Proax
CADEN
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2986106
The figure shows a version with a screw connection
AllRelaysSafety Relays

2986106

Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
PHX2986106
MPN
PSR-SPP- 24DC/TS/SDOR4/4X1
Weight
0.2 kg
This product is Not Cancellable/Not Returnable
Series PSR-SPP

PSR-SPP- 24DC/TS/SDOR4/4X1 - Extension module

PSR-TRISAFE-M relay output extension module with 4 safe relay output contacts (choice of 4 single-channel or 2 two-channel relay contacts), 4 signal outputs; up to SIL 3, Cat. 4/PL e, SIL 3, EN 50156, pluggable Push-in terminal block

Technical Specifications

Product properties

ApplicationPSR-TRISAFE-M extension module

Insulation characteristics: Air clearances and creepage distances between the power circuits

Overvoltage categoryIII
Pollution degree2

Times

Response timemax. 50 ms
Recovery time< 10 s

Electrical properties

Maximum power dissipation for nominal condition3932 mW (up to  40°C ambient temperature, at m = 4, n = 4, Iload = 4 A, Isignal = 50 mA)
Maximum power dissipation for nominal condition1532 mW (up to  55°C ambient temperature, at m = 4, n = 4, Iload = 1 A, Isignal = 50 mA)
Nominal operating mode100% operating factor
InterfacesDIN rail TBUS for connection to the master module, supplied as standard

Air clearances and creepage distances between the power circuits

Rated Insulation Voltage250 V AC
Rated surge voltage/insulation4 kV / basic insulation between output contact current paths (13/14, 23/24, 33/34, 43/44); 6 kV / safe isolation, reinforced insulation between output contact current paths (13/14, 23/24, 33/34, 43/44) and the other circuits

Supply

Rated control circuit supply voltage US18 V DC ... 30 V DC (Incl. all tolerances, incl. residual ripple)
Rated control circuit supply voltage US24 V DC (Electrical supply via PSR-TBUS)
Rated control supply current ISElectrical supply via PSR-TBUS
Rated control supply current IS74 mA (At 24 V DC, relay outputs set)
Rated control supply current IS54 mA (At 24 V DC, relay outputs not set)
Protective circuitYes, within the scope of the operating voltage limits
Status display1 x green LED, 1 x red LED

Output data

Maximum Switching Voltage250 V AC/DC
Maximum Switching Voltage24 V DC
Minimum Switching Voltage5 V AC/DC
Limiting Continuous Current4 A (see derating curve)
Maximum Inrush Current6 A
Inrush current, minimum5 mA
Switching capacity (3600/h cycles)3 A (230 V (AC 15))
Switching capacity (3600/h cycles)5 A (24 V (DC13))
Output fuse6 A gL/gG
Response timemax. 50 ms

Relay

Output descriptionRelay contacts, safety-related N/O contacts
Number of Outputs4 (Single-channel)
Number of Outputs2 (Two-channel, connected in pairs)
Contact switching type4 relay output contacts
Contact MaterialAgSnO2 (From HW03)AgCuNi +0.2 ... 0.4 μm Au (up to HW02)
Switching voltagemin. 12 V AC/DC (from HW 03)
Switching voltagemin. 5 V AC/DC (Up to HW02)
Switching voltagemax. 250 V AC/DC
Switching currentmin. 3 mA (from HW 03)
Switching currentmin. 5 mA (Up to HW02)
Switching capacitymin. 60 mW
Limiting Continuous Current4 A (see to derating)
Mechanical service life10x 10⁶ cycles
Output fuse6 A (gL/gG)
Output fuse4 A (gL/gG for low-demand applications)
Status display4 x green LEDs

Signal

Output descriptionDigital
Number of Outputs4
Voltage24 V DC (Supply via A1/A2)
Limiting Continuous Current50 mA
Protective circuitYes, within the scope of the operating voltage limits
Short-circuit protectionYes

Connection technology

pluggableyes

Conductor connection

Connection MethodPush-in connection
Conductor cross section rigid0.2 mm² ... 1.5 mm²
Conductor cross section, flexible, with ferrule, with plastic sleeve0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross section flexible, with ferrule without plastic sleeve0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG24 ... 16
Stripping length8 mm

Dimensions

Width22.5 mm
Height112 mm
Depth114.5 mm

Material specifications

Coloryellow
Housing MaterialPolyamide PA non-reinforced

Safety data

Stop category0

Safety data: EN ISO 13849

Category1 (1-channel parameterization)
Category4 (2-channel parameterization)
Performance level (PL)c (1-channel parameterization)
Performance level (PL)e (2-channel parameterization)

Safety data: EN 50156

Safety Integrity Level (SIL)max. 3 (Reference IEC 61508)

Safety data: IEC 61508 - High demand

Safety Integrity Level (SIL)1 (1-channel parameterization)
Safety Integrity Level (SIL)3 (2-channel parameterization)

Safety data: IEC 61508 - Low demand

Safety Integrity Level (SIL)1 (1-channel parameterization)
Safety Integrity Level (SIL)3 (2-channel parameterization)

Safety data: EN IEC 62061

Safety Integrity Level (SIL)1 (1-channel parameterization)
Safety Integrity Level (SIL)3 (2-channel parameterization)

Ambient conditions

Degree of ProtectionIP20
Min. degree of protection of inst. locationIP54
Ambient Temperature (Operation)-20 °C ... 55 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C
Maximum altitudemax. 2000 m (See Appendix "Using PSR-TRISAFE modules at altitudes greater than 2000 m above sea level")
Max. permissible humidity (storage/transport)75 % (On average, 85 % occasionally)
Max. permissible relative humidity (operation)75 % (On average, 85 % occasionally)
Shock (operation)10g (Δt = 11 ms, three shocks in each space direction)
Shock (operation)10g (Δt = 16 ms, continuous shock, 1000 shocks in each space direction)
Vibration (Operation)2g
Air pressure (operation)70 kPa ... 108 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)66 kPa ... 108 kPa (up to 3500 m above sea level)

Air clearances and creepage distances between the power circuits

Standards/regulationsDIN EN 50178

Mounting

Mounting TypeDIN rail mounting
Mounting PositionOn horizontal DIN rail

Why Proax for Phoenix Contact 2986106?

Proax is an authorized distributor of Phoenix Contact 2986106 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size1
Recommended
  • Phoenix Contact2986041
    2986041
    Extension module - PSR-SPP- 24DC/TS/SDI8/SDIO4
  • Phoenix Contact2986232
    2986232
    Safety module - PSR-SPP- 24DC/TS/S
  • Phoenix Contact2986025
    2986025
    Safety module - PSR-SPP- 24DC/TS/M
  • Phoenix Contact2981525
    2981525
    Extension module - PSR-SPP- 24DC/URD3/4X1/2X2
  • Phoenix Contact2981745
    2981745
    Extension module - PSR-SPP- 24DC/URD3/4X1/2X2/3
  • Phoenix Contact2981570
    2981570
    PSR-SPP- 24DC/SSM/2X1 - Emergency stop relay
  • Phoenix Contact1442026
    1442026
    PSR-SPP- 24DC/URM4/5X1/2X2 - Single-channel or two-channel contact extension, 5 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4 PL e in accordance with EN ISO 13849 safe isolation, width: 35 mm, pluggable Push-in terminal block
  • Phoenix Contact2981680
    2981680
    Extension module - PSR-SPP- 24DC/URM4/4X1/2X2/B
  • Phoenix Contact2981541
    2981541
    Safety device - PSR-SPP- 24DC/RSM4/4X1
  • Phoenix Contact2981949
    2981949
    PSR-SPP- 24DC/SIM4 - Interface module for connecting several safety sensors or switches with N/C / N/O contacts to the PSR-SDC4 safety relay, plug-in Push-in terminal blocks
  • Phoenix Contact2981499
    2981499
    Safety relays - PSR-SPP- 24DC/SDC4/2X1/B
  • Phoenix Contact2986588
    2986588
    PSR-SPP- 24DC/FSP2/2X1/1X2 - Safe coupling relay for SIL 2 high and low demand applications, coupled digital output signals to the I/O, 2 enabling current paths, 1 signal contact, module for safe state off applications, integrated test pulse filter, width: 17.5 mm, pluggable Push-in terminal block
  • Phoenix Contact2986957
    2986957
    PSR-SPP- 24DC/FSP/2X1/1X2 - Safe coupling relay for SIL 3 high and low demand applications, coupled digital output signals to the I/O, 2 enabling current paths, 1 signal contact, module for safe state off applications, integrated test pulse filter, width: 17.5 mm, pluggable Push-in terminal block
  • Phoenix Contact2981981
    2981981
    PSR-SPP- 24DC/FSP/1X1/1X2 - Safe coupling relay for SIL 3 high- and low-demand applications, couples digital output signals to the periphery, one enabling current path, one signal contact, module for safe state off applications, test pulse filter, fuse, plug-in Push-in connection, width: 17.5 mm
  • Phoenix Contact2981156
    2981156
    PSR-SPP- 24DC/ESD/5X1/1X2/ T 1, Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with fixed 1.0 s dropout delay, plug-in spring-cage terminal block
  • Phoenix Contact2981198
    2981198
    PSR-SPP- 24DC/ESD/5X1/1X2/T2 1 or 2-channel safety relay for
  • Phoenix Contact2981237
    2981237
    PSR-SPP- 24DC/ESD/5X1/1X2/ T 3, Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with fixed 3.0 s dropout delay, plug-in spring-cage terminal block
  • Phoenix Contact2981253
    2981253
    PSR-SPP- 24DC/ESD/5X1/1X2/T4 1 or 2-channel safety relay for
  • Phoenix Contact2981279
    2981279
    PSR-SPP- 24DC/ESD/5X1/1X2/ T 5, Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with fixed 5.0 s dropout delay, plug-in spring-cage terminal block
  • Phoenix Contact2981295
    2981295
    PSR-SPP- 24DC/ESD/5X1/1X2/T6 1 or 2-channel safety relay for

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability