Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
AXL E IOL DO8 M12 6P
Weight
0.297 kg
This product is Not Cancellable/Not Returnable

AXL E IOL DO8 M12 6P - Digital module

Axioline E, Digital output device, IO-Link ports Class B: 1, connection method: M12 connector, A-coded, connection technology: 5-conductor, Digital outputs: 8, 24 V DC, 500 mA, connection technology: 3-conductor, Plastic housing, degree of protection: IP65/IP67

  • Connection to an IO-Link master with M12 connector (A-coded, 4-pos.)
  • Type B port with additional power supply
  • IO-Link specification V1.1.2
  • Connection up to 8 outputs with M12 connectors (A-coded, 5-pos.)
  • Diagnostic and status indicators
  • Short-circuit and overload protection of the sensor supply
  • Device rating plate stored
  • IP65/IP67 degree of protection
Technical Specifications

Dimensions

Width60 mm
Height141 mm
Depth20 mm
Note on dimensionsThe height is 170 mm including fixing clips. The depth is 30 mm including the connector.

Utilization restriction

EMC noteEMC: class A product, see manufacturer's declaration in the download area

Material specifications

Housing MaterialPocan®
Coloranthracite grey RAL 7016

IO-Link

Number of Ports1
Connection MethodM12 connector, A-coded
Connection technology5-conductor
Port TypeClass B
SpecificationV1.1.2
Reverse polarity protectionyes
Transmission Speed230.4 kbps (COM3)
Cycle Time< 1 ms
Process data update< 1 ms
Amount of Process Data16 bit (Output data)

Digital:

Output nameDigital outputs
Connection MethodM12 connector
Connection technology3-conductor
Number of Outputs8
Protective circuitOverload protection, short-circuit protection of outputs; Electronic
Output Voltage24 V DC
Limitation of the voltage induced on circuit interruption-28 V ... -15 V
Output Currentmax. 500 mA (per port)
Output Currentmax. 4 A (per device)
Nominal Output Voltage24 V DC (from voltage UA)
Load min.10 kΩ
Output voltage when switched offmax. 1 V
Output current when switched offmax. 300 µA
Nominal load, inductivemax. 12 VA (1.2 H, 48 Ω, with nominal voltage)
Nominal load, lampmax. 12 W (at nominal voltage)
Nominal load, ohmicmax. 12 W (48 Ω, with nominal voltage)
Switching frequencymax. 1000 per second
Switching frequencymax. 1 per second (with inductive load)
Switching frequencymax. 16 per second (with nominal lamp load)
Reverse voltage resistance to short pulseslimited protection up to 0.5 A for 1 s
Behavior with overloadAuto restart
Behavior with inductive overloadOutput can be destroyed
Signal delaymax. 100 µs (when switched on)
Signal delaymax. 100 µs (when switched off, with at least 50 mA load current)
Overcurrent shut-downas of 0.7 A
Output current with ground connection interrupt when switched off< 1 mA

Product properties

Product familyAxioline E
TypeStand-Alone
Special PropertiesPlastic housing

Supply: IO-Link

DesignationIO-Link port supply (L+)
Nominal voltage for I/O supply24 V DC (Provided via the IO-Link interface of the IO-Link master.)
Supply Voltage Range20 V DC ... 30 V DC (including all tolerances, including ripple)
Nominal current per deviceapprox. 15 mA
Permissible cable lengthmax. 20 m
Protective circuitReverse polarity protection; yes

Supply: Actuators

DesignationSupply of actuators (UA)
Supply Voltage24 V DC (Nominal voltage)
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current consumptionmax. 500 mA (per port)
Current consumptionmax. 4 A (Device dependent; observe the current of the IO-Link master that is made available via UA.)

Electrical isolation/isolation of the voltage ranges

Test voltage: 24 V supply (logic supply)/24 V supply (actuator supply)500 V AC, 50 Hz, 1 min.
Test voltage: 24 V supply (logic supply) / FE500 V AC, 50 Hz, 1 min.
Test voltage: 24 V supply (actuator supply)/FE500 V AC, 50 Hz, 1 min.

Connection data

Connection MethodM12 connector
Note on the connection methodin accordance with IEC 61076-2-101, M12 connection technology

Ambient conditions

Ambient Temperature (Operation)-25 °C ... 60 °C
Degree of ProtectionIP65/IP67
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-25 °C ... 70 °C
Permissible humidity (operation)5 % ... 95 %
Permissible humidity (storage/transport)5 % ... 95 %

Standards and Regulations

Protection classIII (IEC 61140, EN 61140, VDE 0140-1)

Mounting

Mounting TypeWall mounting

Why Proax for Phoenix Contact 2702659?

Proax is an authorized distributor of Phoenix Contact 2702659 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Available for order

Phoenix Contact Availability