Official Distributor
SKU
MPN
QUINT-BUFFER/24DC/20
Weight
1.13 kg
Series QUINT-BUFFER
QUINT-BUFFER/24DC/20 - Buffer module
Buffer module, 24 V DC/20 A, maintenance-free capacitor-based energy storage. Decoupled input and output. In the download area, there is a clearly arranged selection table available with load currents and buffer times, as well as charging times after buffer mode.
Technical Specifications
Input data
Input Voltage | 24 V DC |
Input voltage range | 22.5 V DC ... 30 V DC |
Input voltage range DC | 22.5 V DC ... 30 V DC |
Buffer period | 0.2 s (20 A) |
Buffer period | 4 s (1 A) |
Current consumption | approx. 0.1 A |
Current consumption | 0.6 A (charging process) |
Current consumption | 20.6 A (max.) |
Reverse polarity protection | yes |
Charging delay | no |
Fixed backup threshold | < 22 V DC |
Variable connect threshold | (UIN - 1 V)/0.1 s |
Protective circuit | Transient surge protection; Suppressor diode, 35 V DC |
Output data
Efficiency | > 95 % |
Nominal Output Voltage | 24 V DC (depending on the input voltage) |
Setting range of the output voltage (USet) | 22 V DC ... 28.5 V DC |
Nominal output current (IN) | 20 A |
Output current limit | 27 A (buffer mode) |
Bridging time | 200 ms |
Feedback voltage resistance | < 35 V DC (buffer mode) |
Protection against overvoltage at the output (OVP) | < 35 V DC |
Residual ripple | < 100 mVPP (buffer mode) |
Output Power | 480 W |
Peak switching voltages nominal load | < 100 mVPP (20 MHz) |
Power dissipation | 2.5 W (ready at 27 A) |
Power dissipation | 9.8 W (buffer mode at 27 A) |
Protective circuit | Transient surge protection; Suppressor diode, 35 V DC |
Connection in parallel | yes, for increasing the buffer time and for redundancy |
Connection in series | yes |
Mains operation
Nominal Output Voltage | 24 V DC |
Nominal output current (IN) | 20 A |
Battery operation
Nominal Output Voltage | 24 V DC |
Nominal output current (IN) | 20 A |
Signal: Active (high = buffer module is loaded)
Output description | Power Good |
Maximum Switching Voltage | ≤ 24 V |
Output Voltage | + 24 V |
Continuous load current | ≤ 20 mA |
Energy storage
Charging current | 500 mA |
Nominal capacity | 0.1 Ah |
Charging time | < 27 s |
Memory medium | internal, capacity |
IQ Technology | no |
Input
Connection Method | Screw connection |
Conductor cross section, rigid min. | 0.5 mm² |
Conductor cross section, rigid max. | 16 mm² |
Conductor cross section flexible min. | 0.5 mm² |
Conductor cross section flexible max. | 10 mm² |
Conductor cross section AWG min. | 20 |
Conductor cross section AWG max. | 6 |
Stripping length | 10 mm |
Screw thread | M4 |
Tightening torque, min | 1.2 Nm |
Tightening torque max | 1.5 Nm |
Output
Connection Method | Screw connection |
Conductor cross section, rigid min. | 0.5 mm² |
Conductor cross section, rigid max. | 16 mm² |
Conductor cross section flexible min. | 0.5 mm² |
Conductor cross section flexible max. | 10 mm² |
Conductor cross section AWG min. | 20 |
Conductor cross section AWG max. | 6 |
Stripping length | 10 mm |
Screw thread | M4 |
Tightening torque, min | 1.2 Nm |
Tightening torque max | 1.5 Nm |
Signal
Conductor cross section, rigid min. | 0.2 mm² |
Conductor cross section, rigid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 12 |
Screw thread | M3 |
Tightening torque, min | 0.5 Nm |
Tightening torque max | 0.6 Nm |
Signaling
Types of signaling | LED |
Types of signaling | Active switching output |
Operating voltage display | Green LED |
Signal output: Active (high = buffer module is loaded)
Status display | LED "Power Good", green |
Note on status display | Buffer module is loaded: LED ON |
Electrical properties
Insulation voltage input/output | 1 kV (routine test) |
Insulation voltage input/output | 1 kV (type test) |
Product properties
IQ Technology | no |
MTBF (IEC 61709, SN 29500) | > 500000 h |
Insulation characteristics
Protection class | III |
Degree of pollution | 2 |
Dimensions
Width | 64 mm |
Height | 130 mm |
Depth | 125 mm |
Installation dimensions
Installation distance right/left | 5 mm / 5 mm |
Installation distance top/bottom | 50 mm / 50 mm |
Alternative assembly
Width | 122 mm |
Height | 130 mm |
Depth | 67 mm |
Mounting
Mounting Type | DIN rail mounting |
Assembly instructions | alignable: horizontally 0 mm, vertically 50 mm |
Mounting Position | horizontal DIN rail NS 35, EN 60715 |
Material specifications
Housing Material | Metal |
Type of housing | AluNox (AlMg1) |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | -25 °C ... 70 °C |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Maximum altitude | ≤ 2000 m |
Climatic class | 3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
Vibration (Operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
Vibration (Operation) | 15 Hz ... 150 Hz, 2.3g, 90 min. |
Standards and Regulations
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
Standard - Electrical safety | EN 60950-1/VDE 0805 (SELV) |
Standard – Safety extra-low voltage | EN 60950-1 (SELV) and EN 60204 (PELV) |
Standard - Safe isolation | DIN VDE 0106-101 |
Standard - Safety of transformers | EN 61558-2-17 |
Approvals
Shipbuilding approval | DNV GL (EMC A), ABS |
UL approvals | UL/C-UL listed UL 508 |
UL approvals | UL/C-UL Recognized UL 60950-1 |
UL approvals | UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D |
EMC data
Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
Noise immunity | EN 61000-6-2:2005 |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise emission | EN 55011 (EN 55022) |
Electrostatic discharge
Standards/regulations | EN 61000-4-2 |
Housing | Level 4 |
Contact discharge | 8 kV |
Discharge in air | 15 kV |
Comments | Criterion B |
Electromagnetic HF field
Standards/regulations | EN 61000-4-3 |
Frequency Range | 80 MHz ... 1 GHz |
Test field strength | 10 V/m |
Comments | Criterion A |
Fast transients (burst)
Standards/regulations | EN 61000-4-4 |
Input | 2 kV (level 3 - asymmetrical: conductor to ground) |
Output | 2 kV (level 3 - asymmetrical: conductor to ground) |
Signal | 1 kV (level 2 - asymmetrical: conductor to ground) |
Comments | Criterion B |
Surge voltage load (surge)
Standards/regulations | EN 61000-4-5 |
Input/Output | 0.5 kV (level 1 - asymmetrical: conductor to ground) |
Input/Output/Signal | 0.5 kV (level 1 - symmetrical: conductor to conductor) |
Conducted interference
Standards/regulations | EN 61000-4-6 |
I/O/S | Level 3 |
Frequency Range | 0.15 MHz ... 80 MHz |
Comments | Criterion A |
Voltage | 10 V |
Voltage dips
Standards/regulations | EN 61000-4-11 |
Emitted interference
Standards/regulations | EN 61000-6-3 |
Radio interference voltage in acc. with EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
Emitted radio interference in acc. with EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
Why Proax for Phoenix Contact 2866213?
Proax is an authorized distributor of Phoenix Contact 2866213 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended