Official Distributor
SKU
MPN
QUINT4-BUFFER/24DC/40
Weight
1.416 kg
This product is Not Cancellable/Not Returnable
Series QUINT4-BUFFER
QUINT4-BUFFER/24DC/40 - Buffer module
QUINT buffer module with maintenance-free capacitor-based energy storage for DIN rail mounting, input: 24 V DC, output: 24 V DC/40 A, including mounted UTA 107 universal DIN rail adapter.
- Space savings, thanks to the compact design
- Maintenance-free due to electrolytic capacitors
- Thanks to soft start, can also be used with power supplies in the low power range
Technical Specifications
Input data
Input voltage range | 22.5 V DC ... 30 V DC |
Fixed backup threshold | < 22 V DC |
Voltage type of supply voltage | DC |
Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max) | 46 A (max.) |
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0) | 0.2 A (No-load) |
Current consumption Icharge (UN, IOUT = 0, Icharge = max) | 0.8 A (charging process) |
Buffer time | 0.2 s (40 A) |
Buffer time | 2 s (4 A) |
Output data
Efficiency | > 98 % (with charged energy storage device) |
Connection in parallel | no |
Connection in series | No |
Mains operation
Output Voltage | 24 V DC (depending on the input voltage) |
Output current IN | 40 A |
Power loss nominal load max. | < 9 W |
Buffer mode
Output Voltage | typ. 22 V DC |
Output current IN | 40 A (depending on output current) |
Static Boost (IStat.Boost) | 45 A |
Signal state Ready
Connection labeling | 3.3 |
Switching output | Transistor output, active |
State (configurable) | Ready |
State condition (configurable) | State of charge = 100% or buffer mode |
Output Voltage | 24 V (UN - 2 V (typical)) |
Output can be loaded | 20 mA |
Signal state UIN OK
Connection labeling | 3.1, 3.2 |
Switching output | Electronic relays (OptoMOS) |
State (configurable) | UIn OK |
Output Voltage | 30 V DC |
Output can be loaded | 200 mA |
LED status indicator | green (UIn OK) |
Signal threshold | Input voltage in the valid range |
Signal ground SGnd
Connection labeling | 3.4 |
Function | Signal ground |
Reference potential | 3.3 Ready |
Input
Nominal capacity | 2 mAh |
General
IQ-Technology | no |
Electrical properties
Insulation voltage input, output / housing | 500 V |
Product properties
Product family | QUINT BUFFER |
MTBF (IEC 61709, SN 29500) | 2813895 h (40 °C) |
Insulation characteristics
Protection class | Special application (SELV input voltage, hazardous voltages are generated in the device). |
Overvoltage category | I |
Degree of pollution | 2 |
Life expectancy (electrolytic capacitors)
Time | 71660 h |
Item dimensions
Width | 72 mm |
Height | 130 mm |
Depth | 125 mm |
Installation dimensions
Installation distance right/left | 0 mm / 0 mm |
Installation distance top/bottom | 50 mm / 50 mm |
Mounting
Assembly instructions | alignable: horizontally 0 mm, vertically 50 mm |
Mounting Position | horizontal DIN rail NS 35, EN 60715 |
Material specifications
Housing Material | Metal |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | -25 °C ... 70 °C (> 40 °C Derating: 0.56 %/K / > 60 °C Derating: 2.5 %/K) |
Ambient temperature (storage/transport) | -40 °C ... 70 °C |
Ambient temperature (start-up type tested) | -40 °C |
Maximum altitude | ≤ 4000 m |
Climatic class | 3K3 (in acc. with EN 60721) |
Max. permissible relative humidity (operation) | ≤ 95 % |
Electrical safety
Standard designation | Electrical safety |
Standards/specifications | IEC 60950-1/VDE 0805 (SELV) |
UL
Identification | UL Listed UL 508 |
Identification | UL/C-UL Recognized UL 60950-1 |
EMC data
Low Voltage Directive | Conformance with Low Voltage Directive 2014/35/EC |
EMC requirements for noise emission | EN 61000-6-3 |
EMC requirements for noise emission | EN 61000-6-4 |
EMC requirements for noise immunity | EN 61000-6-1 |
EMC requirements for noise immunity | EN 61000-6-2 |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Noise emission | EN 55016 |
Noise emission | EN 61000-6-3 |
Electrostatic discharge
Standards/regulations | EN 61000-4-2 |
Contact discharge | 6 kV (Test Level 3) |
Discharge in air | 8 kV (Test Level 3) |
Comments | Criterion A |
Electromagnetic HF field
Standards/regulations | EN 61000-4-3 |
Frequency Range | 80 MHz ... 6 GHz |
Test field strength | 10 V/m |
Comments | Criterion A |
Fast transients (burst)
Standards/regulations | EN 61000-4-4 |
Input | 2 kV (Test Level 3 - asymmetrical) |
Output | 2 kV (Test Level 3 - asymmetrical) |
Signal | 2 kV (Test Level 3 - asymmetrical) |
Comments | Criterion A |
Surge voltage load (surge)
Input | 2 kV (Test Level 3 - asymmetrical) |
Output | 2 kV (Test Level 3 - asymmetrical) |
Conducted interference
Standards/regulations | EN 61000-4-6 |
Frequency Range | 0.15 MHz ... 80 MHz |
Comments | Criterion A |
Voltage | 10 V |
Criteria
Criterion A | Normal operating behavior within the specified limits. |
Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
Accessories
Why Proax for Phoenix Contact 2908283?
Proax is an authorized distributor of Phoenix Contact 2908283 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended
- 2320539 - QUINT capacity module, with maintenance-free energy storage based on double-layer capacitor, DIN rail mounting, input: 24 V DC, output: 24 V DC / 5 A / 4 kJ incl. mounted UTA 107 universal DIN rail adapter. The “POWER MANAGEMENT SUITE” software (Item No. 1252232) available in the download area can be used for configuration.
- 2320571 - QUINT capacity module, with maintenance-free energy storage based on double-layer capacitor, DIN rail mounting, input: 24 V DC, output: 24 V DC / 10 A / 8 kJ incl. mounted UTA 107 universal DIN rail adapter. The “POWER MANAGEMENT SUITE” software (Item No. 1252232) available in the download area can be used for configuration.