Official DistributorSKU
MPN
PI-EX-RPSS
Weight
0.103 kg
This product is Not Cancellable/Not Returnable
PI-EX-RPSS - Repeater power supply
Ex i analog input: repeater power supply, HART-transparent. Supplies intrinsically safe 2-conductor measuring transducers installed in the Ex area and transmits the 4 mA ... 20 mA signal to a load in the safe area. 3-way electrical isolation (input/output/supply).
Technical Specifications
Product properties
| No. of channels | 1 |
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Electrical isolation | 3-way isolation |
| Electrical isolation between input and output | yes |
| Maximum power dissipation for nominal condition | < 1.1 W (24 V DC / 20 mA) |
| Maximum power dissipation for nominal condition | < 0.9 W (24 V DC / 20 mA) |
| Step response (10-90%) | < 600 µs (for 4 mA ... 20 mA step) |
| Maximum temperature coefficient | < 0.01 %/K |
| Maximum transmission error | < 0.1 % (of final value) |
| Transmission error, typical | < 0.05 % (of final value) |
Electrical isolation Input/output/power supply
| Rated Insulation Voltage | 300 Vrms |
| Test voltage | 2.5 kV AC (50 Hz, 60 s) |
| Insulation | Safe isolation in accordance with IEC/EN 61010-1 |
Electrical isolation Input/output
| Electrical isolation | 375 V (Peak value in accordance with IEC/EN 60079-11) |
Electrical isolation Input/power supply
| Electrical isolation | 375 V (Peak value in accordance with IEC/EN 60079-11) |
Supply
| Supply Voltage Range | 19.2 V DC ... 30 V DC |
| Max. current consumption | < 60 mA (at 24 V DC) |
| Power dissipation | < 1.1 W (at 24 V DC / 20 mA) |
Signal: Current
| Description of the input | Intrinsically safe |
| Current Input Signal | 4 mA ... 20 mA |
| Transmitter supply voltage | > 16 V (at 20 mA) |
| Transmitter supply voltage | > 15.3 V (at 22.5 mA) |
| Current Output Signal | 4 mA ... 20 mA (active) |
| Current Output Signal | 4 mA ... 20 mA (14 ... 26 V ext. source voltage) |
| Load/Output Load Current Output | < 600 Ω (at 20 mA) |
| Load/Output Load Current Output | < 525 Ω (at 22.5 mA) |
| Output ripple | < 20 mVrms |
| Output behavior in the event of an error | 0 mA (Cable break in the input) |
| Output behavior in the event of an error | ≥ 24 mA (Cable short-circuit in the input) |
Safety data
| Max. output voltage Uo | 25.2 V |
| Max. output current Io | 93 mA |
| Max. output power Po | 590 mW |
| Safety-related maximum voltage Um | 253 V AC |
| IIB: Max. external inductivity Lo / Max. external capacitance Co | 4 mH / 820 nF |
| IIC: Max. external inductivity Lo / Max. external capacitance Co | 2 mH / 107 nF |
Data communication (bypass)
| HART Function | Yes |
| Protocols Supported | HART-transparent |
Signaling
| Status display | Green LED (supply voltage, PWR) |
Dimensions
| Width | 12.4 mm |
| Height | 79 mm |
| Depth | 118.4 mm |
Material specifications
| Color | green (RAL 6021) |
| Flammability rating according to UL 94 | V0 |
| Housing Material | PBT and polyamide PA non-reinforced |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -20 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
CE
| Certificate | CE-compliant |
| Note | and EN 61326 |
ATEX
| Identification | II (1) G [Ex ia Ga] IIC |
| Identification | II (1) D [Ex ia Da] IIIC |
| Identification | II 3 (1) G Ex nA [ia Ga] IIC T4 Gc |
Safety Integrity Level (SIL, IEC 61508)
| Identification | 2 |
EAC Ex
| Identification | [Ex ia Ga] IIC |
| Certificate | RU C-DE.AB72.B.00097/19 |
Standards and Regulations
| Electrical isolation | 3-way isolation |
Why Proax for Phoenix Contact 2865243?
Proax is an authorized distributor of Phoenix Contact 2865243 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Ex i temperature transducer: converts measured values from resistance thermometers installed in the Ex area to a 0/4 mA ... 20 mA signal for driving a non-intrinsically safe load. Freely programmable. 3-way electrical isolation.
Adapter cables in [Eex ia]IIC (Ex) II(1)G for programming PI/Ex-THC(RTD)/I modules (D-SUB 9-pos. on stereo jack connector, 3 m total length)
PI 3-way input isolator, input power-limited (EEX-nL), with configurable input/output, for electrical isolation of analog signals
PI 3-way output isolator, output power-limited (EEX-nL), with configurable output/input, for electrical isolation of analog signals
PI-EX-TB/T - Ex-basic terminal block, with knife disconnection and integrated temperature measurement of the input terminal blocks for cold point compensation
