The figure shows a version with a screw connection
Official DistributorSKU
MPN
PSR-SPP-42-230UC/URM4/4NO/2NC
Weight
0.206 kg
This product is Not Cancellable/Not Returnable
Series PSR-SPP
PSR-SPP-42-230UC/URM4/4NO/2NC - Extension module
1- or 2-channel contact extension with wide range input, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4, PL e in accordance with EN ISO 13849, plug-in Push-in terminal block, width: 22.5 mm
Technical Specifications
Product properties
| Product family | PSRclassic |
| Application | Extension module |
| Mechanical service life | 10x 106 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
Times
| Typ. starting time with Us | < 100 ms (with Us / when controlled via A1) |
| Typical release time | < 40 ms (Control via A1 at 42 V DC) |
| Typical release time | < 200 ms (Control via A1 at 230 V AC) |
| Recovery time | < 1 s |
Electrical properties
| Maximum power dissipation for nominal condition | 16.1 W (At IL² = 72 A², PTotal max = 1.7 W + 14.4 W) |
| Nominal operating mode | 100% operating factor |
Air clearances and creepage distances between the power circuits
| Rated Insulation Voltage | 250 V AC |
Supply
| Rated control circuit supply voltage US | 42 V AC/DC -15 % / +10 % |
| Rated control circuit supply voltage US | 230 V AC/DC -15 % / +10 % |
| Rated control supply current IS | typ. 35 mA (At 42 V DC) |
| Rated control supply current IS | typ. 15 mA (@ 230 V AC) |
| Power consumption at US | 1.5 W (with DC) |
| Power consumption at US | 1.7 W (with AC) |
| Apparent power | max. 3.5 VA (at US) |
| Inrush Current | < 20 A (Δt = 100 μs at Us) |
| Protective circuit | Surge protection; Suppressor diode and varistors |
Relay: Enabling current paths (13/14, 23/24, 33/34, 43/44)
| Output description | 2 N/O contacts in series, safety-related, floating |
| Number of Outputs | 4 |
| Contact switching type | 4 enabling current paths |
| Contact Material | AgSnO2 |
| Switching voltage | min. 5 V AC/DC |
| Switching voltage | max. 250 V AC |
| Switching capacity | min. 50 mW |
| Inrush Current | min. 10 mA |
| Inrush Current | max. 8 A |
| Switching capacity in accordance with IEC 60947-5-1 | 5 A (AC15) |
| Switching capacity in accordance with IEC 60947-5-1 | 6 A (DC13) |
| Limiting Continuous Current | 6 A (observe derating) |
| Sq. Total current | 72 A2 (observe derating) |
| Switching frequency | max. 0.5 Hz |
| Output fuse | 6 A gL/gG (High demand) |
| Output fuse | 4 A gL/gG (Low demand) |
Relay: Diagnostics contact (51/52)
| Output description | 2 N/O contacts in series, floating |
| Number of Outputs | 1 |
| Contact switching type | 1 confirmation current path |
| Contact Material | AgSnO2 |
| Switching voltage | min. 5 V AC/DC |
| Switching voltage | max. 250 V AC |
| Switching capacity | min. 50 mW |
| Inrush Current | min. 10 mA |
| Inrush Current | max. 6 A |
| Switching capacity in accordance with IEC 60947-5-1 | 1 A (AC15) |
| Switching capacity in accordance with IEC 60947-5-1 | 1 A (DC13) |
| Limiting Continuous Current | 1 A (see to derating) |
| Sq. Total current | 1 A2 (see to derating) |
| Switching frequency | max. 0.5 Hz |
| Output fuse | 1 A (gL/gG) |
Relay: Signaling current path (61/62)
| Output description | 2 N/C contacts in parallel, floating |
| Number of Outputs | 1 |
| Contact Material | AgSnO2 |
| Switching voltage | min. 5 V AC/DC |
| Switching voltage | 250 V AC |
| Switching capacity | min. 50 mW |
| Inrush Current | max. 6 A |
| Switching capacity in accordance with IEC 60947-5-1 | 5 A (AC15) |
| Switching capacity in accordance with IEC 60947-5-1 | 6 A (DC13) |
| Limiting Continuous Current | 6 A (observe derating) |
| Sq. Total current | 36 A2 (observe derating) |
| Switching frequency | max. 0.5 Hz |
| Output fuse | 1 A (gL/gG) |
Connection technology
| pluggable | yes |
Conductor connection
| Connection Method | Push-in connection |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
Signaling
| Operating voltage display | 1 x green LED |
Dimensions
| Width | 22.5 mm |
| Height | 112 mm |
| Depth | 114.5 mm |
Material specifications
| Color (Housing) | yellow (RAL 1018) |
| Housing Material | Polyamide |
Safety data
| Stop category | 0 |
Safety data: EN ISO 13849
| Category | 4 (In conjunction with suitable evaluating device) |
| Performance level (PL) | e (In conjunction with suitable evaluating device) |
Safety data: IEC 61508 - High demand
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Safety data: IEC 61508 - Low demand
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Safety data: EN IEC 62061
| Safety Integrity Level (SIL) | 3 (In conjunction with suitable evaluating device) |
Ambient conditions
| Degree of Protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient Temperature (Operation) | -20 °C ... 55 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (Operation) | 10 Hz ... 150 Hz, amplitude 0.15 mm, 2g |
CE
| Identification | CE-compliant |
Air clearances and creepage distances between the power circuits
| Standards/regulations | IEC 60664-1 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | See derating curve |
| Mounting Position | vertical or horizontal |
Why Proax for Phoenix Contact 2702925?
Proax is an authorized distributor of Phoenix Contact 2702925 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
PSR-SPP-120UC/URM/5X1/2X2 - Safe coupling relay with force-guided contacts, 5 N/O contacts, 2 N/C contacts, 1-channel, width: 22.5 mm, pluggable Push-in terminal block
PSR-SPP-120UC/ESAM4/3X1/1X2/B, Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 120 V AC/DC, pluggable Push-in terminal block
PSR-SPP-24DC/MXF2/4X1/2X2/B, Multifunctional safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
PSR-SPP-24DC/MXF3/4X1/2X2/B, Multifunctional safety relay for emergency stop, safety doors, and light grid up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
PSR-SPP-24DC/MXF4/4X1/2X2/B, Multifunctional safety relay for emergency stop, safety doors, and light grid up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
