Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 2938837
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
MINI-PS-100-240AC/24DC/4
Weight
0.496 kg
Series MINI-PS

MINI-PS-100-240AC/24DC/4 - Power supply unit

Please use the following items in new systems: 2904599 or 2909577Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/4 A

  • Easy-maintenance connection technology thanks to keyed COMBICON connectors
  • Remote monitoring of output voltage via switching output
Technical Specifications

AC operation

Nominal input voltage range100 V AC ... 240 V AC
Input voltage range85 V AC ... 264 V AC
Input voltage range90 V DC ... 350 V DC
Input Voltage Range AC85 V AC ... 264 V AC
Input voltage range DC90 V DC ... 350 V DC
Voltage type of supply voltageAC/DC
Inrush Current< 15 A (typical)
Inrush current integral (I2t)2.1 A2s
AC frequency range45 Hz ... 65 Hz
Mains buffering time> 20 ms (120 V AC)
Mains buffering time> 100 ms (230 V AC)
Current consumption1.3 A (120 V AC)
Current consumption0.8 A (230 V AC)
Current consumption1.3 A (90 V DC)
Current consumption0.4 A (350 V DC)
Nominal Power Consumption158 VA
Protective circuitTransient surge protection; Varistor
Typical response time< 0.4 s
Input fuse3.15 A (slow-blow, internal)
Recommended breaker for input protection6 A ... 16 A (Characteristics B, C, D, K)

Output data

Efficiency> 88 % (for 230 V AC and nominal values)
Output characteristicU/I
Nominal Output Voltage24 V DC ±1 %
Setting range of the output voltage (USet)22.5 V DC ... 28.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN)4 A (-25 °C ... 60 °C)
POWER BOOST (IBoost)5 A (-25 °C ... 40 °C permanent)
Derating60 °C ... 70 °C (2.5 %/K)
Feedback voltage resistance35 V DC
Protection against overvoltage at the output (OVP)≤ 35 V DC
Starting delay with capacitive loadunrestricted
Max. capacitive loadunlimited
Active current limitationapprox 9 A (in the event of a short-circuit)
Control deviationchange in load, static 10 % ... 90 %
Control deviation< 3 % (change in load, dynamic 10 % ... 90 %)
Control deviation< 0.1 % (change in input voltage ±10 %)
Residual ripple< 20 mVPP (20 MHz)
Output Power96 W
Peak switching voltages nominal load< 100 mVPP (20 MHz)
Maximum no-load power dissipation2.5 W
Power loss nominal load max.12 W
Rise time< 1.2 ms
Connection in parallelyes, for redundancy and increased capacity
Connection in seriesyes

Signal: DC OK, status indicator

Output descriptionUOUT > 21.5 V: High signal
Maximum Switching Voltage≤ 24 V
Output Voltage+ 24 V (Signal)
Continuous load current≤ 20 mA

Input

Connection MethodPluggable screw connection
Conductor cross section, rigid min.0.2 mm²
Conductor cross section, rigid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Stripping length7 mm
Screw threadM3

Output

Connection MethodPluggable screw connection
Conductor cross section, rigid min.0.2 mm²
Conductor cross section, rigid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Stripping length7 mm
Screw threadM3
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm

Signal

Connection MethodPluggable screw connection
Conductor cross section, rigid min.0.2 mm²
Conductor cross section, rigid max.2.5 mm²
Conductor cross section flexible min.0.2 mm²
Conductor cross section flexible max.2.5 mm²
Conductor cross section AWG min.24
Conductor cross section AWG max.12
Screw threadM3
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm

Signaling

Types of signalingLED
Types of signalingActive switching output
Operating voltage displayGreen LED

Signal output: DC OK, status indicator

Status display"DC OK" LED green
Note on status displayUOUT > 21.5 V: LED lights up

Electrical properties

Insulation voltage input/output3 kV (type test)
Insulation voltage input/output3 kV (routine test)

Product properties

Product familyMINI POWER
MTBF (IEC 61709, SN 29500)> 815000 h (40 °C)

Insulation characteristics

Protection classII (in closed control cabinet)
Overvoltage categoryIII
Degree of pollution2

Dimensions

Width67.5 mm
Height99 mm
Depth107 mm

Installation dimensions

Installation distance right/left0 mm / 0 mm
Installation distance top/bottom50 mm / 50 mm

Mounting

Mounting TypeDIN rail mounting
Assembly instructionsalignable: horizontally 0 mm, vertically 50 mm
Mounting Positionhorizontal DIN rail NS 35, EN 60715
With protective coatingNo

Material specifications

Housing MaterialPlastic
Type of housingPolyamide PA, color: green

Ambient conditions

Degree of ProtectionIP20
Ambient Temperature (Operation)-25 °C ... 70 °C (> 60 °C Derating: 2,5 %/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Climatic class3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)
Shock18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (Operation)< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6)
Vibration (Operation)15 Hz ... 150 Hz, 2.3g, 90 min.

Standards and Regulations

Rail applicationsEN 50121-4
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)
Standard – Limitation of mains harmonic currentsEN 61000-3-2
Standard - Electrical safetyEN 60950-1/VDE 0805 (SELV)
Standard – Safety extra-low voltageEN 60950-1 (SELV)
Standard – Safety extra-low voltageEN 60204 (PELV)
Standard - Safe isolationDIN VDE 0100-410

Approvals

UL approvalsUL/C-UL listed UL 508
UL approvalsUL/C-UL Recognized UL 60950-1
UL approvalsUL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location)

Conformity/Approvals

SIL in accordance with IEC 615080

EMC data

Low Voltage DirectiveConformance with Low Voltage Directive 2014/35/EC
EMC requirements for noise emissionEN 61000-6-3
EMC requirements for noise emissionEN 61000-6-4
EMC requirements for noise immunityEN 61000-6-1
EMC requirements for noise immunityEN 61000-6-2
Electromagnetic compatibilityConformance with EMC Directive 2014/30/EU
Noise emissionEN 55011 (EN 55022)

Electrostatic discharge

Standards/regulationsEN 61000-4-2
HousingLevel 3
Contact discharge8 kV
Discharge in air8 kV
CommentsCriterion B

Electromagnetic HF field

Standards/regulationsEN 61000-4-3
Frequency Range80 MHz ... 1 GHz
Test field strength10 V/m
Frequency Range1 GHz ... 2 GHz
Test field strength3 V/m
Frequency Range2 GHz ... 2.7 GHz
Test field strength1 V/m
CommentsCriterion A

Fast transients (burst)

Standards/regulationsEN 61000-4-4
Input4 kV (level 4 - asymmetrical: conductor to ground)
Output2 kV (level 3 - asymmetrical: conductor to ground)
Signal1 kV (level 2 - asymmetrical: conductor to ground)
CommentsCriterion B

Surge voltage load (surge)

Standards/regulationsEN 61000-4-5
Input4 kV (level 4 - asymmetrical: conductor to ground)
Input2 kV (level 4 - symmetrical: conductor to conductor)
Output0.5 kV (level 1 - asymmetrical: conductor to ground)
Output0.5 kV (level 1 - symmetrical: conductor to conductor)
Signal0.5 kV (level 1 - asymmetrical: conductor to ground)
CommentsCriterion B

Conducted interference

Standards/regulationsEN 61000-4-6
I/O/SLevel 3 - asymmetrical
Frequency Range0.15 MHz ... 80 MHz
CommentsCriterion A
Voltage10 V

Voltage dips

Standards/regulationsEN 61000-4-11

Emitted interference

Standards/regulationsEN 61000-6-3
Radio interference voltage in acc. with EN 55011EN 55011 (EN 55022) Class B, area of application: Industry and residential
Emitted radio interference in acc. with EN 55011EN 55011 (EN 55022) Class B, area of application: Industry and residential

Why Proax for Phoenix Contact 2938837?

Proax is an authorized distributor of Phoenix Contact 2938837 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended
  • Phoenix Contact2938840
    2938840
    2938840 - Please use the following items in new systems: 2904597 or 2909575DIN rail power supply, 24 V DC/1 A, primary-switched, narrow design
  • Phoenix Contact2866446
    2866446
    2866446 - Please use the following items in new systems: 2904597 or 2909575Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.3 A
  • Phoenix Contact2866653
    2866653
    2866653 - Please use the following item in new systems: 2904614Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A, for potentially explosive areas
  • Phoenix Contact2938730
    2938730
    2938730 - Please use the following items in new systems: 2904598 or 2909576Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/2 A
  • Phoenix Contact2866336
    2866336
    2866336 - Please use the following items in new systems: 2904599 or 2909577Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/100 W
  • Phoenix Contact2866912
    2866912
    2866912 - Power supply unit
  • Phoenix Contact2938756
    2938756
    2938756 - Please use the following item in new systems: 2904605Primary-switched MINI POWER power supply for DIN rail mounting, input: 1-phase, output: 10 V DC ... 15 V DC/2 A
  • Phoenix Contact2866297
    2866297
    MINI-PS-100-240AC/10-15DC/8, MINI POWER power supplies for MCR technologyIn measurement and control technology (MCR), modular electronics housing has become the industry standard. MINI POWER is the power supply unit to go with it. The devices are flexible, thanks to special voltages and special versions.
  • Phoenix Contact2938743
    2938743
    MINI-PS-100-240AC/2X15DC/1, MINI POWER power supplies for MCR technologyIn measurement and control technology (MCR), modular electronics housing has become the industry standard. MINI POWER is the power supply unit to go with it. The devices are flexible, thanks to special voltages and special versions.
  • Phoenix Contact2938714
    2938714
    MINI-PS-100-240AC/ 5DC/3, MINI POWER power supplies for MCR technologyIn measurement and control technology (MCR), modular electronics housing has become the industry standard. MINI POWER is the power supply unit to go with it. The devices are flexible, thanks to special voltages and special versions.
  • Phoenix Contact2320199
    2320199
    2320199 - The AC feed module supplies the MINI DC/DC converter with a rectified and filtered supply voltage.
  • Phoenix Contact2866284
    2866284
    2866284 - Please use the following items in new systems: 1066703, 1066716, 1066718, 1066714.Primary-switched MINI DC/DC converter for DIN rail mounting, input: 12 - 24 V DC, output: 24 V DC/1 A
  • Phoenix Contact2320021
    2320021
    2320021 - Please use the following item in new systems: 1098676.Primary-switched MINI DC/DC converter for DIN rail mounting, input: 12 - 24 V DC, output: 48 V DC/0.7 A
  • Phoenix Contact2320018
    2320018
    Pour les installations neuves, utilisez l'article suivant : 1066704.Convertisseur DC/DC MINI à découpage primaire pour montage sur rail DIN, entrée : 12 V DC ... 24 V DC, sortie : 5 V DC ... 15 V DC/2 A
  • Phoenix Contact2866271
    2866271
    Pour les installations neuves, utilisez l'article suivant : 1066708.Convertisseur DC/DC MINI à découpage primaire pour montage sur rail DIN, entrée : 48-60 V DC, sortie : 24 V DC/1 A
  • Phoenix Contact2866983
    2866983
    Power supply unit - MINI-SYS-PS-100-240AC/24DC/1.5

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability