Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
PSR-SPP- 24DC/URD3/4X1/2X2
Weight
0.233 kg
This product is Not Cancellable/Not Returnable
Series PSR-SPP

PSR-SPP- 24DC/URD3/4X1/2X2 - Extension module

1-channel contact extension with TBUS interface, 4 N/O contacts, 1 N/C contact, 1 confirmation current path, adjustable dropout delay of 0.5 ... 30 s, Cat. 3, PL e in accordance with EN ISO 13849, width: 22.5 mm, pluggable Push-in terminal block

  • Up to Cat. 3/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with EN IEC 62061, SIL 3 in accordance with IEC 61508
  • Each with 4 enabling, 1 signaling, and 1 confirmation current path, all with dropout delay
  • 1-channel control
Technical Specifications

Product properties

Product familyPSRclassic
ApplicationExtension module
Mechanical service lifeapprox. 107 cycles
Relay typeElectromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3

Electrical properties

Maximum power dissipation for nominal condition2.02 W
Nominal operating mode100% operating factor

Air clearances and creepage distances between the power circuits

Rated Insulation Voltage250 V
Rated surge voltage/insulation4 kV / basic isolation (safe isolation, reinforced insulation and 6 kV between input circuit/N/C contacts and enabling current paths).

General

Nominal input voltage UN24 V DC
Input voltage range in reference to UN0.85 ... 1.1
Typical input current at UN84 mA
Typical response time20 ms
Typical release time range0.5 s ... 38 s ±20 % (BG rating to max. 30 s)
Recovery time1 s
Protective circuitSurge protection; Suppressor diode
Protective circuitFuse; PTC resistor
Operating voltage displayGreen LED
Status displayGreen LED

Output data

Contact switching type4 delayed enabling current paths
Contact switching type1 delayed signaling current path
Contact switching type1 delayed confirmation current path
Contact MaterialAgSnO2
Maximum Switching Voltage250 V AC/DC
Minimum Switching Voltage15 V AC/DC
Limiting Continuous Current6 A (N/O contact)
Limiting Continuous Current3 A (N/C contact)
Maximum Inrush Current6 A (N/O contact)
Maximum Inrush Current3 A (N/C contact)
Inrush current, minimum25 mA
Sq. Total current50 A2 (ITH2 = I12 + I22 + I32 + I42)
Interrupting rating (ohmic load) max.114 W (24 V DC, τ = 0 ms, N/C contact 65/66: 72 W)
Interrupting rating (ohmic load) max.288 W (48 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.77 W (110 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.88 W (220 V DC, τ = 0 ms)
Interrupting rating (ohmic load) max.1500 VA (250 V AC, τ = 0 ms, N/C contact 65/66: 750 VA)
Maximum interrupting rating (inductive load)48 W (24 V DC, τ = 40 ms)
Maximum interrupting rating (inductive load)40 W (48 V DC, τ = 40 ms)
Maximum interrupting rating (inductive load)35 W (110 V DC, τ = 40 ms)
Maximum interrupting rating (inductive load)33 W (220 V DC, τ = 40 ms)
Switching capacity min.0.4 W
Switching capacity (360/h cycles)6 A (24 V DC)
Switching capacity (360/h cycles)5 A (230 V AC)
Switching capacity (3600/h cycles)3 A (24 V (DC13))
Switching capacity (3600/h cycles)3 A (230 V (AC15))
Output fuse10 A gL/gG NEOZED (N/O contact)
Output fuse4 A gL/gG NEOZED (N/C contact)

Connection technology

pluggableyes

Conductor connection

Connection MethodPush-in connection
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section flexible0.2 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG24 ... 16
Stripping length8 mm

Dimensions

Width22.5 mm
Height112 mm
Depth114.5 mm

Material specifications

Color (Housing)yellow (RAL 1018)
Housing MaterialPolyamide

Safety data

Stop category1

Safety data: EN ISO 13849

Category3 (In conjunction with suitable evaluating device)
Performance level (PL)e (In conjunction with suitable evaluating device)

Safety data: IEC 61508 - High demand

Safety Integrity Level (SIL)3 (In conjunction with suitable evaluating device)

Safety data: IEC 61508 - Low demand

Safety Integrity Level (SIL)3 (In conjunction with suitable evaluating device)

Safety data: EN IEC 62061

Safety Integrity Level (SIL)3 (In conjunction with suitable evaluating device)

Ambient conditions

Degree of ProtectionIP20
Min. degree of protection of inst. locationIP54
Ambient Temperature (Operation)-20 °C ... 55 °C
Ambient temperature (storage/transport)-40 °C ... 70 °C
Maximum altitudemax. 2000 m (Above sea level)
Max. permissible humidity (storage/transport)75 % (on average, 85% infrequently, non-condensing)
Max. permissible relative humidity (operation)75 % (on average, 85% infrequently, non-condensing)

Air clearances and creepage distances between the power circuits

Standards/regulationsIEC 60664-1

Mounting

Mounting TypeDIN rail mounting
Mounting Positionany
Accessories

Why Proax for Phoenix Contact 2981525?

Proax is an authorized distributor of Phoenix Contact 2981525 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability