and auto MDI(X) function. Comprehensive link diagnostics. DIN-rail mountable, 18 ... 30 V DC supply.
2902853 - FO converter with SC duplex fiber optic connection (1300 nm), for converting 10/100Base-T(X) to multi-mode fiberglass (50/125 µm). Auto negotiation and auto MDI(X) function. Comprehensive link diagnostics. DIN-rail mountable, 18 ... 30 V DC supply.
2902854 - FO converter with B-FOC (ST®) fiber optic connection (1300 nm), for converting 10/100Base-T(X) to multi-mode fiberglass (50/125 µm). Auto negotiation and auto MDI(X) function. Comprehensive link diagnostics. DIN-rail mountable, 18 ... 30 V DC supply.- 2702944 - FO converter, for converting 100Base-T to polymer and PCF fiber (660 nm), SC-RJ FO connection (PROFINET standard), can be mounted on a DIN rail, 24 V DC supply
2902658 - FO converter (replacement device A), for full duplex transmission from 10/100Base-T(X) to individual simplex fiberglass with WDM (wavelength division multiplex) technology, SC simplex fiber optic connection (1310/1550 nm). Device set (type A and type B) required for operation.
2902659 - FO converter (replacement device B), for full duplex transmission from 10/100Base-T(X) to individual simplex fiberglass with WDM (wavelength division multiplex) technology, SC simplex fiber optic connection (1550/1310 nm). Device set (type A and type B) required for operation.
2902660 - FO converter set, consisting of type A devices and type B devices, for full duplex transmission from 10/100Base-T(X) to individual simplex fiberglass with WDM (wavelength division multiplex) technology. SC simplex fiber optic connection (1550/1310 nm).
2313164 - Ethernet T-coupler for converting from 2x RJ45 to 2x SC-RJ FO, 660 nm, 100 m distance with HCS fiber, for all network structures, redundancy with RSTP + FRD, configuration with WBM, IGMP snooping, multicast filtering, VLAN, SNMP, and port mirroring integrated.