Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
MINI MCR-SL-1CP-I-I
Weight
0.085 kg

Loop-powered isolators - MINI MCR-SL-1CP-I-I

MCR loop-powered isolator, 1-channel, for the electrical isolation of current signals without auxiliary power, with screw connection

  • Voltage drop at isolating amplifier of just 1.7 V
  • Does not require additional auxiliary voltage
  • Supplied by an input loop
  • Two channels on a design width of just 6.2 mm
  • Highly compact 2-conductor passive isolators for the electrical isolation and filtering of standard analog signals
Technical Specifications

Dimensions

Width6.2 mm
Height93.1 mm
Depth101.2 mm

Ambient conditions

Ambient Temperature (Operation)-20 °C ... 65 °C
Ambient temperature (storage/transport)-40 °C ... 85 °C
Maximum altitude≤ 2000 m
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Degree of ProtectionIP20
Noise immunityEN 61000-6-2 When being exposed to interference, there may be minimal deviations.

Input data

DesignationCurrent input
Number of Inputs1
Configurable/programmableno
Current Input Signal0 mA ... 20 mA
Current Input Signal4 mA ... 20 mA
Max. input voltage18 V
Max. input current40 mA
Response currentapprox. 190 µA
Input voltage limitation< 2 V (20 mA)
Voltage dissipation1.9 V (I = 20 mA)

Output data

Output nameCurrent output
Number of Outputs1
Configurable/programmableno
Current Output Signal0 mA ... 20 mA
Current Output Signal4 mA ... 20 mA
Load/Output Load Current Output< 600 Ω (at I = 20 mA output signal)
Ripple< 10 mVrms (at 600 Ω)
Transmission Behavior1:1 to input signal

Power supply

Supply Voltage Rangeno separate supply voltage necessary
Power consumption34 mW

Connection data

Connection MethodScrew connection
Stripping length12 mm
Screw threadM3
Conductor cross section solid0.2 mm² ... 2.5 mm²
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section AWG26 ... 12

General

No. of channels1
Maximum transmission error≤ 0.1 % (of final value)
Maximum temperature coefficient≤ 0.002 %/K (of measured value / 100 Ω load)
Temperature coefficient, typical< 0.002 %/K (of measured value / 100 Ω load)
Cold junction errors
Typical cold point errors
Additional error, load-dependent< 0.03 % (of measured value / 100 Ω load)
Limit frequency (3 dB)75 Hz
Step response (10-90%)5 ms (at 600 Ω load)
Signal transmission behaviorIn = Out
Electrical isolationBasic insulation according to EN 61010
Overvoltage categoryII
Degree of pollution2
Rated Insulation Voltage50 V AC/DC
Test voltage input/output1.5 kV (50 Hz, 1 min.)
Test voltage channel/channel1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibilityConformance with EMC directive
Noise emissionEN 61000-6-4
Noise immunityEN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Housing MaterialPBT
Mounting Positionany
Assembly instructionsThe T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 2

EMC data

DesignationElectromagnetic RF field
Standards/regulationsEN 61000-4-3
Evaluation criterionA
DesignationFast transients (burst)
Standards/regulationsEN 61000-4-4
Evaluation criterionB
DesignationConducted interferences
Standards/regulationsEN 61000-4-6
Evaluation criterionA

Standards and Regulations

Electromagnetic compatibilityConformance with EMC directive
Noise emissionEN 61000-6-4
Standards/regulationsEN 61000-4-2
DesignationElectromagnetic RF field
Standards/regulationsEN 61000-4-3
Evaluation criterionA
Standards/regulationsEN 61000-4-4
Standards/regulationsEN 61000-4-5
DesignationConducted interferences
Standards/regulationsEN 61000-4-6
Evaluation criterionA
Electrical isolationBasic insulation according to EN 61010

Conformance/approvals

DesignationCE
CertificateCE-compliant
DesignationUKCA
CertificateUKCA-compliant
DesignationUL, USA / Canada
IdentificationUL 508 Recognized
IdentificationClass I, Div. 2, Groups A, B, C, D
DesignationShipbuilding approval
CertificateDNV GL TAA00000BW
TemperatureB
HumidityB
VibrationB
EMCB
EnclosureA

Environmental Product Compliance

China RoHSEnvironmentally Friendly Use Period = 50 years
China RoHSFor details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Accessories

Why Proax for Phoenix Contact 2864419?

Proax is an authorized distributor of Phoenix Contact 2864419 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Available for order

Phoenix Contact Availability