Official Distributor
SKU
MPN
QUINT4-CAP/24DC/3.8/1KJ/PT
Weight
0.605 kg
Series QUINT4-CAP
QUINT4-CAP/24DC/3.8/1KJ/PT - Capacity module
QUINT capacity module with maintenance-free double-layer capacitor-based energy storage for DIN rail mounting, input: 24 V DC, output: 24 V DC / 3.8 A / 1 kJ
- Maintenance-free with a long service life
- Space savings, thanks to the compact design
- Long buffer time, thanks to high memory capacity
Technical Specifications
Input data
Input Voltage | 24 V DC (SELV) |
Input voltage range | 22.5 V DC ... 30 V DC |
Fixed backup threshold | < 22 V DC |
Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max) | 4.3 A |
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0) | 0.08 A |
Current consumption Icharge (UN, IOUT = 0, Icharge = max) | 0.43 A |
Buffer time | 9 s (3.8 A) |
Buffer time | 30 s (1 A) |
Charging time | 4 min. (0.43 A) |
Recharging time | 3 min. (0.43 A) |
Output data
Efficiency | > 97 % (with charged energy storage device) |
Connection in parallel | yes |
Connection in parallel | max. 2 (with decoupling module) |
Connection in series | No |
Mains operation
Output Voltage | 24 V DC (depending on the input voltage) |
Output current IN | 3.8 A |
Output power POUT (UN, IOUT = IN) | 91.2 W |
Maximum no-load power dissipation | < 2 W |
Battery operation
Output Voltage | 24 V DC |
Output current IN | 3.8 A |
General
Capacity | 1 kJ |
Storage medium | Double-layer capacitor |
Buffer time | 9 s (3.8 A) |
Buffer time | 30 s (1 A) |
Conductor connection
Connection Method | Push-in connection |
rigid | 0.2 mm² ... 2.5 mm² |
flexible | 0.2 mm² ... 2.5 mm² |
flexible with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
flexible with ferrule with plastic sleeve | 0.25 mm² ... 2.5 mm² |
rigid (AWG) | 24 ... 14 |
Stripping length | 10 mm |
Connection Method | Push-in connection |
rigid | 0.2 mm² ... 2.5 mm² |
flexible | 0.2 mm² ... 2.5 mm² |
flexible with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
flexible with ferrule with plastic sleeve | 0.25 mm² ... 2.5 mm² |
rigid (AWG) | 24 ... 14 |
Stripping length | 10 mm |
Connection Method | Push-in connection |
rigid | 0.2 mm² ... 2.5 mm² |
flexible | 0.2 mm² ... 2.5 mm² |
flexible with ferrule without plastic sleeve | 0.25 mm² ... 2.5 mm² |
flexible with ferrule with plastic sleeve | 0.25 mm² ... 2.5 mm² |
rigid (AWG) | 24 ... 14 |
Stripping length | 10 mm |
Signal state Remote
Connection labeling | 3.3 |
State (configurable) | Remote |
State condition | Remote |
Signal state UIN OK
Connection labeling | 3.1 |
Switching output | Transistor output, active |
State (configurable) | UIn OK |
Output Voltage | 24 V (UN - 1 V (typical)) |
Output can be loaded | 20 mA |
LED status indicator | green (UIn OK) |
Signal threshold | Input voltage in the valid range |
Signal state Ready
Connection labeling | 3.2 |
Switching output | Transistor output, active |
State (configurable) | Ready |
State condition (configurable) | State of charge = 100% or buffer mode |
Output Voltage | 24 V (UN - 1 V (typical)) |
Output can be loaded | 20 mA |
Signal ground SGnd
Connection labeling | 3.4 |
Function | Signal ground |
Reference potential | UIn OK (3.1), Ready (3.2), Remote (3.3) |
Electrical properties
Insulation voltage input, output / housing | 500 V |
Product properties
Product family | QUINT capacity module |
MTBF (IEC 61709, SN 29500) | 996550 h (40 °C) |
MTBF (IEC 61709, SN 29500) | 1631804 h (25 °C) |
MTBF (IEC 61709, SN 29500) | 449865 h (60 °C) |
Insulation characteristics
Protection class | III |
Overvoltage category | II |
Degree of pollution | 2 |
Item dimensions
Width | 85 mm |
Height | 102.5 mm |
Depth | 90 mm |
Installation dimensions
Installation distance right/left | 0 mm / 0 mm |
Installation distance top/bottom | 50 mm / 50 mm |
Mounting
Mounting Type | DIN rail mounting |
Assembly instructions | alignable: horizontally 0 mm, vertically 50 mm |
Mounting Position | Any, on NS 35 DIN rail |
Material specifications
Housing Material | Plastic |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | -25 °C ... 60 °C |
Ambient temperature (storage/transport) | -40 °C ... 60 °C |
Ambient temperature (start-up type tested) | -40 °C |
Maximum altitude | ≤ 4000 m |
Climatic class | 3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) | ≤ 95 % |
UL
Identification | UL Listed UL 61010-1 |
Identification | UL Listed UL 61010-2-201 |
Identification | UL 121201 |
CSA
Identification | CSA C22.2 No. 223 class 2 (buffer mode) |
Identification | CAN/CSA-C22.2 No. 61010-1-12 |
Identification | CAN/CSA C22.2 No. 61010-2-201:14 |
Identification | CSA C22.2 No. 213-17 |
UL NEC
Identification | UL 1310 class 2 (buffer mode) |
CB scheme
Identification | IEC 61010-1 |
Identification | IEC 61010-2-201 |
Identification | EN 61010-1 |
Identification | EN 61010-2-201 |
EMC data
Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise emission | EN 61000-6-3 |
Electrostatic discharge
Standards/regulations | EN 61000-4-2 |
Contact discharge | 6 kV (Test Level 3) |
Discharge in air | 8 kV (Test Level 3) |
Comments | Criterion B |
Electromagnetic HF field
Standards/regulations | EN 61000-4-3 |
Frequency Range | 80 MHz ... 6 GHz |
Test field strength | 10 V/m |
Comments | Criterion A |
Fast transients (burst)
Standards/regulations | EN 61000-4-4 |
Input | 2 kV (Test Level 3 - asymmetrical) |
Output | 2 kV (Test Level 3 - asymmetrical) |
Signal | 2 kV (Test Level 4 - asymmetrical) |
Comments | Criterion B |
Surge voltage load (surge)
Standards/regulations | EN 61000-4-5 |
Input | 1 kV (Test Level 3 - symmetrical) |
Input | 2 kV (Test Level 3 - asymmetrical) |
Output | 1 kV (Test Level 3 - symmetrical) |
Output | 2 kV (Test Level 3 - asymmetrical) |
Signal | 1 kV (Test Level 1 - asymmetrical) |
Comments | Criterion B |
Conducted interference
Standards/regulations | EN 61000-4-6 |
Frequency Range | 0.15 MHz ... 80 MHz |
Comments | Criterion A |
Voltage | 10 V |
Criteria
Criterion A | Normal operating behavior within the specified limits. |
Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Accessories
Why Proax for Phoenix Contact 2320526?
Proax is an authorized distributor of Phoenix Contact 2320526 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended
- 2320539 - QUINT capacity module, with maintenance-free energy storage based on double-layer capacitor, DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A / 4 kJ incl. mounted UTA 107 universal DIN rail adapter. The “POWER MANAGEMENT SUITE” software (Item No. 1252232) available in the download area can be used for configuration.
- 2320571 - QUINT capacity module, with maintenance-free energy storage based on double-layer capacitor, DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A / 8 kJ incl. mounted UTA 107 universal DIN rail adapter. The “POWER MANAGEMENT SUITE” software (Item No. 1252232) available in the download area can be used for configuration.