Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2981415
The figure shows a version with a screw connection
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
PSR-SPP-120UC/URM/5X1/2X2
Weight
0.196 kg
This product is Not Cancellable/Not Returnable
Series PSR-SPP

PSR-SPP-120UC/URM/5X1/2X2 - Coupling relay

Safe coupling relay with force-guided contacts, 5 N/O contacts, 2 N/C contacts, 1-channel, width: 22.5 mm, pluggable Push-in terminal block

  • Suitable up to category 1, PL c (EN ISO 13849-1), ‍SIL 1 (EN IEC 62061), SIL 1 (IEC 61508)
  • Safe readback due to force-guided signal contact in accordance with EN 50205
  • Easy proof test according to IEC 61508 thanks to integrated signal contact
  • 1 or 2-channel control
  • 5 enabling current paths, 2 confirmation current paths
  • 120 V version
Technical Specifications

Product properties

Product familyPSRclassic
ApplicationSafe switch off
ApplicationHigh demand
ApplicationLow demand
Mechanical service life10x 106 cycles
Relay typeElectromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3

Times

Typ. starting time with Ustyp. 20 ms (with Us when controlled via A1)
Typical release time20 ms (with Us when controlled via A1)
Restart time< 1 s (Boot time)
Recovery time< 500 ms

Electrical properties

Maximum power dissipation for nominal condition8.8 W (at UB = 132 V DC, US = 120 V, IS = 11 mA, n = 1, IL² = 72 A², Rcontact = 0.1 )
Nominal operating mode100% operating factor

Air clearances and creepage distances between the power circuits

Rated Insulation Voltage250 V
Rated Insulation Voltage250 V
Rated surge voltage/insulation4 kV basic insulation (4 kV safe isolation, reinforced insulation between A1/A2, 13/14, 23/24, 33/34 to 43/44, 53/54, 61/62, 71/72)

Supply

Rated control circuit supply voltage US120 V AC/DC -20 % ... +10 %
Rated control supply current IStyp. 11 mA
Power consumption at UStyp. 1.32 W
Inrush Currenttyp. 600 mA (Δt = 200 µs at Us)
Protective circuitSurge protection; Varistor

General

Rated control circuit supply voltage US120 V AC/DC -20 % ... +10 %
Power consumption at UStyp. 1.32 W
Rated control supply current IStyp. 11 mA
Input voltage range19.2 V AC/DC ... 26.4 V AC/DC
Inrush Currenttyp. 600 mA (Δt = 200 µs at Us)
Typ. starting time with Ustyp. 20 ms (when controlled via A1)
Typical release timetyp. 20 ms (when controlled via A1)
Recovery time< 500 ms
Maximum switching frequency0.5 Hz
Protective circuitSurge protection; Varistor
Operating voltage display1 x green LED

Output data

Contact switching type5 enabling current paths
Contact switching type2 confirmation current paths
Contact MaterialAgSnO2
Maximum Switching Voltage230 V AC/DC (Observe the load curve)
Minimum Switching Voltage5 V AC/DC
Limiting Continuous Current6 A (N/O contact)
Limiting Continuous Current3 A (N/C contact)
Maximum Inrush Current6 A
Inrush current, minimum10 mA
Sq. Total current72 A2
Interrupting rating (ohmic load) max.144 W (N/O contact, 24 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.288 W (N/O contact, 48 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.240 W (N/O contact, 60 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.110 W (N/O contact, 110 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.88 W (N/O contact, 220 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.1380 VA (N/O contact, 230 V AC, τ = 0 ms)
Maximum interrupting rating (inductive load)42 W (N/O contact, 24 V DC, τ = 40 ms)
Maximum interrupting rating (inductive load)42 W (N/O contact, 48 V DC, τ = 40 ms)
Maximum interrupting rating (inductive load)42 W (N/O contact, 60 V DC, τ = 40 ms)
Maximum interrupting rating (inductive load)42 W (N/O contact, 110 V DC, τ = 40 ms)
Maximum interrupting rating (inductive load)42 W (N/O contact, 220 V DC, τ = 40 ms)
Switching capacitymin. 50 mW
Switching capacity in accordance with IEC 60947-5-13 A (24 V (DC13))
Switching capacity in accordance with IEC 60947-5-13 A (230 V (AC 15))
Switching capacity (360/h cycles)4 A (24 V (DC13))
Switching capacity (360/h cycles)4 A (230 V (AC15))
Output fuse10 A gL/gG (N/O contact)
Output fuse4 A gL/gG (N/O contact, for low-demand applications)
Output fuse6 A gL/gG (N/C contact)

Relay: Enabling current paths (13/14, 23/24, 33/34, 43/44, 53/54)

Number of Outputs5
Contact switching type5 enabling current paths
Contact MaterialAgSnO2
Switching capacitymin. 50 mW
Inrush Currentmax. 6 A
Switching capacity in accordance with IEC 60947-5-13 A (AC15, 250 V)
Switching capacity in accordance with IEC 60947-5-13 A (DC13, 24 V)
Switching capacity (360/h cycles)4 A (AC15, 250 V)
Switching capacity (360/h cycles)4 A (DC13, 24 V)
Limiting Continuous Current6 A (N/O contact)
Limiting Continuous Current3 A (N/C contact)
Sq. Total current72 A2 (observe derating)
Switching frequencymax. 0.5 Hz
Mechanical service life107 cycles
Interrupting rating (ohmic load) max.144 W (N/O contact, 24 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.288 W (N/O contact, 48 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.240 W (N/O contact, 60 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.110 W (N/O contact, 110 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.88 W (N/O contact, 220 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.1380 W (N/O contact, 250 V AC, τ = 0 ms)
Maximum interrupting rating (inductive load)42 W (N/O contact, 24 V DC, τ = 40 ms)
Maximum interrupting rating (inductive load)42 W (N/O contact, 48 V DC, τ = 40 ms)
Maximum interrupting rating (inductive load)42 W (N/O contact, 60 V DC, τ = 40 ms)
Maximum interrupting rating (inductive load)42 W (N/O contact, 110 V DC, τ = 40 ms)
Maximum interrupting rating (inductive load)42 W (N/O contact, 220 V DC, τ = 40 ms)
Output fuse6 A gL/gG NEOZED (N/C contact)
Output fuse4 A gL/gG NEOZED (N/O contact, low demand)
Output fuse10 A gL/gG NEOZED (N/O contact)

Relay: Confirmation current paths (61/62, 71/72)

Number of Outputs2
Contact switching type2 confirmation current paths
Contact MaterialAgSnO2
Switching capacitymin. 50 mW
Inrush Currentmin. 10 mA
Inrush Currentmax. 6 A
Switching capacity in accordance with IEC 60947-5-13 A (DC13, 24 V)
Switching capacity in accordance with IEC 60947-5-13 A (AC15, 250 V)
Switching capacity (360/h cycles)4 A (DC13, 24 V)
Switching capacity (360/h cycles)4 A (AC15, 250 V)
Limiting Continuous Current6 A (N/O contact)
Limiting Continuous Current3 A (N/C contact)
Sq. Total current72 A2 (see to derating)
Mechanical service life107 cycles

Connection technology

pluggableyes

Conductor connection

Connection MethodPush-in connection
Conductor cross section, rigid0.2 mm² ... 1.5 mm²
Conductor cross section, flexible0.2 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross section AWG24 ... 16
Stripping length8 mm
Tightening torque0.6 Nm

Signaling

Operating voltage display1 x green LED

Dimensions

Width22.5 mm
Height114.5 mm
Depth112 mm

Material specifications

Coloryellow
Housing MaterialPolyamide

Safety data

Stop category0

Safety data: EN ISO 13849

Category1
Performance level (PL)c

Safety data: IEC 61508 - High demand

Safety Integrity Level (SIL)1

Safety data: IEC 61508 - Low demand

Safety Integrity Level (SIL)1

Safety data

Safety Integrity Level (SIL)1

Ambient conditions

Degree of ProtectionIP20
Min. degree of protection of inst. locationIP54
Ambient Temperature (Operation)-20 °C ... 55 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Maximum altitude≤ 2000 m (Above sea level)
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)
Shock15g (In the event of stress caused by shock, contact reactions are possible for up to 2 ms.)
Vibration (Operation)10 Hz ... 150 Hz, 2g (In the event of stress caused by vibration, contact reactions are possible for up to 1 ms.)

CE

CertificateCE-compliant

Air clearances and creepage distances between the power circuits

Standards/regulationsDIN EN 50178

Mounting

Mounting TypeDIN rail mounting
Mounting Positionvertical or horizontal

Why Proax for Phoenix Contact 2981415?

Proax is an authorized distributor of Phoenix Contact 2981415 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended
  • Phoenix Contact2901425
    2901425
    PSR-SPP-120UC/ESAM4/3X1/1X2/B, Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 120 V AC/DC, pluggable Push-in terminal block
  • Phoenix Contact2901429
    2901429
    Safety relays - PSR-SPP-230UC/ESAM4/3X1/1X2/B
  • Phoenix Contact2901431
    2901431
    Safety relays - PSR-SPP-230AC/ESAM2/3X1/1X2/B
  • Phoenix Contact2981127
    2981127
    PSR-SPP- 24-230UC/ESAM4/3X1/1X2 - Emergency stop relay
  • Phoenix Contact2981431
    2981431
    Safety relays - PSR-SPP- 24DC/ESD/5X1/1X2/300
  • Phoenix Contact2903261
    2903261
    PSR-SPP-24DC/MXF4/4X1/2X2/B, Multifunctional safety relay for emergency stop, safety doors, and light grid up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
  • Phoenix Contact2903258
    2903258
    PSR-SPP-24DC/MXF3/4X1/2X2/B, Multifunctional safety relay for emergency stop, safety doors, and light grid up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
  • Phoenix Contact2903255
    2903255
    PSR-SPP-24DC/MXF2/4X1/2X2/B, Multifunctional safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
  • Phoenix Contact2902726
    2902726
    Safety relays - PSR-SPP-24DC/MXF1/4X1/2X2/B
  • Phoenix Contact2903584
    2903584
    Extension module - PSR-SPP-24DC/URML4/3X1/1X2/B
  • Phoenix Contact2963996
    2963996
    Safety relays - PSR-SPP-24UC/ESAM4/8X1/1X2
  • Phoenix Contact2901417
    2901417
    Safety relays - PSR-SPP-42-48UC/ESAM4/3X1/1X2B
  • Phoenix Contact2702925
    2702925
    Extension module - PSR-SPP-42-230UC/URM4/4NO/2NC
  • Phoenix Contact2981965
    2981965
    PSR-SPP- 24UC/URM/5X1/1X2 - Safe coupling relay with force-guided contacts, 5 N/O contacts, 1 N/C contact, width: 22.5 mm, pluggable Push-in terminal block
  • Phoenix Contact2963970
    2963970
    PSR-SPP- 24UC/URM/5X1/2X2 - Safe coupling relay with force-guided contacts, 5 N/O contacts, 2 N/C contacts, 1-channel, width: 22.5 mm, pluggable Push-in terminal block
  • Phoenix Contact2981842
    2981842
    PSR-SPP- 24UC/URM/3X1/3X2 - Safe coupling relay with force-guided contacts, 3 N/O contacts, 3 N/C contacts, width: 22.5 mm, pluggable Push-in terminal block
  • Phoenix Contact2964005
    2964005
    Extension module - PSR-SPP- 24UC/URM4/5X1/2X2
  • Phoenix Contact2981046
    2981046
    Extension module - PSR-SPP- 24UC/URM4/5X1/2X2/B
  • Phoenix Contact2963983
    2963983
    Safety relays - PSR-SPP- 24UC/THC4/2X1/1X2
  • Phoenix Contact2963925
    2963925
    Safety relays - PSR-SPP- 24UC/ESM4/3X1/1X2/B

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability