Official DistributorSKU
MPN
2320157
Weight
0.878 kg
Series QUINT-DIODE
QUINT-DIODE/12-24DC/2X20/1X40 - Redundancy module
DIN rail diode module 12-24 V DC/2x20 A or 1x40 A. Uniform redundancy up to the consumer.
- Flexible
- Rugged design
- Consistent redundancy up to the load
Technical Specifications
DC operation
| Nominal input voltage range | 12 V DC ... 24 V DC |
| Input voltage range | 10 V DC ... 30 V DC |
| Voltage type of supply voltage | DC |
| Reverse polarity protection | < yes60 V |
| Nominal input current (IN) | 2x 20 A (-25 °C ... 60 °C) |
| Nominal input current (IN) | 1x 40 A (-25 °C ... 60 °C) |
| Maximum current Imax | 2x 30 A (-25 °C ... 40 °C) |
| Maximum current Imax | 1x 60 A (-25 °C ... 40 °C) |
| Transient surge protection | Varistor |
| Voltage drop, input/output | typ. 0.5 V |
| Nominal input voltage range | 12 V DC ... 24 V DC |
| Input voltage range | 10 V DC ... 30 V DC |
| Input voltage range DC | 10 V DC ... 30 V DC |
Output data
| Efficiency | > 97 % |
| Efficiency | > 97 % |
| Nominal Output Voltage | UIn - 0,5 V |
| Nominal output current (IN) | 40 A (Increasing power) |
| Nominal output current (IN) | 20 A (Redundancy) |
| Derating | 60 °C ... 70 °C (2.5 %/K) |
| Power loss nominal load max. | 10 W (IOUT = 20 A) |
| Connection in series | No |
| Derating | 60 °C ... 70 °C 2.5 %/K |
Input
| Connection Method | Screw connection |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section, rigid max. | 6 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 4 mm² |
| Conductor cross section AWG min. | 12 |
| Conductor cross section AWG max. | 10 |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Tightening torque, min | 0.5 Nm |
| Tightening torque max | 0.6 Nm |
Output
| Connection Method | Screw connection |
| Conductor cross section, rigid min. | 0.5 mm² |
| Conductor cross section, rigid max. | 16 mm² |
| Conductor cross section flexible min. | 0.5 mm² |
| Conductor cross section flexible max. | 16 mm² |
| Conductor cross section AWG min. | 10 |
| Conductor cross section AWG max. | 6 |
| Stripping length | 10 mm |
| Screw thread | M4 |
| Tightening torque, min | 1.2 Nm |
| Tightening torque max | 1.5 Nm |
Electrical properties
| Insulation voltage input, output / housing | 1000 V |
Product properties
| Product family | QUINT DIODE |
| MTBF (IEC 61709, SN 29500) | 40000000 h |
| LED | No |
Insulation characteristics
| Protection class | III |
| Degree of pollution | 2 |
Dimensions
| Width | 50 mm |
| Height | 130 mm |
| Depth | 125 mm |
| Horizontal pitch | 2.8 Div. |
Installation dimensions
| Installation distance right/left | 5 mm / 5 mm |
| Installation distance top/bottom | 50 mm / 50 mm |
Mounting
| Mounting Type | DIN rail mounting |
| Assembly instructions | alignable: PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom |
| Mounting Position | horizontal DIN rail NS 35, EN 60715 |
Material specifications
| Flammability rating according to UL 94 (housing / terminal blocks) | V0 |
| Housing Material | Metal |
| Housing Material | Steel sheet, zinc-plated |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 70 °C (> 60 °C Derating: 2,5 %/K) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum altitude | ≤ 5000 m |
| Climatic class | 3K3 (in acc. with EN 60721) |
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
| Vibration (Operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
| Vibration (Operation) | 15 Hz ... 150 Hz, 2.3g, 90 min. |
Standards and Regulations
| Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
| Standard - Electrical safety | EN 60950-1/VDE 0805 (SELV) |
| Standard – Protection against shock currents, basic requirements for protective separation in electrical equipment | EN 50178 |
| Standard – Safety extra-low voltage | IEC 60950-1 (SELV) and EN 60204-1 (PELV) |
| Standard - Safe isolation | DIN VDE 0100-410 |
Approvals
| UL approvals | UL/C-UL listed UL 508 |
| UL approvals | UL/C-UL Recognized UL 60950-1 |
| UL approvals | UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
Conformity/Approvals
| ATEX | II 3 G Ex ec IIC T4 Gc |
| ATEX | DEKRA 20ATEX0041 X |
| IECEx | Ex ec IIC T4 Gc |
| IECEx | IECEx DEK 20.0022X |
EMC data
| Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
| EMC requirements for noise emission | EN 61000-6-3 |
| EMC requirements for noise emission | EN 61000-6-4 |
| EMC requirements for noise immunity | EN 61000-6-1 |
| EMC requirements for noise immunity | EN 61000-6-2 |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Surge voltage load (surge)
| Standards/regulations | EN 61000-4-5 |
| Input | 2 kV (level 3 - asymmetrical: conductor to ground) |
| Input | 1 kV (Level 2 - symmetrical: Conductor to conductor) |
| Output | 2 kV (level 3 - asymmetrical: conductor to ground) |
| Output | 1 kV (Level 2 - symmetrical: Conductor to conductor) |
| Comments | Criterion A |
Surge current load (surge)
| Standards/regulations | EN 61000-4-5 |
| Input | 2 kV (level 3 - asymmetrical: conductor to ground) |
| Input | 1 kV (Level 2 - symmetrical: Conductor to conductor) |
| Output | 2 kV (level 3 - asymmetrical: conductor to ground) |
| Output | 1 kV (Level 2 - symmetrical: Conductor to conductor) |
Emitted interference
| Standards/regulations | EN 61000-6-3 |
| Radio interference voltage in acc. with EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| Emitted radio interference in acc. with EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
Accessories
2938235 - Universal wall adapter for securely mounting the device in the event of strong vibrations. The device is screwed directly onto the mounting surface. The universal wall adapter is attached on the top/bottom.
Why Proax for Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40?
Proax is an authorized distributor of Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | QUINTDIODE1224DC2X201X40 |
| Pack Size | 1 |
Recommended
2320160 - DIN rail diode module 48 V DC/2x20 A or 1x40 A. Uniform redundancy up to the consumer.
2866242 - Uninterruptible power supply 24 V/40 A. In the download area, there is a clearly arranged selection table available with load currents and buffer times, as well as charging times after buffer mode.
2866226 - Uninterruptible power supply 24 V DC/10 A, with integrated 1.3 Ah battery module. In the download area, there is a clearly arranged selection table available with load currents and buffer times, as well as charging times after buffer mode.
2866365 - Battery module, lead AGM, VRLA technology, 24 V DC, 12 Ah. Connection via pin cable lug, 14 mm.
2866349 - Battery module, lead AGM, VRLA technology, 24 V DC, 4 Ah. Connection via pin cable lug.
2866352 - Battery module, lead AGM, VRLA technology, 24 V DC, 7.2 Ah. Connection via pin cable lug, 14 mm.
2866213 - Buffer module, 24 V DC/20 A, maintenance-free capacitor-based energy storage. Decoupled input and output. In the download area, there is a clearly arranged selection table available with load currents and buffer times, as well as charging times after buffer mode.
2320393 - QUINT buffer module with maintenance-free capacitor-based energy storage for DIN rail mounting, decoupled input: 24 V DC, decoupled output: 24 V DC/40 A, with integrated SFB (Selective Fuse Breaking) Technology, including mounted UTA 107 universal DIN rail adapter
1136813 - QUINT AC-USV, IQ Technology, Wall mounting, input: 120 V AC, output: 120 V AC / 2500 VA.
2320173 - Active QUINT redundancy module for DIN rail mounting with Auto Current Balancing ACB technology and monitoring functions, input: 24 V DC, output: 24 V DC/2 x 10 A or 1 x 20 A, including mounted UTA 107/30 universal DIN rail adapter
2320186 - Active QUINT redundancy module for DIN rail mounting with ACB (Auto Current Balancing) Technology and monitoring functions, input: 24 V DC/2x 20 A, output: 24 V DC/1 x 40 A, including mounted UTA 107/30 universal DIN rail adapter
2902879 - Active QUINT redundancy module for DIN rail mounting with ACB (Auto Current Balancing) Technology and monitoring functions, input: 24 V DC/2x 40 A, output: 24 V DC/1 x 80 A, including mounted UTA 107/30 universal DIN rail adapter
2320076 - The fan for QUINT-PS/1AC and .../3AC can be mounted without the need for tools or other accessories. By using the fan, optimum cooling is ensured at high ambient temperatures or if the mounting position is rotated.
2906255 - The redundancy set consists of two QUINT-PS/1AC/24DC/10 power supplies combined with the active QUINT-ORING/24DC/2X10/1X20 redundancy module, so as to guarantee maximum availability of your system.
2906298 - The redundancy set consists of two QUINT-PS/1AC/24DC/10 power supplies combined with the active QUINT-ORING/24DC/2X10/1X20 redundancy module, so as to guarantee maximum availability of your system.
2906256 - The redundancy set consists of two QUINT-PS/1AC/24DC/20 power supplies combined with the active QUINT-ORING/24DC/2X20/1X40 redundancy module, so as to guarantee maximum availability of your system.- 2906299 - The redundancy set consists of 2 QUINT-PS/1AC/24DC/20/CO power supplies combined with the active QUINT-ORING/24DC/2X20/1X40 redundancy module, so as to guarantee maximum availability of your system.
