Official DistributorSKU
MPN
PI-EX-NAM/TO
Weight
0.094 kg
This product is Not Cancellable/Not Returnable
PI-EX-NAM/TO - Signal isolator
Ex i binary input: NAMUR isolation amplifiers. For operating proximity sensors and switches in Ex areas. The binary signals are transmitted to a safe area. Transistor output (active), line fault detection. Electrical isolation.
Technical Specifications
Notes
| Order information: | The electronics module is plugged into a basic terminal block. |
Product properties
| Application | Digital IN |
| No. of channels | 1 |
Electrical properties
| Electrical isolation between input and output | yes |
Electrical isolation Input/output
| Electrical isolation | 375 V (Peak value as per EN 50020 / EN 60079-11) |
Electrical isolation Input/power supply
| Electrical isolation | 375 V (Peak value as per EN 50020 / EN 60079-11) |
Supply
| Supply Voltage Range | 20 V DC ... 30 V DC |
| Max. current consumption | 25 mA |
| Power consumption | max. 0.6 W (24 V) |
Signal: NAMUR
| Description of the input | Intrinsically safe |
| Number of Inputs | 1 |
| Available Input Sources | NAMUR proximity sensors (IEC/EN 60947-5-6) |
| Available Input Sources | Floating switch contacts |
| Available Input Sources | Switch contacts with resistance circuit |
| Switching threshold "0" signal current | < 1.2 mA (blocking) |
| Switching threshold "1" signal, current | > 2.1 mA (conductive) |
| Line fault detection | can be enabled/disabled via switch |
| Non-load voltage | 8.2 V DC ±10 % |
Switching: Transistor
| Configurable/programmable | Can be inverted via slide switch |
| Continuous load current | 100 mA (short-circuit-proof) |
Signal
| Number of Outputs | 1 |
| Max. voltage output signal | UA = UB - 2 V |
| Switching behavior | Can be inverted via slide switch |
| Switching frequency | max. 1.2 kHz (DC) |
Connection data
| Connection Method | Screw connection |
Safety data
| Max. output voltage Uo | 10.6 V |
| Max. output current Io | 33 mA |
| Max. output power Po | 86 mW |
| Safety-related maximum voltage Um | 250 V AC |
| IIA: Max. external inductivity Lo / Max. external capacitance Co | 230 mH / 72 µF |
| IIB: Max. external inductivity Lo / Max. external capacitance Co | 110 mH / 16.2 µF |
| IIC: Max. external inductivity Lo / Max. external capacitance Co | 30 mH / 2.3 µF |
Signaling
| Status display | Green LED (supply voltage) |
| Status display | Yellow LED (status display) |
| Status display | Red LED (line errors) |
Dimensions
| Width | 12.4 mm |
| Height | 79 mm |
| Depth | 118.4 mm |
Material specifications
| Color | green (RAL 6021) |
| Flammability rating according to UL 94 | V0 |
| Housing Material | PBT and polyamide PA non-reinforced |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -20 °C ... 60 °C (see data sheet) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
CE
| Certificate | CE-compliant |
ATEX
| Identification | II (1) G [Ex ia Ga] IIC |
| Identification | II (1) D [Ex ia Da] IIIC |
| Identification | II 3 G Ex nA IIC T4 Gc |
| Certificate | PxCIF07ATEX2835341X |
UL, USA/Canada
| Identification | applied for |
EAC Ex
| Identification | [Ex ia Ga] IIC |
| Certificate | RU C-DE.AB72.B.00097/19 |
Standards
| Standards/regulations | NAMUR recommendation NE 21 |
Why Proax for Phoenix Contact 2835574?
Proax is an authorized distributor of Phoenix Contact 2835574 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
PI-EX-MB/16/D-SUB - Ex motherboard, intrinsically safe, for accommodating 16 PI/Ex-... process interface modules, for assembly on NS 35/7.5 or NS 32
PI-EX-MB/16/3/D-SUB - Ex i motherboard to accept 16 x PI-Ex i isolator modules (PI-Ex-...), three terminal points for the field side for every module, 37-pos. D-SUB pin strip for connection of the signals to the control system level, assembly on NS 32, or NS 35/7.5.
PI-EX-MB/ 8/3/D-9SUB - Ex universal module carrier (motherboard) to hold 3-conductor measuring transducers, intrinsically safe, for max. 8 PI-... modules, for mounting on NS 35/7.5 or NS 32
PI-EX-MB-AI/ 8/FLK14/PLC/KD-S1 - Ex i motherboard to accept 8 x PI-Ex i repeater power supplies, input signal conditioners etc. (PI-EX-...), FLK pin strips for connection to S7-300 analog in cards using system cables, disconnect plug terminal blocks for the field side, assembly on NS 32, or NS 35/7.5.- PI-EX-MB-DI/16/FLK14/PLC/KD-S1 - Ex i motherboard to accept 16 x PI-Ex i NAMUR repeater power supplies (PI-EX-NAM...), FLK pin strips for connection to S7-300 digital in cards using system cables, disconnect plug terminal blocks for the field side, assembly on NS 32, or NS 35/7.5.
PI-EX-MB-S/16-01-2/D-SUB - Ex i motherboard for accommodating 16 x PI-Ex supply, input or output signal conditioner modules. With interface for connecting to HART multiplexer and D-SUB pin strip for connecting the analog signals to the control system level.
PI-EX-ME-RJ - Adapter cable, for programming PI-Ex-ME... modules (D-SUB 25-pos. to western plug, 1.6 m long). Configuration software can be downloaded free of cost from the Download area.
