Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
QUINT4-INV/24DC/1AC/600VA/USB
Weight
2.834 kg

QUINT4-INV/24DC/1AC/600VA/USB - DC/AC inverter

QUINT INVERTER, DIN rail mounting, input:24 V DC, output:1AC / 600 VA, Pure sine.

  • Manual selection of AC output voltage via signal terminal enables worldwide use
  • Pure sine curve at the output
  • USB interface for connecting to industrial PCs, for example
  • Can be switched in parallel for various applications
  • Space savings, thanks to the compact design
Technical Specifications

Input data

Input Voltage24 V DC
Input voltage range DC20 V DC ... 30 V DC
Current consumptiontyp. 23 A
Current consumptionmax. 28 A

Signal Remote

Connection labeling3.8
Signalization designationRemote
Low signalConnection to SGnd with < 2.7 kΩ
High signalOpen (> 35 kΩ between Remote and SGnd)

Signal Start 230V

Connection labeling3.6
Signalization designationStart 230V
Low signalConnection to SGnd with < 2.7 kΩ
High signalOpen (> 200 kΩ between Start and SGnd)

Signal Start 120V

Connection labeling3.7
Signalization designationStart 120V
Low signalConnection to SGnd with < 2.7 kΩ
High signalOpen (> 200 kΩ between Start and SGnd)

Output data

Efficiency> 86 % (120 V AC)
Efficiency> 87 % (230 V AC)
Output Voltage120 V AC ±2 % (100 V AC / 6 A...130 V AC / 4,6 A)
Output Voltage230 V AC ±2 % (200 V AC / 3 A...240 V / 2,5 A)
Form of output voltagePure sine
Nominal output current (IN)5 A (120 V AC)
Nominal output current (IN)2.6 A (230 V AC)
Maximum no-load power dissipationtyp. 21 W (120 V AC)
Maximum no-load power dissipationtyp. 21 W (230 V AC)
Power loss nominal load max.typ. 72 W (120 V AC)
Power loss nominal load max.typ. 66 W (230 V AC)
Nominal output frequency60 Hz 50 Hz ±0.5 %
Derating50 °C ... 60 °C (2.5 %/K)
Apparent power600 VA
Real power480 W
Power factor (cos phi)0.8
Crest factor2.8
Total harmonic distortion factor (THD)< 3 % (linear load)
Total harmonic distortion factor (THD)< 8 % (non-linear load)
Connection in parallelyes
Connection in parallelmax. 3
Connection in seriesNo
Overload capacity Mains operation105 % (Permanent)
Overload capacity Mains operation120 % ... 150 % (20 s / 5 s, then shutdown)
Electronic current limitation> 2,5 x IN (> 200 ms)

Signal AC OK

Connection labeling3.2
Signalization designationAC OK
Type of signalingGreen LED
Switching outputTransistor output, active
Output Voltage24 V
Continuous load current≤ 20 mA
LED status indicatorgreen

Signal Alarm

Connection labeling3.1
Signalization designationAlarm
Type of signalingLED red
Switching outputTransistor output, active
Output Voltage24 V
Continuous load current≤ 20 mA
LED status indicatorred

Signal DC OK

Connection labeling3.3
Signalization designationDC OK
Switching outputTransistor output, active
Output Voltage24 V
Continuous load current≤ 20 mA
LED status indicatorgreen

Signal Parallel run

Connection labeling3.5
Signalization designationParallel run
Switching outputTransistor output, active
Continuous load current≤ 20 mA

Signal P>Pn

Connection labeling3.4
Signalization designationP>Pn
Switching outputTransistor output, active
Continuous load current≤ 20 mA
LED status indicatorgreen

Signal ground SGnd

Connection labeling3.9
FunctionSignal ground
Reference potentialFor signal inputs and signal outputs

Input

Position1.x

Conductor connection

Connection MethodScrew connection
rigid0.2 mm² ... 6 mm²
flexible0.2 mm² ... 4 mm²
flexible with ferrule without plastic sleeve0.2 mm² ... 4 mm²
flexible with ferrule with plastic sleeve0.2 mm² ... 4 mm²
rigid (AWG)30 ... 10
Stripping length8 mm
Tightening torque0.5 Nm ... 0.6 Nm
Drive form screw headSlotted L

Output

Position2.x

Conductor connection

Connection MethodScrew connection
rigid0.2 mm² ... 6 mm²
flexible0.2 mm² ... 4 mm²
flexible with ferrule without plastic sleeve0.2 mm² ... 4 mm²
flexible with ferrule with plastic sleeve0.2 mm² ... 4 mm²
rigid (AWG)30 ... 10
Stripping length8 mm
Tightening torque0.5 Nm ... 0.6 Nm
Drive form screw headSlotted L

Signal

Position3.x

Conductor connection

Connection MethodScrew connection
rigid0.2 mm² ... 1.5 mm²
flexible0.2 mm² ... 1.5 mm²
flexible with ferrule without plastic sleeve0.2 mm² ... 1.5 mm²
flexible with ferrule with plastic sleeve0.2 mm² ... 1.5 mm²
rigid (AWG)30 ... 12
Stripping length8 mm
Tightening torque0.5 Nm ... 0.6 Nm
Drive form screw headSlotted L

Interfaces

InterfaceUSB (Modbus/RTU)
Number of interfaces1
Connection MethodMINI-USB Type B
Connection marking5.1
LockingScrew
Transmission physicsUSB 2.0
Featureslockable
Maximum cable length3 m
Electrical isolationyes
InterfaceParallel Port
Number of interfaces1
Connection MethodRJ45
Connection marking5.2
LockingLocking clip
Electrical isolationyes

Electrical properties

Number of phases1.00

Product properties

Product familyQUINT INVERTER
MTBF (IEC 61709, SN 29500)532525 h (40 °C)

Insulation characteristics

Protection classI
Degree of pollution2

Item dimensions

Width180 mm
Height130 mm
Depth125 mm

Installation dimensions

Installation distance right/left0 mm / 0 mm
Installation distance top/bottom50 mm / 50 mm

Mounting

Mounting TypeDIN rail mounting

Material specifications

Housing MaterialMetal

Ambient conditions

Degree of ProtectionIP20
Ambient Temperature (Operation)-25 °C ... 60 °C (> 50 °C: 2,5 % / K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Maximum altitude≤ 3000 m (> 2000 m: 0,6 % / 100 m)
Max. permissible relative humidity (operation)≤ 95 %
Shock20g in all directions (EN 60068-2-27)
Vibration (Operation)5 Hz ... 100 Hz, 0.7g (EN 60068-2-6)

Overvoltage category

EN 61010-2-201II

UL

IdentificationUL/C-UL Recognized UL 1778
IdentificationUL/C-UL Listed UL 61010-1
IdentificationUL/C-UL Listed UL 61010-2-201

EMC data

Low Voltage DirectiveConformance with Low Voltage Directive 2014/35/EC
Interference emissionNoise emission in accordance with EN 61000-6-4
Noise immunityImmunity in accordance with EN 61000-6-2
Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Conducted noise emissionEN 61000-6-4

Electrostatic discharge

Standards/regulationsEN 61000-4-2
Contact discharge± 6 kV
Discharge in air± 8 kV
CommentsCriterion A

Electromagnetic HF field

Standards/regulationsEN 61000-4-3
Frequency Range80 MHz ... 6 GHz
Test field strength10 V/m
CommentsCriterion A

Fast transients (burst)

Standards/regulationsEN 61000-4-4
Input± 2 kV
Output± 2 kV
Signal± 2 kV
Signal± 2 kV (USB)
CommentsCriterion A (B for USB)

Surge voltage load (surge)

Standards/regulationsEN 61000-4-5
Input± 1 kV (symmetrical)
Input± 2 kV (asymmetrical)
Output± 1 kV (symmetrical)
Output± 2 kV (asymmetrical)
Signal1 kV (asymmetrical)
CommentsCriterion B

Conducted interference

Standards/regulationsEN 61000-4-6
Frequency Range0.15 MHz ... 80 MHz
Signal10 V
CommentsCriterion A

Power frequency magnetic field

Standards/regulationsEN 61000-4-8
Frequency50 Hz
Frequency60 Hz
Signal30 A/m
CommentsCriterion A

Criteria

Criterion ANormal operating behavior within the specified limits.
Criterion BTemporary impairment to operational behavior that is corrected by the device itself.
Accessories

Why Proax for Phoenix Contact 1067325?

Proax is an authorized distributor of Phoenix Contact 1067325 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Available for order

Phoenix Contact Availability