The figure shows a version with a screw connection
Official DistributorSKU
MPN
PSR-SPP-24DC/URML4/3X1/1X2/B
Weight
0.18 kg
This product is Not Cancellable/Not Returnable
Series PSR-SPP
PSR-SPP-24DC/URML4/3X1/1X2/B - Extension module
1- or 2-channel contact extension for OSSD signals (e.g., light grid), 3 N/O contacts, 1 N/C contact, up to Cat. 4 PL e in accordance with EN ISO 13849, SIL 3 in accordance with EN IEC 62061, pluggable Push-in terminal block, width: 22.5 mm
Technical Specifications
Product properties
| Product family | PSRclassic |
| Application | Extension module |
| Mechanical service life | approx. 107 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
Times
| Typical response time | 125 ms (For Us autostart) |
| Typical release time | 10 ms (on demand via the sensor circuit) |
| Recovery time | 1 s (following demand of the safety function) |
Electrical properties
| Maximum power dissipation for nominal condition | 16.44 W (US = 26.4 V, IL² = 72 A², PTotal max = 2.04 W + 14.4 W) |
| Nominal operating mode | 100% operating factor |
Air clearances and creepage distances between the power circuits
| Rated Insulation Voltage | 250 V |
| Rated surge voltage/insulation | 4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.) |
Digital: Logic (S12, S22)
| Description of the input | safety-related |
| Number of Inputs | 2 |
| Input voltage range "0" signal | 0 V DC ... 5 V DC |
| Input voltage range "1" signal | 20.4 V ... 26.4 V |
| Input current range "0" signal | 0 mA ... 2 mA |
| Inrush Current | max. 110 mA (typically with US, Δt = 3 ms) |
| Filter time | max. 2 ms (Test pulse width low test pulses, at 100 ms test pulse rate) |
| Filter time | No brightness test pulses / high test pulses permitted. |
| Concurrence | ∞ |
| Max. permissible overall conductor resistance | 50 Ω |
| Protective circuit | Suppressor diode |
| Current consumption | 38 mA (typical, at 24 V) |
Relay: Enabling current paths (13/14, 23/24, 33/34)
| Output description | 2 N/O contacts each in series, safety-related, floating |
| Number of Outputs | 3 |
| Contact switching type | 3 enabling current paths |
| Contact Material | AgSnO2 |
| Switching voltage | min. 10 V |
| Switching voltage | max. 250 V AC |
| Switching capacity | min. 100 mW |
| Inrush Current | min. 10 mA |
| Inrush Current | max. 6 A |
| Switching capacity in accordance with IEC 60947-5-1 | 5 A (AC15) |
| Switching capacity in accordance with IEC 60947-5-1 | 6 A (DC13) |
| Limiting Continuous Current | 6 A (Observe derating and load limit curve) |
| Sq. Total current | 72 A2 (observe derating) |
| Switching frequency | max. 0.5 Hz |
| Mechanical service life | 10x 106 cycles |
| Output fuse | 10 A gL/gG |
| Output fuse | 4 A gL/gG (for low-demand applications) |
Relay: Signaling current path (41/42)
| Output description | 2 N/C contacts parallel, non-safety-related, floating |
| Number of Outputs | 1 |
| Contact switching type | 1 signaling current path |
| Contact Material | AgSnO2 |
| Switching voltage | min. 10 V AC/DC |
| Switching voltage | max. 250 V AC |
| Switching capacity | min. 100 mW |
| Inrush Current | min. 10 mA |
| Inrush Current | max. 6 A |
| Switching capacity in accordance with IEC 60947-5-1 | 1.5 A (AC15) |
| Switching capacity in accordance with IEC 60947-5-1 | 2 A (DC13) |
| Limiting Continuous Current | 6 A |
| Sq. Total current | 36 A2 |
| Switching frequency | max. 0.5 Hz |
| Mechanical service life | 10x 106 cycles |
| Output fuse | 6 A gL/gG |
Connection technology
| pluggable | yes |
Conductor connection
| Connection Method | Push-in connection |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross-section AWG | 24 ... 16 |
| Stripping length | 8 mm |
Signaling
| Status display | 2 x green LEDs |
Dimensions
| Width | 22.5 mm |
| Height | 117.5 mm |
| Depth | 114.5 mm |
Material specifications
| Color (Housing) | yellow (RAL 1018) |
| Housing Material | Polyamide |
Safety data
| Stop category | 0 |
Safety data: EN ISO 13849
| Category | 4 |
| Performance level (PL) | e (5 A DC13; 5 A AC15; 8760 switching cycles/year) |
Safety data: IEC 61508 - High demand
| Safety Integrity Level (SIL) | 3 |
Safety data: IEC 61508 - Low demand
| Safety Integrity Level (SIL) | 3 |
Safety data: EN IEC 62061
| Safety Integrity Level (SIL) | 3 |
Ambient conditions
| Degree of Protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient Temperature (Operation) | -20 °C ... 55 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (Operation) | 10 Hz ... 150 Hz, amplitude 0.15 mm, 2g |
CE
| Identification | CE-compliant |
Air clearances and creepage distances between the power circuits
| Standards/regulations | DIN EN 60947-1 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | vertical or horizontal |
Why Proax for Phoenix Contact 2903584?
Proax is an authorized distributor of Phoenix Contact 2903584 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
PSR-SPP-24DC/MXF4/4X1/2X2/B, Multifunctional safety relay for emergency stop, safety doors, and light grid up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
PSR-SPP-24DC/MXF3/4X1/2X2/B, Multifunctional safety relay for emergency stop, safety doors, and light grid up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
PSR-SPP-24DC/MXF2/4X1/2X2/B, Multifunctional safety relay for emergency stop and safety doors up to SIL 3, Cat. 4, PL e, automatically or manually monitored activation, 4 N/O contacts, 3 safety functions, 2 shutdown levels, plug-in spring-cage terminal block
PSR-SPP-120UC/URM/5X1/2X2 - Safe coupling relay with force-guided contacts, 5 N/O contacts, 2 N/C contacts, 1-channel, width: 22.5 mm, pluggable Push-in terminal block
PSR-SPP-120UC/ESAM4/3X1/1X2/B, Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 1- or 2-channel operation, 3 enabling current paths, nominal input voltage: 120 V AC/DC, pluggable Push-in terminal block
PSR-SPP- 24DC/SIM4 - Interface module for connecting several safety sensors or switches with N/C / N/O contacts to the PSR-SDC4 safety relay, plug-in Push-in terminal blocks
PSR-SPP- 24DC/URM4/5X1/2X2 - Single-channel or two-channel contact extension, 5 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4 PL e in accordance with EN ISO 13849 safe isolation, width: 35 mm, pluggable Push-in terminal block
