The figure shows the versions with screw connection
2981127
Official DistributorSKU
PHX2981127
MPN
PSR-SPP-24-230UC/ESAM4/3X1/1X2
Weight
0.411 kg
Series PSR-SPP
PSR-SPP-24-230UC/ESAM4/3X1/1X2 - Safety relays
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V AC/DC ... 230 V AC/DC, plug-in Push-in terminal block
- With inrush current reduction, therefore suitable for coupling to failsafe controllers (PSR-ESP4)
- 1- and 2-channel control
- With wide-range input (PSR-ESAM4/3X1)
Technical Specifications
Utilization restriction
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
Product properties
| Product family | PSRclassic |
| Application | Emergency stop |
| Application | Safety door |
| Application | Light grid |
| Mechanical service life | approx. 10⁷ cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
Electrical properties
| Maximum power dissipation for nominal condition | 2.88 W |
| Nominal operating mode | 100% operating factor |
Air clearances and creepage distances between the power circuits
| Rated Insulation Voltage | 250 V AC |
| Rated surge voltage/insulation | 6 kV/safe isolation, reinforced insulation and 6 kV between input circuits and output contact current paths (13/14, 23/24, 33/34), as well as between output contact current paths (13/14, 23/24, 33/34). |
General
| Input voltage range | 24 V AC/DC ... 230 V AC/DC |
| Input voltage range in reference to UN | 0.85 ... 1.1 |
| Typical input current at UN | 120 mA (at 24 V DC) |
| Typical input current at UN | 20 mA (at 120 V AC) |
| Typical input current at UN | 10 mA (for 230 V AC) |
| Voltage at input/start and feedback circuit | approx. 24 V DC |
| Typical response time | 50 ms (manual start) |
| Typical response time | 60 ms (automatic start) |
| Typ. starting time with Us | 500 ms (when controlled via A1) |
| Typical release time | 20 ms (when controlled via S11/S12 and S21/S22) |
| Typical release time | 50 ms (at 24 V DC) |
| Typical release time | 110 ms (at 120 V AC) |
| Typical release time | 280 ms (for 230 V AC) |
| Concurrence | ∞ |
| Recovery time | 1 s |
| Maximum switching frequency | 0.5 Hz |
| Protective circuit | Surge protection; Suppressor diode and varistors |
| Max. permissible overall conductor resistance | 11 Ω |
| Operating voltage display | 1 x green LED |
| Status display | 2 x green LEDs |
Output data
| Contact switching type | 3 enabling current paths |
| Contact switching type | 1 signaling current path |
| Contact Material | AgSnO2, + 0.2 µm Au |
| Maximum Switching Voltage | 250 V AC/DC |
| Minimum Switching Voltage | 10 V AC/DC |
| Limiting Continuous Current | 6 A (N/O contact / N/C contact) |
| Maximum Inrush Current | 6 A |
| Inrush current, minimum | 10 mA |
| Sq. Total current | 50 A2 (ITH2 = I12 + I22 + ... + IN2) |
| Interrupting rating (ohmic load) max. | 192 W (24 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 384 W (48 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 80 W (110 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 66 W (220 V DC, τ = 0 ms) |
| Interrupting rating (ohmic load) max. | 2000 VA (250 V AC, τ = 0 ms) |
| Maximum interrupting rating (inductive load) | 48 W (24 V DC, τ = 40 ms) |
| Maximum interrupting rating (inductive load) | 48 W (48 V DC, τ = 40 ms) |
| Maximum interrupting rating (inductive load) | 48 W (110 V DC, τ = 40 ms) |
| Maximum interrupting rating (inductive load) | 48 W (220 V DC, τ = 40 ms) |
| Switching capacity min. | 360 mW |
| Switching capacity (360/h cycles) | 4 A (24 V (DC13)) |
| Switching capacity (360/h cycles) | 4 A (230 V (AC15)) |
| Switching capacity (3600/h cycles) | 2.5 A (24 V (DC13)) |
| Switching capacity (3600/h cycles) | 3 A (230 V (AC15)) |
| Output fuse | 6 A gG NEOZED |
| Output fuse | B6/C4A gL/gG automatic device |
Connection technology
| pluggable | yes |
Conductor connection
| Connection Method | Push-in connection |
| Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross section AWG | 24 ... 16 |
| Stripping length | 8 mm |
Dimensions
| Width | 45 mm |
| Height | 112 mm |
| Depth | 114.5 mm |
Material specifications
| Color | yellow |
Safety data
| Stop category | 0 |
Safety data: EN ISO 13849
| Category | 4 |
| Performance level (PL) | e |
Safety data: IEC 61508 - High demand
| Safety Integrity Level (SIL) | 3 |
Safety data: IEC 61508 - Low demand
| Safety Integrity Level (SIL) | 3 |
Safety data: EN IEC 62061
| Safety Integrity Level (SIL) | 3 |
Ambient conditions
| Degree of Protection | IP54 |
| Degree of Protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient Temperature (Operation) | -20 °C ... 55 °C |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (Operation) | 10 Hz ... 150 Hz, 2g |
Air clearances and creepage distances between the power circuits
| Standards/regulations | DIN EN 50178/VDE 0160 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 2981127?
Proax is an authorized distributor of Phoenix Contact 2981127 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
PSR-SPP-24DC/MXF2/4X1/2X2/B, Multifunctional safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
PSR-SPP-24DC/MXF3/4X1/2X2/B, Multifunctional safety relay for emergency stop, safety doors, and light grid up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
PSR-SPP-24DC/MXF4/4X1/2X2/B, Multifunctional safety relay for emergency stop, safety doors, and light grid up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
PSR-SPP-120UC/URM/5X1/2X2 - Safe coupling relay with force-guided contacts, 5 N/O contacts, 2 N/C contacts, 1-channel, width: 22.5 mm, pluggable Push-in terminal block
PSR-SPP-120UC/ESAM4/3X1/1X2/B, Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 120 V AC/DC, pluggable Push-in terminal block
