Official DistributorSKU
MPN
PI-EX-RPSS-I/I
Weight
0.1 kg
PI-EX-RPSS-I/I - Signal isolator
Ex i analog input: Repeater power supply, HART. Feeds intrinsically safe 2- or 3-conductor measuring transducers installed in an Ex area and transmits the 4-20 mA signal to a load in a safe area. Galvanic 3-way isolation (input / output / supply).
Technical Specifications
Notes
| Order information: | The electronics module is plugged into a basic terminal block. |
Product properties
| Application | Analog IN |
| No. of channels | 1 |
Electrical properties
| Step response (10-90%) | < 40 µs |
| Maximum temperature coefficient | < 0.005 %/K |
| Maximum transmission error | ≤ 0.05 % (Of end value (at 20°C)) |
Electrical isolation Input/output
| Electrical isolation | 375 V (Peak value, in acc. with EN 50020) |
Electrical isolation Input/power supply
| Electrical isolation | 375 V (Peak value, in acc. with EN 50020) |
Electrical isolation Output/supply
| Test voltage | 1.5 kV AC (50 Hz, 60 s) |
Supply
| Supply Voltage Range | 20 V DC ... 35 V DC |
| Max. current consumption | 75 mA (at 24 V) |
| Power dissipation | max. 1.3 W (at 24 V) |
Signal
| Description of the input | Current input, intrinsically safe |
| Available Input Sources | 2-conductor measuring transducer 4...20 mA |
| Available Input Sources | 3-conductor measuring transducer 4 ... 20 mA |
| Available Input Sources | Active, fed from the field side, 0/4...20 mA signals |
| Current Input Signal | 4 mA ... 20 mA |
| Transmitter supply voltage | 16.5 V (at 20 mA) |
| Transmitter supply current | ≤ 24 mA |
| Output description | Current output |
| Current Output Signal | 4 mA ... 20 mA |
| Output current with short-circuit | approx. 40 mA (Current limitation) |
| Output current with wire break | 0 mA |
| Load/Output Load Current Output | ≤ 600 Ω |
| Output resistor | > 2 MΩ |
| Output ripple (current) | < 40 µAPP (For 600 Ω) |
Safety data
| Max. output voltage Uo | 28 V |
| Max. output current Io | 93 mA |
| Max. output power Po | 650 W |
| Safety-related maximum voltage Um | 250 V AC |
| IIA: Max. external inductivity Lo / Max. external capacitance Co | 36.02 mH / 2.15 µF |
| IIB: Max. external inductivity Lo / Max. external capacitance Co | 17.72 mH / 0.65 µF |
| IIC: Max. external inductivity Lo / Max. external capacitance Co | 4.3 mH / 0.083 µF |
Data communication (bypass)
| HART Function | Yes |
| Protocols Supported | HART, Honeywell DE, Foxboro (others on request) |
Signaling
| Status display | Green LED (supply voltage) |
Dimensions
| Width | 12.4 mm |
| Height | 145 mm |
| Depth | 147 mm |
Material specifications
| Color | green (RAL 6021) |
| Flammability rating according to UL 94 | V0 |
| Housing Material | PBT and polyamide PA non-reinforced |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | max. -20 °C ... 60 °C (see data sheet) |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
CE
| Certificate | CE-compliant |
ATEX
| Identification | II (1) GD [EEx ia] IIC |
Why Proax for Phoenix Contact 2835011?
Proax is an authorized distributor of Phoenix Contact 2835011 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Ex i analog input: Repeater power supply, HART. Feeds intrinsically safe 2-conductor measuring transducers installed in an Ex area and transmits the 4-20 mA signal to a load in a safe area. Galvanic 3-way isolation (input / output / supply).
Ex i temperature transducer: converts measured values from resistance thermometers installed in the Ex area to a 0/4 mA ... 20 mA signal for driving a non-intrinsically safe load. Freely programmable. 3-way electrical isolation.
Adapter cables in [Eex ia]IIC (Ex) II(1)G for programming PI/Ex-THC(RTD)/I modules (D-SUB 9-pos. on stereo jack connector, 3 m total length)
PI 3-way input isolator, input power-limited (EEX-nL), with configurable input/output, for electrical isolation of analog signals
PI 3-way output isolator, output power-limited (EEX-nL), with configurable output/input, for electrical isolation of analog signals
PI-EX-TB/T - Ex-basic terminal block, with knife disconnection and integrated temperature measurement of the input terminal blocks for cold point compensation
