Proax

Currency
0 Items
proax logo
Cart
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
MINI-PS-100-240AC/24DC/1
Weight
0.248 kg
This product has been discontinued and replaced with 2904597
Series MINI-PS

MINI-PS-100-240AC/24DC/1 - Power supply unit

Please use the following items in new systems: 2904597 or 2909575DIN rail power supply, 24 V DC/1 A, primary-switched, narrow design

Technical Specifications

AC operation

Nominal input voltage range100 V AC ... 240 V AC
Input voltage range85 V AC ... 264 V AC
Input voltage range90 V DC ... 350 V DC
Input Voltage Range AC85 V AC ... 264 V AC
Input voltage range DC90 V DC ... 350 V DC
Voltage type of supply voltageAC/DC
Inrush Current< 15 A (typical)
AC frequency range45 Hz ... 65 Hz
Frequency range DC0 Hz
Mains buffering time> 20 ms (120 V AC)
Mains buffering time> 110 ms (230 V AC)
Current consumption0.5 A (85 V AC)
Current consumption0.2 A (264 V AC)
Current consumptionapprox. 0.4 A (90 V DC)
Current consumptionapprox. 0.1 A (350 V DC)
Nominal Power Consumption45 VA
Typical response time< 0.2 s
Input fuse1.25 A (slow-blow, internal)

Output data

Efficiency> 80 % (for 230 V AC and nominal values)
Output characteristicU/I
Nominal Output Voltage24 V DC ±1 %
Setting range of the output voltage (USet)22.5 V DC ... 28.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN)1 A (up to 60 °C)
POWER BOOST (IBoost)1.3 A
Residual ripple< 100 mVPP
Output Power24 W
Peak switching voltages nominal load< 100 mVPP (20 MHz)
Maximum no-load power dissipation< 1.4 W
Power loss nominal load max.< 4.5 W
Connection in parallelyes, for assembling redundant systems and increasing efficiency
Connection in seriesyes

Signal: Active

Output descriptionUOUT > 21.5 V: High signal
Output Voltage+ 24 V (Signal)
Continuous load currentmax. 20 mA

Input

Connection MethodPluggable screw connection
Conductor cross section, rigid min.0.2 mm²
Conductor cross section, rigid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.14
Stripping length7 mm
Screw threadM3

Output

Connection MethodPluggable screw connection
Conductor cross section, rigid min.0.2 mm²
Conductor cross section, rigid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.14
Stripping length7 mm

Signaling

Operating voltage displayGreen LED

Signal output: Active

Status displayGreen LED (Uout > 21,5 V DC: LED permanently lit)

Electrical properties

Number of phases1.00
Insulation voltage input/output3 kV (routine test)
Insulation voltage input/output3 kV (type test)

Product properties

Product familyMINI POWER
MTBF (IEC 61709, SN 29500)> 500000 h

Insulation characteristics

Protection classII (in closed control cabinet)
Overvoltage categoryIII

Dimensions

Width22.5 mm
Height99 mm
Depth114.5 mm

Installation dimensions

Installation distance right/left0 mm / 0 mm
Installation distance top/bottom50 mm / 50 mm

Mounting

Assembly instructionsalignable: vertical with spacing = 5 cm, horizontal with zero spacing
Mounting PositionOn horizontal DIN rail NS 35 in acc. with EN 60715
With protective coatingNo

Material specifications

Housing MaterialPlastic
Type of housingPolyamide PA, color: green

Ambient conditions

Degree of ProtectionIP20
Ambient Temperature (Operation)-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Max. permissible relative humidity (operation)95 % (at 25 °C, non-condensing)

Standards and Regulations

Standard - Electrical safetyEN 60950-1/VDE 0805 (SELV)
Standard - Safe isolationDIN VDE 0100-410

Approvals

UL approvalsUL/C-UL Listed ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D

Conformity/Approvals

SIL in accordance with IEC 615080

EMC data

EMC requirements for noise emissionEN 61000-6-3
EMC requirements for noise emissionEN 61000-6-4
EMC requirements for noise immunityEN 61000-6-1
EMC requirements for noise immunityEN 61000-6-2
Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Noise emissionEN 55011 (EN 55022)

Why Proax for Phoenix Contact 2938840?

Proax is an authorized distributor of Phoenix Contact 2938840 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability