Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
IB IL AI 4/EF-2MBD-PAC
Weight
0.257 kg
This product is Not Cancellable/Not Returnable
Series IB-IL-AI

IB IL AI 4/EF-2MBD-PAC - Analog module

Inline, Analog input terminal, Analog inputs: 4, 0 V ... 5 V, -5 V ... 5 V, 0 V ... 10 V, -10 V ... 10 V, 0 mA ... 20 mA, 4 mA ... 20 mA, -20 mA ... 20 mA, connection technology: 2-, 3-, 4-conductor, transmission speed in the local bus: 2 Mbps, degree of protection: IP20, including Inline connectors and marking fields

  • Bus-synchronous provision of input values with very low jitter (< 10 μs)
  • Measured value acquisition with a resolution of 16 bits
  • 4 differential signal inputs
  • Connection of sensors in 2-, 3-, and 4-conductor technology
  • Current ranges: 0 mA ... 20 mA, 4 mA ... 20 mA, ±20 mA
  • Voltage ranges: 0 V ... 10 V, ±10 V, 0 V ... 5 V, ±5 V
  • Short-circuit
  • Diagnostic and status indicators
Technical Specifications

Dimensions

Width48.8 mm
Height135 mm
Depth71.5 mm

Inline local bus

Number of interfaces2
Connection MethodInline data jumper
Transmission Speed2 Mbps

Module

ID code (dec.)223
ID code (hex)DF
Length code (hex)05
Length code (dec)05
Process data channel80 bit
Input address area10 Byte
Output address area10 Byte
Register length96 bit
Required parameter data 28 Byte
Required configuration data 4 Byte

Analog: General

Input nameAnalog inputs
Description of the inputDifferential input, including sensor supply (24 V DC)
Number of Inputs4
A/D conversion timemax. 10 µs
A/D converter resolution16 bit
Connection MethodInline shield connector
Connection technology2-, 3-, 4-conductor
Note regarding the connection technologyshielded
Current Input Signal0 mA ... 20 mA
Current Input Signal4 mA ... 20 mA
Current Input Signal-20 mA ... 20 mA
Input resistance current inputapprox. 110 Ω
Voltage input signal0 V ... 5 V
Voltage input signal-5 V ... 5 V
Voltage input signal0 V ... 10 V
Voltage input signal-10 V ... 10 V
Input resistance of voltage input≥ 300 kΩ
Data formatsIB IL, IB ST, standardized representation, S7 compatible
Limit frequency (3 dB)500 Hz
Measured value resolution16 bits (15 bits + sign bit)
Protective circuitTransient protection; Yes, via arresters
Protective circuitOverload protection; electronic

Product properties

Product familyInline
Typemodular
Scope of deliveryincluding Inline connectors and marking fields
Operating modeProcess data mode with 5 words/1 word PCP
Diagnostics messagesFailure of the internal I/O supply I/O error message sent to the bus coupler
Diagnostics messagesFailure of or insufficient communications power UL I/O error message sent to the bus coupler
Diagnostics messagesI/O error Error message in the process data
Diagnostics messagesUser error Error message in the process data

Insulation characteristics

Overvoltage categoryII (IEC 60664-1, EN 60664-1)
Pollution degree2 (IEC 60664-1, EN 60664-1)

Potentials

Power consumptiontyp. 1140 mW (entire device)
Power consumptionmax. 1420 mW (entire device)

Potentials: Communications power (UL)

Supply Voltage7.5 V DC (via voltage jumper)
Current drawmax. 125 mA
Current drawtyp. 110 mA

Potentials: Supply of analog modules (UANA)

Supply Voltage24 V DC (via voltage jumper)
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 20 mA
Current drawtyp. 13 mA

Potentials: Main circuit supply (UM)

Supply Voltage24 V DC (via voltage jumper)
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 200 mA

Supply:

DesignationSensor supply UiS
Supply Voltage24 V DC (via feed-in from UM)
Current consumptionmax. 50 mA (per channel)

Electrical isolation/isolation of the voltage ranges

Test voltage: 7.5 V supply (bus logic), 24 V supply UANA / I/O500 V AC, 50 Hz, 1 min.
Test voltage: 7.5 V supply (bus logic), 24 V supply UANA / functional ground500 V AC, 50 Hz, 1 min.
Test voltage: I/O/functional ground500 V AC, 50 Hz, 1 min.

Connection technology

Connection nameInline connector

Conductor connection

Connection MethodSpring-cage connection
Conductor cross section rigid0.08 mm² ... 1.5 mm²
Conductor cross section flexible0.08 mm² ... 1.5 mm²
Conductor cross section AWG28 ... 16
Stripping length8 mm

Inline connector

Connection MethodSpring-cage connection
Conductor cross section, rigid0.08 mm² ... 1.5 mm²
Conductor cross section, flexible0.08 mm² ... 1.5 mm²
Conductor cross section AWG28 ... 16
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 55 °C
Degree of ProtectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-25 °C ... 85 °C
Permissible humidity (operation)10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)10 % ... 95 % (non-condensing)

Standards and Regulations

Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

Mounting

Mounting TypeDIN rail mounting
Accessories

Why Proax for Phoenix Contact 2878641?

Proax is an authorized distributor of Phoenix Contact 2878641 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability