Official DistributorSKU
MPN
PI-EX-ME-2NAM/COC- 24VDC
Weight
0.181 kg
Series PI-EX-ME
PI-EX-ME-2NAM/COC- 24VDC - Signal isolator
NAMUR switching amplifier, 2-channel, input: intrinsic safety, output: relay, changeover contact, input voltage: 24 V DC supply
Technical Specifications
Product properties
| Application | Digital IN |
| No. of channels | 2 |
Electrical properties
| Limit frequency (3 dB) | 20 Hz (max. switching frequency) |
| Test voltage input/output | 1.5 kV AC (50 Hz, 60 s) |
Electrical isolation Input/output/power supply
| Electrical isolation | 375 V (Peak value, in acc. with EN 50020) |
Supply
| Supply Voltage Range | 20 V DC ... 30 V DC |
| Max. current consumption | < 50 mA (24 V DC) |
| Power consumption | 0.55 W (per channel) |
Signal: NAMUR
| Description of the input | Intrinsically safe |
| Available Input Sources | NAMUR proximity sensors (IEC/EN 60947-5-6) |
| Available Input Sources | Floating switch contacts |
| Available Input Sources | Switch contacts with resistance circuit |
| Switching threshold "0" signal current | < 1.55 mA (blocking) |
| Switching threshold "1" signal, current | > 1.75 mA (conductive) |
| Line fault detection | Can be disconnected by bridging X1, X2 or X5, X6 |
| Non-load voltage | 8.5 V DC |
Switching: Relay
| Configurable/programmable | Can be inverted via a switch in the front of the housing |
| Contact switching type | 1 changeover contact per channel |
| Limiting Continuous Current | 5 A (250 V AC) |
| Limiting Continuous Current | 2 A (100 V DC) |
| Min. switching current | 1 mA |
| Interrupting rating (ohmic load) max. | 100 VA (250 V AC) |
| Interrupting rating (ohmic load) max. | 50 W (100 V DC) |
| Frequency | 20 Hz |
Signal
| Switching behavior | can be inverted via a switch in the front of the housing |
Connection data
| Connection Method | Pluggable screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 14 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
Safety data
| Max. output voltage Uo | 10.5 V |
| Max. output current Io | 26 mA |
| Max. output power Po | 67 mW |
| Safety-related maximum voltage Um | 250 V |
| IIB: Max. external inductivity Lo / Max. external capacitance Co | 160 mH / 16.8 µF |
| IIC: Max. external inductivity Lo / Max. external capacitance Co | 45 mH / 2.41 µF |
Signaling
| Status display | Green LED (supply voltage) |
| Status display | LED yellow (switching state) |
| Status display | Red LED (line errors) |
Dimensions
| Width | 22.5 mm |
| Height | 99 mm |
| Depth | 114.5 mm |
Material specifications
| Color | green (RAL 6021) |
| Flammability rating according to UL 94 | V0 |
| Housing Material | Polyamide PA non-reinforced |
Ambient conditions
| Ambient Temperature (Operation) | -20 °C ... 60 °C |
| Ambient temperature (storage/transport) | -25 °C ... 80 °C |
| Permissible humidity (operation) | ≤ 75 % (annual average) |
| Permissible humidity (operation) | ≤ 95 % (30 days/year, non-condensing) |
CE
| Certificate | CE-compliant |
ATEX
| Identification | II (1)GD |
| Identification | [EEx ia] IIC |
| Certificate | TÜV 00 ATEX 1528 |
UL, USA/Canada
| Identification | cULus |
Standards
| Standards/regulations | NAMUR recommendation NE 21 |
Why Proax for Phoenix Contact 2835493?
Proax is an authorized distributor of Phoenix Contact 2835493 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
PI-EX-ME-RJ - Adapter cable, for programming PI-Ex-ME... modules (D-SUB 25-pos. to western plug, 1.6 m long). Configuration software can be downloaded free of cost from the Download area.
PI-EX-MB/16/D-SUB - Ex motherboard, intrinsically safe, for accommodating 16 PI/Ex-... process interface modules, for assembly on NS 35/7.5 or NS 32
PI-EX-MB/16/3/D-SUB - Ex i motherboard to accept 16 x PI-Ex i isolator modules (PI-Ex-...), three terminal points for the field side for every module, 37-pos. D-SUB pin strip for connection of the signals to the control system level, assembly on NS 32, or NS 35/7.5.
PI-EX-MB-AI/ 8/FLK14/PLC/KD-S1 - Ex i motherboard to accept 8 x PI-Ex i repeater power supplies, input signal conditioners etc. (PI-EX-...), FLK pin strips for connection to S7-300 analog in cards using system cables, disconnect plug terminal blocks for the field side, assembly on NS 32, or NS 35/7.5.- PI-EX-MB-DI/16/FLK14/PLC/KD-S1 - Ex i motherboard to accept 16 x PI-Ex i NAMUR repeater power supplies (PI-EX-NAM...), FLK pin strips for connection to S7-300 digital in cards using system cables, disconnect plug terminal blocks for the field side, assembly on NS 32, or NS 35/7.5.
PI-EX-MB/ 8/3/D-9SUB - Ex universal module carrier (motherboard) to hold 3-conductor measuring transducers, intrinsically safe, for max. 8 PI-... modules, for mounting on NS 35/7.5 or NS 32
PI-EX-MB-S/16-01-2/D-SUB - Ex i motherboard for accommodating 16 x PI-Ex supply, input or output signal conditioner modules. With interface for connecting to HART multiplexer and D-SUB pin strip for connecting the analog signals to the control system level.
