Official DistributorSKU
MPN
PSR-SCP- 24UC/ESM4/3X1/1X2/B
Weight
0.192 kg
Series PSR-SCP
PSR-SCP- 24UC/ESM4/3X1/1X2/B - Safety relays
Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e in accordance with EN ISO 13849, 2-channel operation, 3 enabling current paths, nominal input voltage: 24 V DC, plug-in screw terminal block
- Up to Cat. 4/PL e in accordance with EN ISO 13849-1, SIL 3 in accordance with EN IEC 62061, SIL 3 in accordance with IEC 61508
- 2 channel control
- 3 enabling current paths, 1 signaling current path
- Manual and monitored activation
Technical Specifications
Product properties
| Product family | PSRclassic |
| Application | Emergency stop |
| Application | Safety door |
| Mechanical service life | approx. 107 cycles |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
Electrical properties
| Maximum power dissipation for nominal condition | 16.44 W (US = 26.4 V, IL² = 72 A², PTotal max = 2.04 W + 14.4 W) |
| Nominal operating mode | 100% operating factor |
Air clearances and creepage distances between the power circuits
| Rated Insulation Voltage | 250 V |
| Rated surge voltage/insulation | See section “Insulation coordination” |
General
| Rated control circuit supply voltage US | 24 V DC -15 % / +10 % |
| Power consumption at US | typ. 1.68 W (DC) |
| Rated control supply current IS | typ. 70 mA |
| Input voltage range in reference to UN | 0.85 ... 1.1 |
| Typical input current at UN | 70 mA DC |
| Inrush Current | < 3.5 A (Δt = 3 ms at Us) |
| Inrush Current | < 100 mA (Δt = 500 ms, with Us/Ix at S12) |
| Inrush Current | > -100 mA (Δt = 300 ms, with Us/Ix at S22) |
| Inrush Current | < 6 mA (with Us/Ix to S34) |
| Current consumption | typ. 38 mA (S12) |
| Current consumption | typ. -38 mA (S22) |
| Current consumption | typ. 1 mA (with Us/Ix to S34) |
| Voltage at input/start and feedback circuit | approx. 24 V DC |
| Filter time | 5 ms (at A1 in the event of voltage dips at Us) |
| Filter time | No test pulses permitted |
| Typical response time | 100 ms (Monitored/manual start) |
| Typical release time | 20 ms (on demand via the sensor circuit) |
| Typical release time | 45 ms (on demand via A1) |
| Concurrence | ∞ |
| Recovery time | 1 s (following demand of the safety function) |
| Recovery time | < 1 s (Boot time) |
| Protective circuit | Surge protection; Suppressor diode |
| Max. permissible overall conductor resistance | approx. 50 Ω (Input and start circuits at US) |
| Operating voltage display | Green LED |
| Status display | Green LED |
Output data
| Contact switching type | 3 enabling current paths |
| Contact switching type | 1 signaling current path |
| Contact Material | AgSnO2, + 0.2 µm Au |
| Maximum Switching Voltage | 250 V AC |
| Minimum Switching Voltage | 10 V AC/DC |
| Limiting Continuous Current | 6 A (N/O contact) |
| Maximum Inrush Current | 6 A |
| Inrush current, minimum | 10 mA |
| Sq. Total current | 72 A2 (Enabling current paths) |
| Sq. Total current | 36 A2 (Signaling current path 41/42) |
| Interrupting rating (ohmic load) max. | see load limit curve |
| Switching capacity min. | 100 mW |
| Switching capacity in accordance with IEC 60947-5-1 | 6 A (DC13, enabling current paths) |
| Switching capacity in accordance with IEC 60947-5-1 | 5 A (AC15, enabling current paths) |
| Switching capacity in accordance with IEC 60947-5-1 | 2 A (DC13, signaling current paths) |
| Switching capacity in accordance with IEC 60947-5-1 | 1.5 A (AC15, signaling current paths) |
| Output fuse | 10 A gL/gG (Enabling current paths) |
| Output fuse | 4 A gL/gG (Low-demand enabling current paths) |
| Output fuse | 6 A gL/gG (Signaling current path) |
Connection technology
| pluggable | yes |
Conductor connection
| Connection Method | Screw connection |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section AWG | 24 ... 12 |
| Stripping length | 7 mm |
| Screw thread | M3 |
Dimensions
| Width | 22.5 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
Material specifications
| Color (Housing) | yellow (RAL 1018) |
| Housing Material | Polyamide |
Safety data
| Stop category | 0 |
Safety data: EN ISO 13849
| Category | 4 |
| Performance level (PL) | e (5 A DC13; 5 A AC15; 8760 switching cycles/year) |
Safety data: IEC 61508 - High demand
| Safety Integrity Level (SIL) | 3 |
Safety data: IEC 61508 - Low demand
| Safety Integrity Level (SIL) | 3 |
Safety data: EN IEC 62061
| Safety Integrity Level (SIL) | 3 |
Ambient conditions
| Degree of Protection | IP20 |
| Min. degree of protection of inst. location | IP54 |
| Ambient Temperature (Operation) | -20 °C ... 55 °C (observe derating) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Shock | 15g |
| Vibration (Operation) | 10 Hz ... 150 Hz, 2g |
Air clearances and creepage distances between the power circuits
| Standards/regulations | DIN EN 60947-1 |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | See derating curve |
| Mounting Position | vertical or horizontal |
Why Proax for Phoenix Contact 2963776?
Proax is an authorized distributor of Phoenix Contact 2963776 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2981839 - Safe coupling relay with force-guided contacts, 3 N/O contacts, 3 N/C contacts, plug-in screw terminal block, width: 22.5 mm
2981952 - Safe coupling relay with force-guided contacts, 5 N/O contacts, 1 N/C contact, plug-in screw terminal block, width: 22.5 mm
2963747 - Safe coupling relay with force-guided contacts, 5 N/O contacts, 2 N/C contacts, 1-channel, plug-in screw terminal block, width: 22.5 mm
2986711 - Coupling relay for SIL 3 low demand applications, couples digital output signals to the periphery, 1 enabling current path, module for F&G applications, test pulse filter, plug-in screw connection, 17.5 mm width
PSR-SCP- 24DC/ESD/5X1/1X2/ T 1, Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with fixed 1.0 s dropout delay, plug-in screw connection terminal blocks- PSR-SCP- 24DC/ESD/5X1/1X2/ T 3, Safety relay for emergency stop and safety door monitoring up to SIL 3 or Cat. 4, PL e according to EN ISO 13849, automatic or manual activation, 3 N/O contacts, 1 N/C contact, 2 N/O contacts with fixed 3.0 s dropout delay, plug-in screw connection terminal blocks
