Official Distributor
SKU
Weight
0.182 kg
This product is Not Cancellable/Not Returnable
AXL F SSI1 AO1 1H - Function module
Axioline F function module, 1 SSI interface for absolute encoder, 1 analog output: 0 - 10 V, ±10 V, 0 - 5 V, ±5 V, 0 - 20 mA, 4 - 20 mA, ±20 mA, 2-conductor connection technology (including bus base module and connectors)
- Permanent surge protection against 24 V DC for all interfaces
- Permanent short-circuit protection for all interfaces
- Device rating plate stored
- 1 SSI interface
- Monitoring of the 24 V encoder supply
- Supports transmission speeds from 62.5 kHz to 2 MHz for SSI
- 8 -bit ... 56 -bit resolution
- Supports Gray and binary code
- 1 analog, bipolar output channel for the connection of either voltage or current signals
- Connection of actuators in 2-conductor technology
- Voltage ranges: 0 V ... 10 V, ±10 V, 0 V ... 5 V, ±5 V
- Current ranges: 0 mA ... 20 mA, 4 mA ... 20 mA, ±20 mA
Technical Specifications
Dimensions
Width | 35 mm |
Height | 126.1 mm |
Depth | 54 mm |
Note on dimensions | The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). |
Axioline F local bus
Number of interfaces | 2 |
Connection Method | Bus base module |
Transmission Speed | 100 Mbps |
Module
ID code (hex) | none |
Input address area | 12 Byte |
Output address area | 12 Byte |
Required parameter data | 29 Byte |
Required configuration data | 7 Byte |
Encoder
Number of Inputs | 1 |
Input name | SSI interface |
Description of the input | RS-422 interface in accordance with SSI specification |
Encoder signals | Single-turn and multi-turn encoder, length measuring sticks |
Input Frequency | to 2 MHz (Can be parameterized: 62.5 kHz, 125 kHz (default), 250 kHz, 500 kHz, 1 MHz, 2 MHz) |
Parity | Even, odd or no parity |
Transmission frequency | 2.00 MHz |
Adjustable resolution | 8 ... 56 bit |
Encoder supply voltage | 24 V DC (UI - 0.5 V) |
Analog:
Output name | Analog outputs |
Connection Method | Push-in connection |
Connection technology | 2-conductor (shielded, twisted pair) |
Number of Outputs | 1 |
D/A conversion time | 5 µs |
D/A converter resolution | 16 bit |
Protective circuit | Surge protection; Electronic (35 V, permanent) |
Protective circuit | Short-circuit and overload protection; electronic |
Protective circuit | Transient protection; Suppressor diode |
Data formats | IB IL, S7-compatible, standardized representation |
Measured value representation | 16 bits |
Representation of output values | 16 bits (15 bits + sign) |
Current Output Signal | 0 mA ... 20 mA |
Current Output Signal | 4 mA ... 20 mA |
Current Output Signal | -20 mA ... 20 mA |
Load/Output Load Current Output | max. 500 Ω |
Voltage output signal | 0 V ... 5 V |
Voltage output signal | -5 V ... 5 V |
Voltage output signal | 0 V ... 10 V |
Voltage output signal | -10 V ... 10 V |
Load/output load voltage output | > 2 kΩ |
Permissible cable length | max. 250 m |
Product properties
Product family | Axioline F |
Type | block modular |
Mounting Position | any (no temperature derating) |
Scope of delivery | including bus base module and Axioline F connectors |
Special Properties | Analog output: 1 |
Insulation characteristics
Overvoltage category | II (IEC 60664-1, EN 60664-1) |
Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
Encoder
Nominal Output Voltage | 24 V DC (UI - 0.5 V) |
Voltage range | 19.5 V DC ... 30 V DC (including all tolerances, including ripple) |
Current carrying capacity | max. 500 mA |
Protective circuit | Surge protection; electronic (35 V, 0.5 s) |
Protective circuit | Short-circuit/overload protection; electronic |
Protective circuit | Transient protection; Shielding |
Potentials: Axioline F local bus supply (UBus)
Supply Voltage | 5 V DC (via bus base module) |
Current draw | max. 140 mA |
Power consumption | max. 0.7 W |
Potentials: Feed-in of supply voltage (UI)
Supply Voltage | 24 V DC |
Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
Current draw | max. 60 mA (Supply of the SSI interface and the analog output (20 mA), without sensor supply) |
Power consumption | max. 1.4 W (Supply of the SSI interface and the analog output (20 mA), without sensor supply) |
Protective circuit | Surge protection; electronic (35 V, 0.5 s) |
Protective circuit | Reverse polarity protection; Polarity protection diode |
Protective circuit | Transient protection; Suppressor diode |
Electrical isolation/isolation of the voltage ranges
Test voltage: Logic | 500 V AC, 50 Hz, 1 min. |
Test voltage: SSI I/O (24 V supply) | 500 V AC, 50 Hz, 1 min. |
Test voltage: Functional ground | 500 V AC, 50 Hz, 1 min. |
Test voltage: Analog I/O | 500 V AC, 50 Hz, 1 min. |
Connection technology
Connection name | Axioline F connector |
Note on the connection method | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
Conductor connection
Connection Method | Push-in connection |
Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
Conductor cross section AWG | 24 ... 16 |
Stripping length | 8 mm |
Axioline F connector
Connection Method | Push-in connection |
Note on the connection method | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² |
Conductor cross section AWG | 24 ... 16 |
Stripping length | 8 mm |
Ambient conditions
Ambient Temperature (Operation) | -25 °C ... 60 °C |
Degree of Protection | IP20 |
Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Standards and Regulations
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting
Mounting Type | DIN rail mounting |
Mounting Position | any (no temperature derating) |
Accessories
Why Proax for Phoenix Contact 2688433?
Proax is an authorized distributor of Phoenix Contact 2688433 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended
- 1035430 - Axioline F, Temperature recording module, Analog inputs: 4 (for resistance temperature detectors), connection technology: 2-, 3-, 4-conductor (shielded), transmission speed in the local bus: 100 Mbps, Extreme conditions version, degree of protection: IP20, including bus base module and Axioline F connectors
- 2701235 - Axioline F, Temperature recording module, Analog inputs: 8 (for resistance temperature detectors), connection technology: 2-, 3-, 4-conductor (shielded), transmission speed in the local bus: 100 Mbps, Extreme conditions version, degree of protection: IP20, including bus base module and Axioline F connectors
- 2702120 - Axioline F, Temperature recording module, Analog inputs: 8 (for resistance temperature detectors), connection technology: 2-, 4-conductor (shielded), transmission speed in the local bus: 100 Mbps, measuring dynamics up to 8 Hz, degree of protection: IP20, including bus base module and Axioline F connectors
- 2688598 - Axioline F, Temperature recording module, Analog inputs: 4 (4 inputs for thermocouples or linear voltage, plus 1 input -5 V to +5 V), connection technology: 2-conductor (shielded, twisted pair), transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors
- 2688417 - Axioline F, Temperature recording module, Analog inputs: 8 (8 inputs for thermocouples or linear voltage, plus 1 input -5 V to +5 V), connection technology: 2-conductor (shielded, twisted pair), transmission speed in the local bus: 100 Mbps, degree of protection: IP20, including bus base module and Axioline F connectors
- 2702464 - Axioline F, Temperature recording module, Analog inputs: 8 (8 inputs for thermocouples or linear voltage, plus 1 input -5 V to +5 V), connection technology: 2-conductor (shielded, twisted pair), transmission speed in the local bus: 100 Mbps, Extreme conditions version, degree of protection: IP20, including bus base module and Axioline F connectors