Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
Weight
0.27 kg

AXL F PSDOR4/2 1F - Module de sécurité

Axioline F, Module à relais, Sécurité fonctionnelle, PROFIsafe, destiné uniquement au raccordement sur des contrôleurs Phoenix Contact ou Siemens, Entrées de signalisation: 2, Sorties OUT24V_0 et OUT24V_1: 2, Sorties de relais sécurisées: 4 (indépendant du potentiel), Contact NO, indice de protection: IP20

Technical Specifications

Dimensions

Width53.6 mm
Height126.1 mm
Depth54 mm
Note on dimensionsHousing dimensions

Axioline F local bus

Connection MethodBus base module

Module

Input address area5 Byte
Output address area6 Byte
Required parameter data 20 Byte ((I-and F-parameters))
Required configuration data 10 Byte

Digital:

Input nameSignal inputs
Number of Inputs2
Input VoltagePower supply from clock outputs UT1 and UT2
Nominal input current at UINtyp. 3.2 mA
Output nameOutputs OUT24V_0 and OUT24V_1
Number of Outputs2
Nominal Output VoltagePower supply from U0 or U1

Relay

Number of Outputs4 (floating)
Contact switching typeN/O contact
Switching voltagemin. 12 V AC/DC
Switching voltagemax. 30 V AC/DC
Switching currentmin. 3 mA
Switching currentmax. 6 A (30 V DC)
Switching capacitymin. 60 mW
Limiting Continuous Current6 A
Mechanical service life10x 106 cycles
Output fuse6 A gL/gG (See “Application examples” section)

Product properties

Product familyAxioline F
ApplicationFunctional safety
ApplicationPROFIsafe
Applicationonly for connection to Phoenix Contact or Siemens controller
Typemodular
Mounting Positionany
Operating modePROFIsafe 2.4, PROFIsafe 2.6.1

Insulation characteristics

Overvoltage categoryII (IEC 60664-1)
Pollution degree2 (IEC 60664-1)

Electrical properties

Maximum power dissipation for nominal condition6.255 W
Transmission mediumCopper

Potentials

Protectionmax. 500 mA slow-blow (for UI)
Protectionmax. 6 A gL/gG ()
Protective circuitPolarity reversal protection of the supply voltage; parallel protection against polarity reversal for a limited period of time
Protective circuitSurge voltage detection; at 31 V
Protective circuitUndervoltage detection; at 17 V
Protective circuitSurge protection of the supply voltage; electronic (35 V, 0.5 s)

Potentials: Axioline F local bus supply (UBus)

Supply Voltage5 V DC (via bus base module)
Current drawmax. 163 mA (at UBus 5 V DC)
Current drawtyp. 93 mA (at UBus 5 V DC)

Potentials: Supply voltage UI for EDM

Supply Voltage24 V DC
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 30 mA
Current drawtyp. 10 mA (Power supply from UI with 30 V DC, all inputs set)

Potentials: Feed-in U0 and U1 for safe I/O supply

Supply Voltage24 V DC
Supply Voltage Range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 6 A
Current drawtyp. 1.6 mA (Power supply from U0 with 30 V DC, all inputs set without load)

Connection technology

Connection nameI/O
Note on the connection methodNote the specification in the section Conductor cross sections, and stripping and insertion lengths.

Conductor connection

Connection MethodPush-in connection
Conductor cross section rigid0.5 mm² ... 1.5 mm²
Conductor cross section flexible0.5 mm² ... 1.5 mm²
Conductor cross section AWG20 ... 16
Stripping length8 mm

I/O

Connection MethodPush-in connection
Note on the connection methodNote the specification in the section Conductor cross sections, and stripping and insertion lengths.
Conductor cross section, rigid0.5 mm² ... 1.5 mm²
Conductor cross section, flexible0.5 mm² ... 1.5 mm²
Conductor cross section AWG20 ... 16
Stripping length8 mm

Ambient conditions

Ambient Temperature (Operation)-35 °C ... 60 °C
Degree of ProtectionIP20
Degree of protection at installation locationmin. IP54
Air pressure (operation)70 kPa ... 108 kPa
Air pressure (storage/transport)66 kPa ... 108 kPa
Ambient temperature (storage/transport)-40 °C ... 85 °C

Standards and Regulations

Protection classIII (IEC 61140-1)

Air clearances and creepage distances

Air clearances and creepage distancesIEC 60664-1

Mounting

Mounting TypeDIN rail mounting
Mounting Positionany

Why Proax for Phoenix Contact 2702858?

Proax is an authorized distributor of Phoenix Contact 2702858 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability